According to the Electrical Safety Foundation International, more than 30,000 non-fatal shock accidents happen every year. Electrical shock is relatively easy to prevent if you know what to look for and what to avoid. With some basic knowledge and safety training, you won’t become a statistic. Read some of our quick tips below to find out how you can protect yourself and others from accidentally receiving an electrical shock.

Wall plates and light switch covers are not just there to make sockets look better–they keep debris out of the sockets and shield fingers from exposed wires. Never stick your hands or a metal utensil into a wall socket; the currents from an electrical shock can cause injury or even death.

Educate yourself on how the fuses, circuit breakers, and wires are set up in your home. This simple step can prevent injury and also allow you to know the limits on where you can plug in powerful tools and appliances. In addition, it can be helpful to match light bulbs’ wattage to your lamps. You can usually see the recommended maximum wattage printed around the light bulb socket. It’s wise to use light bulbs with equal or lesser wattage so you don’t overload the lamp wiring. It’s also good to know if your house is wired with aluminum or copper wiring, because these metals handle heat differently.

Any electrical equipment that sparks, gives out small shocks, frequently short circuits, or has frayed wires is not safe to use and may need to be fixed or replaced. If any wires are sticking out from the wall, don’t tamper with them. Have an electrician inspect the wires first, especially if they appear damaged.

When storing cords, don’t let them twist or get into haphazard knots or else they may tear. Tuck them away somewhere that small children can’t find them and pets can’t chew on them. Many hardware stores sell cord organizers to make this easy for you.

Try to avoid having too many heavy appliances plugged in and running from the same outlets or power strips. This can lead to overheating, a blown fuse, or an electrical fire. Use extension cords sparingly and try to limit their use to temporary arrangements when doing work around the house. If you’re constantly in need of extension cords, you might be better off just having another outlet installed.

Never leave electrical appliances somewhere they can easily fall into sinks or bathtubs. If an appliance accidentally falls into the water while plugged in, turn off the power to that circuit before you remove the object from the water. Then let the appliance fully dry and ask an electrician if it’s still acceptable to use. Store outdoor electrical appliances in a dry place where they are safe from rain, hoses, or swimming pools.

If you are working with electricity around the house, turn off all appropriate power sources and wear protective gloves and/or boots. Remove any metal jewelry and don’t wear clothing that could get caught on a wire. If you’re the one doing the work, do not assume that someone else has turned off the power sources. Always double check for yourself for your own safety.

Don’t hesitate to call a professional with questions if an electrical job is intricate or beyond your scope. A tiny mistake can lead to serious consequences, so hire a licensed electrician for any complicated or dangerous jobs.

As we've discussed in the past on this blog, spring is National Electrical Safety Month, and now is the perfect time to brush up on the best practices and preventative measures that homeowners should take to avoid an electrical disaster. Some of these tips and tricks are generally common sense - like keeping water away from any open current, or replacing a frayed wire to avoid any sparks or arcing - while others may not be so obvious.

For example, you may not realize it, but there could be underground wires surrounding your house that could easily be compromised when you are gardening. If you have a light post in your front yard, there is likely a wire that connects it to your home's main electrical hook up, or if you have a detached garage with power in your back yard, that connection too probably runs beneath your lawn. Even some pool owners power their filters through underground wiring set ups.

Whether you are simply laying down new sod or intend to plant some shrubbery along your driveway, before taking a shovel to dirt, you want to be sure you aren't severing a wire that could make you vulnerable to potential electrocution.

In the quest to stay comfortable and combat escalating temperatures in our area, many homeowners turn to fan installation to bolster the results of traditional HVAC cooling. Our Washington, DC electricians install them all, from ceiling fans, to mechanical attic fans. When choosing for your home, do you know which fan installation is giving you the best results? You might be interested in what our Washington, DC electricians have to say on the topic!

No matter the fan type, they can assist in reducing energy costs and increasing comfort in the muggier months. They don’t actually reduce the temperature of the room, so how do they help? Well, fans assist in removing moisture from your home, keeping humidity under control somewhat. Additionally, moving air naturally feels cooler on the skin, helping to reduce body temperature; thus, you need to run your AC a bit less.

Additionally, in the case of a ceiling fan, they can provide a unique and interesting way to add some style. Another layer of design, or an additional fixture can do a lot for the beauty of your DC home.

While ceiling fans are a slightly more direct cooling method, an attic fan can do just as much for your home, if not more! An attic fan is installed in ,where else, the attic. This fixture can assist in reducing your cooling costs by up to twenty percent! How? Well…

Think of your attic like a big envelope, or bubble. It tends to hold onto its temperature, and because it is exposed radiant heat (sun) and collects remnant heat from your home (heat rises), it tends to be much much hotter than the rest of your home. If the inside of your home is seventy, your attic could be up to one hundred! This basically boils down to you having a massive natural heat source directly above your home. Not good for business when you’re trying to cool things down!

Attic fans mitigate and reduce attic temperatures, and by extension, the temperature of your home! They do this by improving ventilation, and increasing cool airflow throughout the attic. The difference can be huge!

Honestly, our Washington, DC electricians would suggest both. With a proper attic fan installation augmented by ceiling fans, you can find yourself relying on your HVAC system so much less. This is drastically less expensive, and keeps your cooling system from overworking (which makes it last longer, and need less repair) to boot!

Looking to begin relying less on your cooling system? Or maybe you just want a little more comfort for your DC home. Either way, our experts can provide the installation services you need! Contact our specialists today to learn more!

Rewiring a home is no easy task, and not one that you would probably willingly take on yourself—nor should you. However, sometimes whole-house rewiring is necessary in order to improve daily electrical use and to increase home safety. This type of job requires a team of expert electricians who are licensed and trained in this type of electrical service.

The demand for electricity in our homes has dramatically increased since the 1980s, and seems to only be rising. In addition to more powerful appliances, there are constant technological advances and new devices out on the market, all requiring electricity to run.

Even if your home is only a couple decades old, it could very well need a wiring upgrade, as this heightened demand for power can easily overwhelm an older wiring system. Additionally, if your home is over 5 decades old and still has its original copper wiring, you and your family could be in danger of fire risks and power surges.

Below are a few signs that indicate you could be in need of whole-house rewiring:

You have aluminum wiring: In the mid-60s through the mid-70s, aluminum wiring replaced copper wiring. However, aluminum wiring can overheat and cause fires, according to the Consumer Product Safety Commission. If you’ve confirmed that you home was built during this time, you’ll want to consult with a professional electrician.

Your circuit breakers are constantly tripping: Have you found yourself habitually going to the circuit breaker panel to reset tripped breakers? If this is the case, it could be a sign from your home that its electrical system can’t handle the current demands being placed on it.

You’ve noticed charred, discolored outlets: Marks such as these are indicative of electrical fires caused by shorts within the outlet. At the very least, the outlet will need an upgrade, but it’s best to replace all the wiring.

There is an acrid smell in the air: Have you noticed a burning smell when you turn on the lights in your home, with no clear source? Then it’s time to call an electrician, because something could be wrong with your home’s wiring and it will need replacement.

Imagine how relaxing it would be to soak away the day’s stresses or invite friends over for a fun party featuring your own hot tub. Having a hot tub or sauna in your backyard or patio area is a dream of many. These provide a lot of fun as well as stress relief and are more affordable than you may think. However, the idea of installing a hot tub is something you may not be ready to tackle yourself. Even if you are looking to save money, you may find that calling a Burbank electrical service, such as The Electric Connection, is actually the best option. Consider the following before you think about installing a hot tub yourself.

Safety

Even if you are a skilled at home improvement projects, installing a hot tub can be a dangerous activity. This is because installing a hot tub combines water and electricity. You do not want to take the risk of injury to yourself or others by making a mistake in the installation. A licensed electrician in Burbank has the background to make certain he or she is not injured and the electrician should have insurance in case there is an issue.

Equipment Care

In addition to your personal safety, you should also keep in mind properly caring for the equipment during the installation process. In many cases, you will void the warranty on a hot tub or sauna if you do not install it properly. So for this reason, search the internet for electrician Burbank and allow a professional to take care of this job for you.

If you are considering the installation of a hot tub, sauna or backyard water feature, find a Burbank electrician by visiting The Electric Connection’s website at ElectricConnection.com  or calling us and talking to a customer service specialist today.