A bright, well-lit kitchen is a must in every home. It is simply more inviting and more appealing in general. There is also a layer of safety added when you can see well when you are handling hot foods and sharp knives. A dim kitchen can make it difficult to properly judge seasoning or whether or not a particular dish is fully cooked. You don’t see dark kitchens in restaurants or gourmet setups. If you would like to bring your kitchen into the light, call your electrician. Pasadena homeowners can count on The Electric Connection to provide a qualified electrician to successfully complete the transformation.

Track lighting is certainly a better choice than a single fixture in the center of a room. The track can be in a variety of shapes and include as many or as few lights as you need. The lights can be directed into work areas to provide more focused light. The track lighting fixtures should be installed by an electrician in Pasadena to ensure it is done right. The fixtures are a favorite because they tend to make a kitchen look much bigger. You don’t have to worry about a fixture hanging in the space and giving it a cluttered look.

Another favorite in the world of bright kitchens is recessed lighting installed by a Pasadena electrician. Again, you can have as many or as little as you would like. Adding LEDs to the fixtures is a great choice. You will get a lot of light with very little wattage. A 100 watt LED bulb looks like several bulbs but only uses a fraction of the electricity. You can choose between a variety of styles to provide just the right light in your kitchen. Give The Electric Connection a call today to schedule your kitchen lighting upgrade.

Electrical wiring and materials have improved significantly over the years, but if you live in a house in which the wiring was laid a long time ago, there may be some risks involved. It is worth checking to see whether everything is as it should be.

Electricity is normally out of sight and out of mind because the cables are hidden in the walls and in switches and sockets. As a result, we rarely check the condition of our electrical installations. Faulty and aging wiring can cause electrical fires, but you can avoid this by having your electrician check them for you.

There are clear indications that can make it easier to identify aging cables. Any cables that are coated in black rubber will be quite old as they were phased out in the 1960s; the same applies to fuse boxes with wooden backs and cast-iron switches. These were also phased out in the 1960s.

During your inspection, you may see wires that look old but are intact. These will likely be safe to use. You will need to check any connections wrapped in friction tape to ensure that the tape is not unraveling or frayed. If the tape is damaged, turn off the circuit and replace it with new tape.

The biggest disadvantage with most old wires is that they do not normally implement ground wires. This may result in a person becoming the path to the ground and being electrocuted if there happens to be a short in an appliance.

There are many ways to generate electricity, including fossil fuels, solar and hydroelectricity. For the most part, all of these technologies rely on the same concept. In each of the above examples, except for solar, electricity is generated by spinning a turbine. In the case of hydroelectric power, this is accomplished by using moving water to move the blades of the turbine. For the most part, The Electric Connection and other Los Angeles electricians spend their time caring for the electrical needs of homes, businesses and other organizations. Without hydroelectricity and other forms of electricity generation, however, there would not be much for an electrician in Los Angeles CA to do.

Although hydroelectricity is not the main source of power in the United States, it is extensively used in areas such as the northeast, which generates electricity from Niagara Falls. Other important hydroelectric power plants include the Hoover Dam and the Chief Joseph Dam. This is a very popular form of energy creation because it is a very renewable resource, and very low in waste once construction is completed. Overall, hydroelectricity makes up 21% of the world’s renewable energy and 3.4% of its total energy. As with all types of energy, an electrician in Los Angeles is required to know the basics about hydroelectricity and why it is important.

How Does Hydroelectricity Work?

The most common type of hydroelectricity is generated through the use of dams. A large river or lake is dammed, and then connected to a hydroelectric plant. The dam then either funnels the flowing water through the turbines, or uses the water as it falls to spin them. Electrical circuits, which are connected to the spinning turbines, help to store and distribute the electricity to your home.

Another common way to generate hydroelectric power is to transfer water between reservoirs that are located at different elevations. This strategy is typically used to generate extra electricity during periods of high demand. Water is released from the higher reservoir through a turbine into the lower reservoir. Any extra energy generated from this process is used to pump the water back into the upper reservoir.

Tidal power stations are slightly different from the others, because they make use of the natural rise and fall of the tides. Under the proper circumstances, a tidal power source can be a very powerful addition to a city’s electrical grid.

Why Do We Need Hydroelectricity?

One of the greatest draws of hydroelectricity is that its cost remains relatively constant. It is completely self-contained. You do a web search for electrician Los Angeles give any electrical contracting company a call and they will tell you that a diverse range of electrical sources is important to the integrity of any electrical system. If one portion goes out, then other sources are ready to fill the gaps in order to keep things running smoothly.

Being an electrician in Los Angeles CA, means taking on a lot of responsibility. The technicians at The Electric Connection will quickly respond to your electrical service calls, perform electrical safety assessments, replace or install electrical circuits, custom lighting and more. They help keep everything running at your home or business as efficiently as possible, ensuring that you always have electricity when you need it.

A combination of availability and sustainability are key to keeping any residential electrical network safe and reliable is developing and caring for a variety of sources. This process begins at the power plant and ends at your home, where you should never take for granted the hard work each electrician Los Angeles CA has to offer.

Visit our company profile.

With little ones crawling around the floors, it is hard to always keep an eye on what they are doing all the time. Electrical outlets are at the perfect height for them and seem to be the most interesting thing to investigate. This convenience leads to hundreds of children suffering severe shock (electrocution) each year. This is why tamper resistant outlets are so important. If your home is missing tamper resistant outlets, it may be time to upgrade.

A tamper resistant outlet looks just like a normal outlet, to the untrained eye but have important mechanisms behind the plastic to ensure that nothing foreign can find their way into electricity. Behind the two top prong holes is a small plastic panel. This panel slides across to cover the prong holes. If a child approaches the receptacle with a key or other narrow object with the intention to insert it into the outlet, the plastic panel will prevent them. No matter how much force they apply, it will block the foreign object from entering the outlet and allowing electrical current to escape.

If this plastic panel is preventing objects from entering the prong holes, how do you plug in your normal devices then? The trick to this is that pressure must be applied equally through both prong holes in order to slide the panel to the open position. If there is uneven pressure, the panel does not move. This is how it can prevent paperclips from entering, but operates seamlessly when plugging in a lamp.

Tamper resistant outlets can prevent serious injuries to children. If you have a young one making their way around your home and you aren’t sure if you have tamper resistant receptacles, now is the best time to check. Contact your local Expert Electric at 604-681-8338. We can help to identify what kinds of outlets are used in your home, and upgrade them if needed.