Did you know that your outdoor lighting installation needs maintenance every once in a while? It’s true! To keep your outdoor lights shining bright, there are a few things you should master.

Whether you’ve already got a bunch of outdoor lighting or if you’re a first-timer, there is plenty to learn in this checklist. And it’s really quick and easy, too!

Check Exterior Bulbs

The biggest headache for a homeowner is a bunch of burnt out bulbs. If you’re not prepared, it can really eat up time to get the right bulbs. But the solution here is to be prepared! When you first get your outdoor lighting installation, be sure to write down the bulb type for the fixture, and go grab some spares for later use.

After that, it’s all about anticipating need. But how can you tell if a bulb is about to blow out? There are some easy tells! Your bulb is close to bringing out if:

Keeping an eye out for these issues can be a huge time saver, and ensures your bulbs burn beautifully all year long. Just do a quick walk around once a week to check for these common signs!

Check Your Outdoor Lighting Wiring

During your light bulb check, do a quick look over for your wiring. If there are cuts, cracks, or missing bits of wiring, get them replaced with the help of a professional! Faulty wiring can be pretty dangerous when left alone, particularly if it gets damp or if the wiring is coming into contact with flammable materials. Damage is easy to spot, so as long as you’re looking for it, you’re gonna find it.

And that’s pretty much it! Any other issues should be handled by a professional for safety reasons, but these two things are the most common causes for exterior lighting failure. Feeling more confident about an outdoor lighting installation now? Contact the certified electricians at Kolb Electric to learn more about how outdoor lighting can benefit your home!

In this series, we’re helping you save energy at your homes and businesses, room by room.

We’re pulling out all the stops to give you the best tips to use in the bedroom – for energy-efficient lighting, that is!

1. Take a survey of all your light fixtures – table lamps, floor lamps, track lights, and any ceiling fans, chandeliers, or pendant lights. How many of these use incandescent light bulbs? If the answer is greater than zero, we’ve identified the first way you can cut down your energy consumption in the bedroom: Swap out all your incandescent household, chandelier, and reflector light bulbs for

Using only 0.3 watts of power, it won’t cost you more than $0.20 to operate each year. That’s 90% less than the traditional incandescent. Not to mention it has a 100,000-hour rated life!

4. What other light fixtures do you use? Wall-mounted reading lights? Shelf lights? Display lights? You can save even more energy by upgrading these fixtures to LED or fluorescent.

LED Tubes and LED Panels become the best solution for the office workplace environment. They are cost effective lighting solutions, provide good lighting quality, last longer and contain or emit no harmful compounds while leaving an ecological footprint in each building. This article is going to explain the difference between tube fixtures and panel fixtures. They are both different, but often times get mixed up when talked about. Let’s clarify any confusions you may have about the two fixtures…

LED Panels are installed in dropped paneled ceilings. perfect replacement for expensive shatterproof fluorescent lamps. MyLEDLightingGuide LED tubes do not contain glass and will not shatter if dropped. Fluorescent tubes contain mercury, some projects decide for LED versions because they want to remove mercury out of the building.

All LED tubes use drivers that power the LEDs. The ballast is converting the AC power from the utility company into LED’s DC power. Some manufacturers incorporate the drivers in the LED tubes. Some decide to use an external driver outside of the tube. There are some subtle differences between the two designs. Retrofitting to LED tubes with internal drivers involves removing the ballast and rewiring the line source. Retrofitting external driver tubes involves removing the ballast, the line source gets wired to the external LED driver that is connected to the tubes. More and more people ask for LED tubes that can be just installed as a plug and play version into existing fixtures without removing or rewiring the existing ballast. While the installation of these tubes is simple, they are compatible with most ballast, but not all ballasts. Contact the lighting experts at MyLEDLightingGuide.com to ensure the tubes will run properly.

Changing the light at work and in offices is easily done by LED tubes. They are readily set up and use considerably less power. LED tube light sources offer smooth, stable and clear lighting conditions.

A functional, up to date electrical panel in your Tampa home is one of the most important aspects of strong electrical access. You could call the electrical panel (also known as the breaker panel, electrical access box, etc.) the heart of your home’s electricity. Or the brain. Neither is far off. And when a new one is installed or you get a heavy-up, there are some very specific requirements that will come into play.