These LED vaporproof light fixtures are only compatible with From top to bottom: fixtures with cool white, natural white, and warm white ballast-bypass LED T8 tube light bulbs

The weatherproof fixture is dust tight as well as water and impact resistant with a shatterproof polycarbonate lens. A water-tight cord connector, quick-connect wiring adapter, T8 sockets, housing clips, and surface-mount brackets are included. The T8 LED vaporproof light fixture operates within a 100-277V AC range and is covered by a lifetime warranty (fixture only).

When you open the door to your home, you are instantly hit with a first impression—so are your visitors. If you are selling your home, that first impression starts outside, but walking through the front door is where you really have the chance to impress a potential buyer. Your home is your castle and you want it to look as nice as possible. It doesn’t have to be a mega mansion or a brand new home to be gorgeous. You can make your home look like a million dollars with some simple adjustments like paint, décor, flooring and lighting. One of the ways to really impress the second that front door is opened is with a chandelier in the foyer or entry way. This is something that can be handled by an electrician. Pasadena homeowners will be amazed at the difference an entryway chandelier changes the entire look of the home. At The Electric Connection, we can help you be proud of your home.

A chandelier gives a room a very elegant feel. Beautiful glass combined with light creates a beautiful sight. This is what you will see when you open that door every day. The chandelier can be accompanied with a dimmer switch installed by an electrician in Pasadena. It gives you the luxury of having full light on a dark night or just a little night light for when you get home after dark.

Chandeliers are not just for the entry way. They are beautiful pieces in a dining room or a sitting room as well. Their simple elegance is enough to be a main focal point in a room with very little other décor needed. You can choose to go big or go small. Your Pasadena electrician will take care of all of the installation for you, even if there isn’t an existing light in the room. Give The Electric Connection a call today and schedule your chandelier installation.

Solving electrical problems and doing electrical repairs can be risky things to do if you don’t know exactly what you are doing.  Sometimes it is absolutely necessary to hire a certified electrician to do these things for you so that you don’t put yourself or your property at risk.  Here are some key things you should keep in mind when choosing an electrician.

Certifications: You should always feel free to ask an electrician about their certifications; if they aren’t willing to answer your questions about it, they probably aren’t the right electrician for you.  There are different levels of training that an electrician must go through before earning certifications.  Typically, they start out as an electrician apprentice working under the direct supervision of a journeyman and the general supervision of a master electrician.  A master electrician has the highest level of certification and more experience than an apprentice or a journeyman.

References: A good electrician should always be able to give you references if you ask for them.  Any hesitation in this area is not a good sign.  It is a good idea to check with the references that the electrician gives you before hiring them.

Insurance: It is very important to hire an electrician that carries the proper insurance.  Without proper insurance, you could be responsible for any damages they happen to cause, such as an electrical fire or other accidents. Did you know that electricians are only required to have $300,000 worth of coverage? Be sure to confirm that you are hiring an insured electrician.

Communication: It is also important for the electrician you hire to have great communication skills.  They should be friendly, courteous, interested in your problem, and listen to your concerns.  They should also be upfront about costs and give you an estimate of how long the project should take.

Keep all of these things in mind as you seek out someone for electrical consulting.  For Dallas electrical repairs, www.ElectricManInc.com offers 27 years of industry experience, and they are open 24 hours a day.  They have a master electrician on staff, they are properly insured, and they offer free estimates.

About ElectricMan Inc.

ElectricMan Inc. is one of Dallas’ most trusted electricians. Nick Schaeffer, Mr. ElectricMan himself, has quite the resume for a master electrician. He started the company by himself in 2004 and hasn’t looked back since! For more information about Electricman’s list of electrical repair services, please visit www.ElectricManInc.com

RGB LED strip lights are a great way to add a pop of color to your above-ground pool. These low-voltage LED lights can be applied to the inside rim of your pool or around your pool deck. With RGB LED strip lights, you can choose from a ton of dynamic color-changing and single-color modes with adjustable brightness and speed control. They’re great for parties or late-night swims and can be easily installed. We’ve included installation instructions for our waterproof LED strip lights. Some cities require above-ground pool lighting to meet National Electrical Code (NEC) Article 680 standards, which would limit possible pool lighting installation locations. Before you purchase LED pool lights, check your city’s code requirements. We also recommend that you have a certified electrician install your lights.

1) Before ordering your LED strip lights, measure the diameter of your pool and multiply by 3.14 to find its circumference; this number indicates the total length of strip that you will need. The 21-foot pool used for these installation instructions has a circumference of 65.94 feet and requires 4 runs of 16-foot LED strips.

You will also need to measure the distance between where your power supply will be and both sides of your pool where the amplifiers will be installed (see the setup and wiring illustration below). These distances will tell you how much 18-gauge wire you’ll need for connecting the amplifiers to power. Make sure to account for the distance of any dips or turns that the wires may take along their paths.

Lastly, measure the approximate distance that will be between your controller and where your strip lights begin. This distance will tell you how much 22-gauge wire you’ll need for connecting the controller to your strips. You will also need two small sections of this wire for connecting your first and second strip lights to the amplifiers.

2) Before you’re ready to install your LED strip lights, be sure to drain your pool. Begin by creating or locating a dry area away from your pool for the power supply. The power supply should be contained in a weatherproof box. Power supplies should be installed between a ground fault circuit interrupter (GFCI) protected circuit and the pool’s junction box. It’s crucial to use a GFCI protected circuit as it shuts off if current flows where it’s not supposed to.

Wire the included plug to the power supply, but do not connect to power until the installation is complete.

3) Connect your RGB LED controller to the power supply. Cut the barrel off of the controller wiring. Strip back the remaining wires, and connect its wires to the power supply.

4) Cut the LC2 connector off of the remaining end of the controller, and strip back the wires. Run 22-gauge four-conductor wire to connect the controller to your low-voltage pool lights; use dolphin connectors to join like-colored wires. Connect your first two LED strip lights to the controller by joining each set of like-colored wire with a dolphin connector. You should be connecting four wires of each color (red, blue, green, and black) together. For added protection, cover all wire connections in this installation with electrical tape.

5) You will apply strip 1 clockwise around your pool rim and strip 2 counterclockwise. If you have a flat surface, use mounting clips to secure the strips in place as you go. If you want to mount the strips under your pool rim, drill small holes in the trusses approximately every 2 feet. Use cable ties to anchor the strip to the truss. You can also use speed nuts or cotter pins for strip anchoring to avoid drilling holes.

Solder a small section of 22-gauge four-conductor wire onto the strip’s end terminals. To reseal the LED pool light strip, slide wires through the holes of a 10-mm end cap, fill the cap with silicone, and slide it into place on the end of the strip. Be sure to cover all of the exposed conductive traces to ensure water resistance. Allow a minimum of two to three hours for the sealant to cure.

7) Once the new end wires are attached to the strip, you will mount the amplifier. Use the double-sided 3M foam pad to mount the amplifier in the middle of strip 1 and strip 3. For best results and added security, apply 3M adhesion promoter to the amplifier and its installation location on the pool wall.

8) Using a dolphin connector, join each like-colored wire on strip 1 to the same color on one end of the amplifier. Do the same when connecting strip 3 to the other side of the amplifier. You should be connecting three wires in each color (red, blue, and green) together on each side of the amplifier. The black strip wire will be joined with white amplifier wire. Note that the separate group of just black and red wires are meant to be connected to the power supply. Follow the same instructions for connecting strips 2 and 4 to the amplifier on the other side of the pool.

9) Use 18-gauge wire and dolphin connectors to connect the amplifiers to your power supply.

10) Plug the power supply’s attached cord into an outlet, and enjoy your LED pool lighting system! Refill your pool with water, but make sure to leave space between the water line and the lights.

For more LED pool lighting options, see our entire selection of waterproof color-changing LED strip lights.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

For the average homeowner, electrical panels are not very well understood. Since the job of an electrical panel is to deliver electricity, the common assumption is that if you need more electricity to support your household, you should just be able to add more circuits. This is incorrect, though.

This is only part of your electrical panel’s job. It also acts as a safety device, channeling the electrical flow into circuits so your home gets the amount of electricity that’s allowed by the panel. If your home doesn’t have enough electricity, then it’s time to upgrade your electrical panel, but how do you know when this time has come?

Have you noticed any lights in your home that flicker, dim, or brown out when you turn on major appliances such as your dishwasher or microwave? This is a sign that the draw on your system is too strong, and that you would benefit from adding more amps to your electrical box.

If you have multiple circuit breakers that trip on a regular basis, this is probably a sign that you don’t have enough power coming into your home. If you’re constantly flipping circuit breakers back on in your electrical panel, you could very well need an upgrade.

This is actually an outdated method of managing the electricity in your home. In fact, it can be downright dangerous. Many homeowner’s insurance companies won’t even insure homes that still have fuse boxes instead of an electrical panel. Fuses simply can’t provide the amount of power that the average home needs. The best thing you can do is upgrade your fuse box to a standard electrical panel as soon as possible.