How many light bulbs have you changed in your lifetime? It’s a simple action, and often one that we don’t put much thought into, but what if the simple act of changing a light bulb could make a profound impact on the environment, and the well-being of future generations?  As experienced Plano Electricians, we at ElectricMan Inc. have made it our mission to help bring knowledge of Alternative Lighting Solutions, electrical efficiency, and environmental responsibility to the forefront of everyone’s minds. The reality is that even small changes can yield huge benefits when it comes to energy savings. According to www.EnergyStar.gov:

“If every American home replaced just one light bulb with a light bulb that’s earned the ENERGY STAR, we would save enough energy to light 3 million homes for a year, save about $600 million in annual energy costs, and prevent 9 billion pounds of greenhouse gas emissions per year, equivalent to those from about 800,000 cars.”

Think about the changes that you can make by simply replacing the outdated incandescent bulbs in your home as they burn out with one of the Alternative Lighting Solutions below. Here are some details on a couple of the most popular Alternative Lighting Solutions available.

Compact Fluorescent Lamp: Modern CFL bulbs for use in homes consist of a curved fluorescent tube and electronic ballast in a single unit, designed as a direct replacement for standard blubs. They use 3-4 times less power than comparable incandescent bulbs. These are great options to replace your standard light bulbs, but they do have a few small drawbacks. According to an article by PopularMechanics.com, while CFL’s do have a much longer lifespan than standard bulbs, they often lose some of their brightness long before their expected lifespan is up, and this is increased in fixtures that don’t allow for efficient cooling of the ballast located in the base of the bulb. Another documented fact about CFL bulbs is that they do contain mercury, which means that they must be disposed of properly by taking them your local approved recycling center. You wouldn’t throw a battery out with the daily trash would you? So you shouldn’t throw these out either.

Light Emitting Diodes: LED’s are a form of “solid state” lighting that have become available recently to homeowners as an incandescent and CFL replacement. Using small light emitting diodes mounted directly to circuit boards, these are highly efficient, and have fewer parts prone to failure, allowing for an expected realistic lifespan of 20,000 to 30,000 hours, when operated at recommended temperatures. While initial costs for these bulbs are higher than incandescent and CFL options, long term energy savings are where this alternative lighting option truly shines, with the average LED bulb using approximately 12-17% of the energy that it takes to run an incandescent bulb of similar output, the end result is a bulb that costs drastically less to power over time.

As a point of comparison, here is a simple chart of the energy usage of LED and CFL bulbs compared to incandescent bulbs, and the output associated with them:

Lighting technology has changed a lot in the past decade, and it is pretty amazing to see what could be on the horizon for future lighting innovations. Take this for example. While most homes will never need this amount of output, it’s pretty impressive to see that something the size of a Christmas tree light, like this plasma bulb, can put out more light, more efficiently, than the giant bulbs that we use in street lamps!

The great thing about these changes is that they aren’t something that requires a huge change in your lifestyle, so they are some of the easiest ways possible to help the environment, and lower electric bills while you are at it!

There is nothing more frustrating then flipping on the light to your room or the kitchen and it won’t come on. Maybe it flickers and pops before going out completely. It not only leaves you in the dark, but it makes you more than a little worried about the safety of your home. Electricity is no joke and you never know what is going on in the ceiling or behind the sheetrock where all of those electrical wires are sitting. It is a scary situation and deserves immediate attention from an electrician. Burbank homeowners who have a light fixture that is giving them fits can call The Electric Connection to get it looked at right away.

A faulty wire or a wire that has shorted out could be causing the problem. The light fixture may be fine, but it isn’t getting the electricity it needs to function. That means those wires that were once feeding electricity to the fixture are sitting behind the light, touching insulation. This is a recipe for disaster and can lead to an electrical fire. The situation must be attended to by an electrician in Burbank as quickly as possible. It is a good idea to flip the breaker that feeds the light to cut off the electricity while you wait for help to arrive.

Some fixtures are truly outdated and the wiring inside the fixture itself may be bad. This is difficult to tell just by looking. Your Burbank electrician will need to perform some quick tests to track down where the problem lies. Once the problem has been identified, you will be given your list of options to take care of it. In many cases, the fixture needs replaced or the wiring to the fixture needs to be fixed. Don’t put off calling an electrician if you have a fixture that is flickering or not working. Give The Electric Connection a call today.

We are superbrightleds.com, an online e-commerce website engaged in global distribution of a diverse selection of high quality LED lighting products. Product sourcing from many overseas suppliers, mainly in China and Taiwan, is accomplished mainly through email and phone communications. We are seeking an experienced product sourcing professional to help develop, improve, and expand our LED product lines. This is a full-time position.

Responsibilities include:

Sourcing

Supplier Relationships

Qualifications

Benefits

If you live in the United States, you’re likely well-familiar with our typical wall-socket setup. Your plug has two flat pieces of metal roughly half of an inch wide, with one side sometimes being slightly wider than the other. Your wall socket has two slots that match this, with one side also being slightly larger than the other. However, sometimes there’s a variance: some plugs have a third prong below and between the normal two, and most electrical sockets also have a third hole to match this plug. What’s the difference between these two types of plugs and is one better than the other?

To put it simply, yes, one is better than the other. When it comes to electrical plugs, the old adage “less is more” does not apply—the three-prong plug is far better than a two-prong. To learn why, let’s discuss the difference between the two.

In order for electricity to flow, you must complete a circuit. A circuit essentially is a connection from your power source to the device, and then from the device back to the power source. The line that brings power from the power source to the device is called your “hot wire”, which is most often red and comes off the positive terminal (noted by the large “+” sign). The line that then returns from the device to the terminal, usually a black wire connected to a “-“ sign, is known as the “neutral wire.” A plug must have both of these lines in order to work.

However, the third prong in a three-prong plug is a “ground” plug, which dramatically improves safety. When an unexpected burst of electricity happens, such a short in the device or a surge from your power supply, the ground plug will take that abundance of additional electricity and move it away from the device and down into the ground where it is safe. This prevents your device from being overloaded which can cause overheating, sparking, and fires in addition to ruining it.

Three-prong plugs didn’t become the standard in homes in North America until the late 1960s. If you have a home that was constructed around this time or after, odds are your wall sockets are probably already of the three-prong variety. Two-prong plugs can work with three-prong sockets just fine, and you’ll rarely experience any issues.

However, if you have any old two-prong plugs, you’ll likely need your electrical system updated in order to upgrade to a three-prong setup. Properly installing ground wires can involve several hours of electrical work and even cutting into your walls in order to do so properly, so it’s a rather large undertaking. However, it’s by far the safest and most prudent option.

Another option that doesn’t involve tearing open your walls is to install a ground fault circuit interrupter outlet, otherwise known as a GFCI. These sockets are two-pronged, but feature a miniature circuit breaker that measures the resistance through a plug and mechanically shuts off when the risk of a shock is present. While this can help you avoid being shocked by a faulty device, there is still no ground wire present so your electronics are not protected from a power surge.