Most people have experienced a circuit breaker trip at some time or the other; and the first couple of times it happens, it can be quite alarming. However, this is a very important safety component in any electrical circuit. A circuit breaker is essentially an automatic device used to stop the flow of current within a circuit, as a safety measure. It is specifically designed to protect your property, equipment in your home/commercial space and you from overloading the electrical circuit.

The sole reason a circuit breaker trips is to prevent the overheating and overloading of an electrical circuit, beyond the capacity of that circuit. If there is no breaker in place, the electrical units in that circuit can get damaged and potentially lead to a fire.

In case a circuit breaker trips, the very first thing to do is to locate it in your panel box. The switch you are looking for is the one that isn’t completely in an On/Off position. Once you turn the switch into the ‘on’ position, the power will be restored. In case the power doesn’t come on, simply switch it off and then on again.

If the circuit breaker trips even after you have reset it, don’t just try resetting it again. It’s doing what it’s designed to do and telling you that there is something wrong that has to be investigated. There are three different things that can cause a circuit breaker to trip:

This is the commonest cause of a circuit breaker trip. It occurs when the electrical energy that’s flowing through the circuit is much more than what it can handle. The simplest way to solve this problem is to redistribute the power to some other circuits. Very simply put, in case too many heavy appliances are connected to a single circuit, move a couple of them to one that isn’t as loaded.

It’s important that you check whether the circuits aren’t loose. First, switch off the power and look for any loose wires; you can do this by closely inspecting the hot wires and outlets that lead from the service panel to the circuit breaker, and then tighten the connection that’s loose.

If after checking the circuit overload, you find there aren’t any issues in that areas, the problem could be a short circuit. This is caused when any live wire touches another neutral/live wire. At times a short circuit may be caused by a broken wire within the breaker. It’s far more difficult to identify this as it could be just about any part of the wiring system which is connected to that circuit. At times, the culprit could be an appliance that’s plugged into an outlet.

This issue is quite a dangerous and severe one and it’s important that it be diagnosed quickly. It can be quite tedious to look for a short circuit and the outlets, plugs and wiring that are connected to that circuit, but these checks are important. Look for cracks or signs of burning in the insulation and call an electrician without delay.

If it’s neither a short circuit nor a circuit overload that’s caused the circuit breaker to trip, it could be a ground fault issue. This happens when any hot wire touches the metal outlet box or the ground wire.

If a circuit breaker trips in your home or commercial property, keep in mind that it’s a very serious issue and not something that should be ignored. For the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or contact us through this online form.

Thanks for reading,1300 169 263

Selecting the best electrical service professionals isn’t always an easy task. There are many available, and it can be challenging to narrow your search down to the best candidates. You might feel pressure to make a decision quickly, but doing your homework is highly recommended. Hiring the wrong electrical expert can lead to lots of frustration, as well as wasted time and money. Be sure to ask the important questions before deciding on a hire.

Even if they come with a big discount, you never want to work with electrical professionals who aren’t licensed and insured. Taking this measure will ensure your hire has proper training for the job and you won’t find yourself stuck with substandard results. Insurance is necessary as well since accidents are not always avoidable. Unforeseen damages can easily occur on the job site, and if your electrical experts aren’t insured, you could be stuck with the stress — not to mention extra costs.

It might not be enough to have a licensed and insured professional. They still might not have experience with your particular situation. Find out if they’ve dealt with jobs like yours before, and if they can offer insight that might help you finish things ahead of schedule and under budget. If they specialize in a particular area, be sure it’s related to the job you need! If it’s a big project, make sure they’ve worked on large scale contracts before adding them to your team. You don’t want your electrical professionals to get in over their heads while on the job.

It’s a bonus if the work performed is under warranty, as there is no telling what might happen down the line. If issues arise after work is complete, having electrical service professionals you can call on to address the problem is of critical importance. Beyond giving you valuable peace of mind, this can help ensure the work meets standards of safety and quality. When you consider how dangerous electrical work can be, this becomes even more important.

Electrical service professionals should be reliable enough to let you focus on other aspects of the job while they work. Seek a company that has extensive experience serving customers in your area and a proven track record for success. You can tell a lot about a company by reading online reviews and testimonials from other customers. In addition to that, any reputable electrical contractor should be open to answering any questions you may have.

Product High Lights

Features

This LED Warehouse Aisle High Bay is a true champion of placing the light exactly where it is needed. 3 different optic packages are available to allow for different mounting heights and aisle configurations. Motion Sensors can be added to either turn off or dim the light to a specific amount to save even more energy. Wireless controls based on Zigbee and DALI protocols can be added so that you can control these lights from your computer. Multiple mounting options available to meet your specific requirements. 0-10V high bay a great option for your open space areas as well. So if you have a warehouse that has a combination of open space as well as aisle racks, then one format can serve all your needs.

To view this product and see our family of High Bay LED products and systems, visit us at

In the quest to stay comfortable and combat escalating temperatures in our area, many homeowners turn to fan installation to bolster the results of traditional HVAC cooling. Our Washington, DC electricians install them all, from ceiling fans, to mechanical attic fans. When choosing for your home, do you know which fan installation is giving you the best results? You might be interested in what our Washington, DC electricians have to say on the topic!

No matter the fan type, they can assist in reducing energy costs and increasing comfort in the muggier months. They don’t actually reduce the temperature of the room, so how do they help? Well, fans assist in removing moisture from your home, keeping humidity under control somewhat. Additionally, moving air naturally feels cooler on the skin, helping to reduce body temperature; thus, you need to run your AC a bit less.

Additionally, in the case of a ceiling fan, they can provide a unique and interesting way to add some style. Another layer of design, or an additional fixture can do a lot for the beauty of your DC home.

While ceiling fans are a slightly more direct cooling method, an attic fan can do just as much for your home, if not more! An attic fan is installed in ,where else, the attic. This fixture can assist in reducing your cooling costs by up to twenty percent! How? Well…

Think of your attic like a big envelope, or bubble. It tends to hold onto its temperature, and because it is exposed radiant heat (sun) and collects remnant heat from your home (heat rises), it tends to be much much hotter than the rest of your home. If the inside of your home is seventy, your attic could be up to one hundred! This basically boils down to you having a massive natural heat source directly above your home. Not good for business when you’re trying to cool things down!

Attic fans mitigate and reduce attic temperatures, and by extension, the temperature of your home! They do this by improving ventilation, and increasing cool airflow throughout the attic. The difference can be huge!

Honestly, our Washington, DC electricians would suggest both. With a proper attic fan installation augmented by ceiling fans, you can find yourself relying on your HVAC system so much less. This is drastically less expensive, and keeps your cooling system from overworking (which makes it last longer, and need less repair) to boot!

Looking to begin relying less on your cooling system? Or maybe you just want a little more comfort for your DC home. Either way, our experts can provide the installation services you need! Contact our specialists today to learn more!

7.  Convert the extra closet into a sewing/hobby center.  Install a custom-cut countertop and a little task light… “Viola!” You are done.

8.  Or, maybe you are not done….Why not literally “Knock Her Socks Off” and build her a bigger closet?!

Whether you are building a new closet or updating an existing one, there are specific rules for lighting an enclosed closet space.  The National Fire Protection Association’s National Electrical Code (NEC) sets standards for safety:

Because closets contain flammable material with limited ventilation, strict building codes dictate that specified lighting fixtures must be installed 18” to 24” from walls depending upon which lamp source is being used.  Surface mounted and recessed fixtures must allow for 6”-12” of clearance from any storage space, such as shelving or clothing rods.

♦Of course,these standards are not a problem for Mariah Carey whose closet is as big as a bedroom!

One of the latest changes to the NEC code is the addition of LED (light-emitting diode) fixtures.  LED lighting may cost a bit more, but energy-savings, greater illumination and safety features will prove to be well worth the investment over time.  The quality and adaptability of newer LED lighting makes it an excellent choice for closets and dressing rooms.

9.  Don’t leave Mom in the dark!  Create a cozy corner with a new den floor lamp so she may relax and read, while you watch the ball game! Try a lamp with full-spectrum lighting to elevate her spirits.

10.  Reward yourself:  Clean out the garage and carve out a space for a workshop that is all your own!

People are investing more into floor covering, cabinetry and shelving to make the most of their garage space.    Fluorescent fixtures, track lighting and simple portable lamps are making their way into upgraded organized garage systems.