The home electrical system consists of various components that enable the safe delivery of energy to different sections and appliances in the household. Even though the system may appear complex, it is important for the homeowner to understand a few basics.

This would help you when things do not work or there is an emergency that requires turning off circuits or the entire installation. In addition, an understanding of the home electrical system will help the owner respond to questions from prospective buyers.

All the electrical circuits in the house originate from the main breaker panel. The panel is usually inside the house and near to the power entry point. However, the panel can also be far, and especially when in a multi-family structure.

The rating of the panel determines the number of circuits and power that the home electrical system can support. Some older homes have been using the 100 Amp service, smaller installations use a 60 Amp service while newer and larger houses are built with 200 amps to accommodate the increased number of electrical and electronic equipment commonly used in a modern household.

Different loads require the correct size of cables and breakers that can handle the current without heating up. For example, an air conditioner requires a 30 amp circuit while a kitchen may use two 20 amp circuits.

If there is a fault, such as a short circuit or overload, the breaker trips and cuts off the power to the affected circuit, hence preventing further damage that could lead to fire. Before resetting the breaker, you should first ask an electrician to check and rectify the problem.

A home electrical system consists of different individual circuits originating from the main breaker panel. The wires from the panel run to the rooms to supply the outlets, lights, and hand wired appliances. In most cases, several rooms may share the same circuits such that all the lights in the house are on one breaker, outlets on another breaker, etc.

Some dedicated circuits from the main breaker may go directly to the hard-wired appliances and nowhere else. Equipment such as the electric water heaters, furnaces, and air conditioners are usually installed on their own. Other hard-wired devices include the smoke alarms, which may also have battery backups so they will work even when there is a power outage or a fire interrupts the home electrical system.

Grounding is an essential protective feature that must be installed in all home electrical systems. It provides a path for the electrical current arising from faults that make the exposed metallic parts to become live and dangerous.

The ground connects all the exposed metallic parts to the earth mass through a third wire in the power cord to the equipment. This provides a low electrical resistance path for the current, hence, making the parts safe to the touch even in the event of a malfunction.

maintenance and repairs.

This is the time of year when home fires seem to be prevalent. The addition of heaters, burning in fireplaces or woodstoves and the additional holiday decorations can increase the risk of a fire in the home. It makes more sense than ever to give your home a little bump in the safety department by adding another layer of protection in case of a fire. A hard-wired smoke detector is an excellent option for those who are worried their battery-operated smoke detector won’t be working at a time that is most important. An electrician in Los Angeles, like those at The Electric Connection, can help you sleep a little better at night knowing your home has several functional smoke detectors.

Hard-wired smoke detectors respond the same as a typical detector, but instead of relying solely on batteries, they are wired directly into your home’s power. Another real benefit to the hard-wired detectors explains a Los Angeles electrician is the fact they are all connected. When one alerts they all alert. This means that no matter where the smoke is first detected in the house, the entire household and even in the garage will be alert to the potential fire. This can add minutes to your escape time or give you time to catch a small, manageable fire before it engulfs the entire home.

If you have a home security system, this is typically the type of smoke detector that is used. There are apps that allow you to connect the smoke detector to your smartphone to alert you something is wrong. All of these are things you can discuss with your electrician. Los Angeles homeowners who want to do a little more to ensure the safety of their home and the occupants can give The Electric Connection a call today and schedule a fire detector installation.

Jewelry doesn’t sparkle and shine on its own – the reason a gem looks radiant is because of the way it reflects light! That being said, lighting is integral to retail design in a jewelry store. You want your displays to entice customers and show off your products in all their brilliance! Hopefully, we can help. This post will lay out options for various jewelry lighting displays.

puck lights to call attention to individual pieces, as seen in the photo to the right. Puck lighting above jewelry creates beautiful silhouettes and puts a spotlight on each piece.

If you love the look of evenly illuminated in-wall shelving displays, there is a way to avoid the spotlight effect. For a more subtle glow, install light fixtures on the inside edges of your shelves. See Xenon Low Voltage Light Strip or any of our

You’re showing off your most valuable items in the counter-style showcase, so it’s important to get the lighting right. However, make sure the actual light fixtures do not become focal points.

With a glass showcase, you need to integrate the lighting so that your display will shine, and so that it’s not blocked in any way by wires or lamp heads. The best way to do this is to install thin lighting strips inside the showcase, just below where the edge of the counter is. You can see an example in the photo to the right.

Our Your window display can be the number one determinant of store traffic. Like the counter showcase, it’s ideal if the light fixtures aren’t visible at all here so that your most alluring items take center stage.

You will likely have wall space to work with on all four sides of the window display, so it wouldn’t be too difficult to align microfluorescent fixtures against the edges for even illumination.

Depending on what types of items you are featuring, you might want to incorporate some spot lighting as well. You could use an adjustable adjustable recessed lights in the ceiling above the window display.

Selecting the best electrical service professionals isn’t always an easy task. There are many available, and it can be challenging to narrow your search down to the best candidates. You might feel pressure to make a decision quickly, but doing your homework is highly recommended. Hiring the wrong electrical expert can lead to lots of frustration, as well as wasted time and money. Be sure to ask the important questions before deciding on a hire.

Even if they come with a big discount, you never want to work with electrical professionals who aren’t licensed and insured. Taking this measure will ensure your hire has proper training for the job and you won’t find yourself stuck with substandard results. Insurance is necessary as well since accidents are not always avoidable. Unforeseen damages can easily occur on the job site, and if your electrical experts aren’t insured, you could be stuck with the stress — not to mention extra costs.

It might not be enough to have a licensed and insured professional. They still might not have experience with your particular situation. Find out if they’ve dealt with jobs like yours before, and if they can offer insight that might help you finish things ahead of schedule and under budget. If they specialize in a particular area, be sure it’s related to the job you need! If it’s a big project, make sure they’ve worked on large scale contracts before adding them to your team. You don’t want your electrical professionals to get in over their heads while on the job.

It’s a bonus if the work performed is under warranty, as there is no telling what might happen down the line. If issues arise after work is complete, having electrical service professionals you can call on to address the problem is of critical importance. Beyond giving you valuable peace of mind, this can help ensure the work meets standards of safety and quality. When you consider how dangerous electrical work can be, this becomes even more important.

Electrical service professionals should be reliable enough to let you focus on other aspects of the job while they work. Seek a company that has extensive experience serving customers in your area and a proven track record for success. You can tell a lot about a company by reading online reviews and testimonials from other customers. In addition to that, any reputable electrical contractor should be open to answering any questions you may have.

relatively high ceilings. Drive by any industrial park, warehouse, or factory, and walk inside and what you will see is a high bay light.

But walk into any factory or warehouse and you will see different styles and options, wattage’s and configurations. Traditional high bay fixtures that were once common place were Mercury Vapor, which were then replaced with High Pressure Sodium and Metal Halide bulbs. As new technologies were introduced, and old technologies became more common, the old HID bulbs were replaced with Induction and Fluorescent light sources. And more recently with the more wide spread approval and popularity of LED, we started to see conversions from these older technologies to the latest energy saving LED High Bays.

A High Bay Fixture, depending on the light source, can take on many forms and shapes. If you consider a Metal Halide or High Pressure Sodium fixture, they typically consist of a large heat sink block at the top of the fixture that typically houses the fixtures ballast. Below is an aluminum or acrylic dome and at the top of the dome is the HID bulb. These bulbs typically come in two wattage’s, 400 and 1000. 400 Watt Fixtures tend to be installed in ceiling heights no higher than 30 feet, 1000 watt fixtures are typically 40 feet or higher. Interestingly enough, spacing of lights is similar to the height they are located off the floor. A fixture installed at 20 feet from the floor is installed in a 20X20 pattern, 30 feet in a 30X30 pattern, 40 feet in a 40X40 pattern. Of the 3 type of HID bulbs, Metal Halide tends to be the best option. High Pressure Sodium Bulbs are very low on the temperature color and have the warehouse aisles have the ability to focus the light where it is needed. A light designed for a warehouse aisle is a lot different than a light designed for a gymnasium or a factory floor. In these spaces, a light that can flood the area evenly is important, in a warehouse aisle, a light that can light up the face of the shelves and the floor below is important. And when selecting energy efficient options, its just as important to understand the technology and what it is capable of doing. Adding controls to a T5 fluorescent fixture is a good idea only if the ballast is designed to handle that requirement and not lower the life expectancy of the bulbs. Motions sensors and daylight controls that dim the light output based on occupants and the amount of daylight available in the space. Technologies such as metal halide and high pressure sodium are not a good choice as these technologies are not good at dimming or turn on or off quickly. Fluorescent can dim, but you need special ballasts for them. So knowing what you want to do and may want to do is important at time of purchase, because not having the proper equipment or options could mean a costly lighting warehouses, factories, gyms and readily available through the utility companies, and mass adoption means the technology of LED had matured to the point where the questions and disbelief of past years have gone away.