Many older homes have old wiring systems and obsolete switchboards and fuse boxes. These have very poor functioning and are unable to provide proper supply to the type of devices that are used in the home today. Over the last few decades there has been significant advancement in circuit breaker technology and many people are now proactively getting these old ceramic fuse boxes replaced with current-day circuit breakers.

However, as mentioned earlier, there are some older homes that still have these re-wireable fuses. This is largely because people aren’t aware of the dangers these fuse installations pose. Those who have heard it’s important to upgrade to circuit breakers feel that it’s just something people do because their electrical contractors tell them they should.

The rationalisation they have for it is that when they haven’t faced any issues with it for so many decades, there must be nothing wrong with it. They feel it’s just a way in which electrical companies make some money by telling their clients this and getting them to upgrade to newer systems. They couldn’t be further from the truth. Here is a list of all the dangers associated with re-wireable fuses:

Most people, electricians or otherwise, tend to use regular copper wires to replace the melted fuse wire. They aren’t really aware that a fuse wire is different from a common copper wire and that the latter isn’t designed to take the load of the circuit. In many ways, this inappropriate replacement in itself is a problem. And when the fuse blows again, they simply take another wire and replace the older one.

What they fail to realise is that fuse wires generally have very low melting points. Contrastingly, normal copper wires have a very high melting point. In addition, it’s not possible to standardise the current carrying capacity of these wires as that depends on how they have been positioned inside the base and the fuse carrier.

As you can see, re-wireable fuses are a distinct danger and this is something that shouldn’t be taken lightly. It’s best not to wait till a catastrophe occurs. Simply call Allround Electrical for an evaluation of the electrical installations and the old fuse box in your home. We will provide objective advice and a reasonable quote for replacing the re-wireable fuses in your home. The number to call is 1300 169 263. You can also drop us a line via email or use this online contact form.

Thanks for reading,1300 169 263

A master electrician is the highest level certification an electrician can have. In order to earn this designation, an electrician must not only be licensed by their state or the District of Columbia, but also complete extensive training and testing as well as meet experience and on-the-job requirements.

When you hire a master electrician for your project in Maryland, Virginia, or Washington, DC, you can be assured that you’re getting the best of the best!

It takes time, experience, education, and commitment to become a master electrician. While the exact requirements vary slightly between Maryland, Virginia, and Washington, DC, all master electricians must typically:

When you hire a master electrician, you know that you’re getting service from a contractor that’s experienced, knowledgeable, and fully trained and licensed. Getting and keeping this designation shows this person’s commitment to his or her trade and to doing the best possible job. A master electrician has experience in a wide variety of projects and is able to supervise a team of journeyman electricians, so you can be assured that, even on a large, complex project, you’re getting the best and safest electrical work possible.

To hire a master electrician to work on your Maryland, DC, or Northern Virginia home, we invite you to call Kolb Electric at 877 287-1179. We’ve been helping local homeowners like you with their electric needs since 1925. We offer same-day service, seven days a week and have master electricians on staff to guarantee you the best possible service.

Wouldn’t it be nice to really step up your game this holiday season? This is the time of year when friends and family are sure to visit your home. Maybe it will be for an evening of fun and entertainment or maybe it will be for a lovely dinner. No matter what your plans are for the holidays, wouldn’t it be nice to have a little something extra to help set the scene in your home? A new chandelier is the perfect, functional idea. An electrician in Burbank, like those at The Electric Connection can get your new chandelier installed just in time for holiday entertaining.

Gathering in the sitting room for cocktails, games or good conversation is a great way to reconnect with old friends and family you haven’t been able to spend quite as much time as you would like with. Having the right lighting can help set the mood. Bright and festive or dim and intimate can all be achieved with a new chandelier complete with a dimmer switch installed by an electrician. Burbank homeowners who want to be able to set the mood with the flick of the switch will love the beauty and flexibility a new chandelier gives them.

Many of the new chandeliers available on the market today are equipped to use energy-saving lightbulbs, which can ultimately save you money in the long run. LEDs are the perfect way to brighten up a room by using just a few bulbs. The look and feel of a room can be completely transformed with the installation of a new chandelier by a Burbank electrician. Chandeliers offer unique lighting options for a foyer, dining room or a den. Have fun and shop around for the perfect fixture. Give The Electric Connection a call today and get your appointment scheduled before your next big gathering.

LED light bulbs and fixtures are the best alternatives for many reasons.

LED lights are available in several shades of white. These shades are referred to as a bulb’s correlated color temperature (National Institute of General Medical Sciences, states that, “Circadian rhythms are physical, mental and behavioral changes that follow a roughly 24-hour cycle, responding primarily to light and darkness in an organism’s environment.”

According to writes, “Several studies have documented the importance of light in reducing depression, decreasing fatigue, improving alertness, modulating circadian rhythms, and treating conditions such as hyperbilirubinemia among infants. Further, the presence of windows in the workplace and access to daylight have been linked with increased satisfaction with the work environment.” Windows are the best method of accessing daylight, but cool white LED lights along with the right color temperatures at the right times, can have the same effect on the body.

Warmer color temperatures lead to the release of melatonin, which causes drowsiness. This is appropriate during bedtime hours, but causes problems for those who need to stay awake, such as overnight nurses and doctors. Introducing natural or cool white light to hallways, operating rooms, and nurse stations can help hospital staff, especially overnight workers, feel more alert and energetic.

EPA has a list of cleanup procedures, such as having everyone leave the room, opening a doors or windows, shutting off heat and air-conditioning systems, and other specific instructions.

Fluorescent and incandescent bulbs also emit low doses of UV radiation that can damage not only facility materials but can also damage skin and eyes. According to a CBSLA.com discusses the results of another study that had similar findings. In this article, it is said that, “. . . exposure to the (fluorescent) bulbs could lead to premature aging and cancer.”

Continued UV exposure is also harmful to the eyes. A LED lights won’t flicker or emit any color spikes. Color fluctuations and flicker can cause negative effects, such as headaches and dizziness. When used for hospital lighting, LED bulbs and fixtures can improve overall health and eliminate the possibility of additional health risks posed by fluorescent and incandescent bulbs.

Seeing colors as they truly are is critical in health care environments. Inaccurate color rendering of skin or blood could lead to a misdiagnosis or failure to see signs of infection or jaundice. The spectral graph below can be helpful in understanding the advantage of high-CRI light sources. Lights with a low CRI will show fewer colors while high-CRI lights cover more of the spectrum. A light source’s ability to show more colors increases its accuracy in revealing the true colors of people, objects, and surroundings.

FreemanWhite, a health-care-focused design firm reports, “. . .light fixtures with a high CRI . . .  help caregivers assess rashes, lesions, and skin pigmentation.” They go on to say, “In the interest of avoiding liability claims, better lighting quality can enhance a caregiver’s ability to diagnose correctly, identify reactions, prevent secondary infections, and minimize readmissions.” High-CRI LED lights can also help prevent medication errors.

Another method of LED hospital lighting control is the use of occupancy sensors. These sensors will save money beyond those that result from reduced energy consumption. Sensors will also extend the life span of bulbs and fixtures even further by turning them off when no one is in the area. These sensors are best suited for low-traffic areas.

Scams are nothing new in the Tampa area. For years and years, unscrupulous folks have been trying to cheat homeowners out of their money. And in the dead of summer, scamming is at its worst! All kinds of unsavory folks come out of the woodwork, offering false claims about electrical, lighting, and other contract work that they have no intention of actually doing.