A lot of serious contractor related problems can be averted by doing just a little research. After nineteen years in the trade, I have found that if both home and business owners follow these tips, they almost always have a pleasant experience:

1. Check the license. Never hire an unlicensed contractor or electrician in any capacity. It may look like a good deal, but it may end up costing you more than extra money in the end. Unlicensed contractors are not bonded and have not taken any kind of exam to be assured they have the knowledge to perform the type of work you may need done. Also, it is very unlikely they have liability insurance (more on that below).

2. Check for insurance coverage. By law, Hawaii licensed electrical contractors will have liability insurance coverage. The bond that is required for electrical contractors in Hawaii is generally $7000 – an extremely limited amount. Look for an insurance policy of at least $1 Million.

3. Ask for a Journeyman card for proof of license. All electricians are required by law to be a journeyman, having passed all Hawaii State requirements. Ask to see the card of anyone performing electrical work on your home or business. This is very important and makes sure you have qualified workers.  Your persons and property are at risk if they are unlicensed.

4. Ask what kind of work the electrician has done in the past. It is usually a pretty good indication of what you should expect in the future.

5. What is the electrician’s real concern as you speak with them about your project? Are they concerned about what you are trying to accomplish on your project? Are they up front and confident about pricing? Do they care about your needs and the needs of your property?

Following these tips will give you the ability to find the right electrician for you. Blue Sky Electric is happy to provide you with more information. Give us a call with any questions and we will be happy to assist you.

A significant number of homes in Baltimore and Bethesda, MD, Alexandria, VA, and Washington, DC built between the mid-1960s and the first half of the 1970s have hazardous aluminum wiring rather than copper. During that time, aluminum wiring was considered safe to use and viewed as a cost-saving measure. The U.S. Consumer Product Safety Commission (CPSC) now believes aluminum wiring poses a safety hazard in homes that still have this type of wiring.

The biggest danger associated with aluminum wiring is that unanticipated fire hazards arise from the oxidation and deterioration caused at the points where aluminum wiring is connected at outlets, light fixtures, and splices. While this can cause overheating and arching that won’t trip a circuit breaker, it can cause a fire. Aluminum wiring was used in an estimated 2 million homes between 1965 and 1973—and many of these homes are located in the MD, VA, and DC area.

If you’re concerned about dangerous aluminum wiring, pay attention to the following warning signs:

All of these signs indicate a potential fire hazard for standard aluminum wiring.

Aluminum wiring should be thoroughly evaluated by a qualified electrician who is experienced in inspecting and correcting wiring problems. The CPSC recommends a few methods for correction. The first is to rewire the home with copper wire, an expensive option that really only makes sense if the homeowner is already in the process of completely remodeling or doing deep renovations. The second option is to use the Copalum crimp method to correct the problem. This involves attaching a piece of copper wire to the existing aluminum wire with a specially designed metal sleeve and powered crimping tool. It is a permanent repair option that will eliminate the dangers posed by aluminum wiring. A third option is to use a UL listed copper to aluminum connector to attach a copper wire to the existing aluminum wire.

Only an experienced electrician can accurately determine the level of danger a home with aluminum wiring faces, and then fix the problem in an efficient, timely manner.

If your home has aluminum wiring, we recommend that you call Kolb Electric or contact us online. We will send one of our expert electricians out to evaluate the aluminum wiring in your home to determine the best option to make your home as safe as possible. We’ve been serving Baltimore and Bethesda, MD as well as Alexandria, VA and Washington, DC since 1925. You can count on our experienced electricians to get the job done right the first time.

We often forget how important it can be to call an electrician if a problem arises with a home’s electrical system. In fact, most homeowners are complacent that their wiring system is just fine and needs no care or maintenance. More often than not, the only time a licensed electrician is called to a house when something is going wrong. It’s important to understand how to recognize when you may need to be preemptive about electrical problems and subtle signs that your electrical system needs maintenance or repairs. Keep an eye out for the following issues that could arise, indicating a bigger electrical problem in your home.

If you’re a fan of power strips, that’s not necessarily a problem right away. The problem happens when you start to overload a specific circuit in your home. Attaching a power strip and then packing it full of energy-heavy devices can quickly cause circuit breakers to flip. In addition to that risk, they can quickly become a fire risk when used inappropriately. Opt for power strips with surge protectors and be careful concerning how much you plug into them. If you need more outlet availability in a space, that’s when you need to call a local electrician.

While the rugs themselves aren’t a sign of electrical problems, the wires and cords run under them are. More and more people are adapting older homes to their current needs, leaving exposed cords and cables throughout the house. You don’t need to run them under carpet and rugs. In fact, that can be a tripping hazard. An electrician can quickly run wires and cables through the walls to get the cables out of sight and out of mind.

If you own an older home, you may have noticed how your outlets don’t look quite like outlets in newer homes. For a long time, two prong outlets were the standard. No many appliances use a three prong plug style in order to provide a ground for the electricity. Don’t be someone who just cuts the third prong off of their appliances or bends it back to make it fit in the two prong outlet; upgrade your outlets instead. Properly grounded outlets can reduce the risk of electrical fires and other risks due to electricity.

It’s important to regularly check your home’s main service panel. Regular visual checks and professional checks by an electrician can help to prolong the life of the panel and help avert any problems from improper care. When you visually inspect the panel, check for any signs of problems, including potential rust. If your panel is rusting, it’s time to have an electrician install a new one for safety and performance.

If you’ve ever turned on a light switch and found that the plate was warm to the touch, then you should call an electrician. Points where power is utilized in the wall should never be warm, and definitely not hot. It’s a sign of a bigger electrical problem that could be a safety hazard.