Tripped circuit breaker: many of us have experienced them at some point in our homes, yet instead of asking ourselves, “Why Do Breakers Trip?”, we reset the breaker without much thought. Before flipping the switch back over to the “ON” position, however, it’s important to understand why the breaker tripped in the first place, and what can be done to keep it from happening again.

As a Top Dallas Electrician, ElectricMan Inc. understands the danger of ignoring the warning signs of a tripped circuit breaker. But first, you need to know what a breaker does and how it works.

The Job of the Circuit Breaker

Simply put, a home or business circuit breaker is a safety device that monitors the amount of electrical current going through the electrical wires in your home and shuts off the circuit if too much electricity is being pulled through it, or if there is any disturbance in the current that could result in a fire.

Whereas a fuse performs the same task but can only be used once, a circuit breaker can perform over and over with the use of a switch that trips to indicate when it has effectively cut off current to a particular area.

What Makes a Breaker Trip?

So, Why Do Breakers Trip and what kind of things could cause a circuit breaker to trip? Some of the most common causes of a tripped breaker include:

For example, in some homes, running a microwave, a toaster oven and a refrigerator all on the same circuit may cause your wires to overheat, tripping the breaker. In this instance, making the load a little lighter, or splitting the circuit, may do the trick in keeping it from tripping the breaker.

Ignoring a Tripped Breaker is Not a Good Idea

Because of the many reasons why your circuit breaker could be tripping, and because of the purpose of the circuit breaker, you should never take a tripped breaker lightly. It’s important to understand that the circuit breaker is a safety device; simply switching the circuit back on without investigating the culprit can become costly in the long run and, in many cases, extremely dangerous.

If your breaker trips consistently, chances are there is a potentially dangerous electrical issue that needs to be looked at. ElectricMan Inc. is a Top Dallas Electrician with over 27 years of residential and commercial experience in the electrical field. Call ElectricMan Inc. at 972-792-7270 to make sure that your home is safe and free from the risk of a short or a fire.

An electrical circuit is the necessary pathway required to provide power to your appliances, gadgets and electronics. Each circuit is a closed loop system that is formed by wires, a power source, load, a switch and some sort of circuit protection. The electricity flows from the power source, into the circuit and ultimately into the object that it is plugged into. After the electricity has provided the necessary power to the device, it then flows back to the original electrical source, allowing the circuit to keep the electrical current flowing in a smooth manner. There are three different types of electrical circuits: the parallel circuit, the series circuit and the series-parallel circuit.

How Do They Work?

An electrician in Santa Monica installs an electrical panel that is then broken into several circuits that provide power to your home. Whenever you plug a device into an electrical outlet, or flip a switch, you are accessing electricity that is flowing through that particular circuit. By plugging in or flipping a switch, you are essentially completing the circuit. This allows power to flow freely from the positive terminal of the power source, through the wire, and back to the negative terminal. This allows us to provide on-demand electricity to our light bulbs, televisions, appliances and other electronics.

Types of Circuits

The simplest type of circuit is the series circuit, because it provides only one possible path for electrical current. If this circuit is broken at any point along this path, none of the devices on the circuit will work. A parallel circuit, on the other hand, contains more than one path for electrical current. If one of the paths is broken, electricity can still flow to other portions of the circuit. A series-parallel circuit combines these two circuit types. Some portions of the circuit are parallel, and some are attached in series. If one of the series circuits breaks, it will shut off power to anything in that circuit. If a parallel circuit breaks, all other parallel circuits will continue to function as normal.

As an electrician Santa Monica, The Electric Connection installs and maintains electrical circuits on a daily basis. For more information, or questions about our services, visit our main website at www.theelectricconnection.com.

You may not be aware, but you can have Lower Electric Bills by changing how and when you use electricity during times that the electric company considers “peak demand” or “peak usage” hours.  Electric companies have been initiating peak usage fees for some time now, essentially charging customers more to use electricity when the demand is higher.  This is usually when more people are at home and actively operating appliances, for instance, during a hot summer month when everyone’s air conditioning is running, or around dinner time when TV’s and ovens are working along with the air conditioners. This allows the electric company to make more profit and increase revenues when most people can’t help but use more electricity as a part of their daily life. Luckily, licensed Top Dallas Electrician, ElectricMan Inc. can offer a way to avoid these charges, and Lower Electric Bills by making sure that you are using the least amount of electric company power as possible during peak times.

An Indoor Generator is a unique solution that allows you to store power, either from your power grid when it is cheaper, or utilizing other renewable energy sources, and decide when you want to use it. This highly intelligent equipment allows you to program when and where you get your electricity, providing incredible independence and capabilities for Lower Electric Bills.

Take this as an example.  One local electric company uses a general rule of enforcing peak usage fees between 4pm and 8pm, so programming your system to use power stored during off peak hours at these times will allow you to stop paying these peak usage fees, and only pay the standard rate for electricity during normal usage hours.  This is a far more effective solution, since it is impractical for most home owners to change their schedule and stop using power during these times.

Once you have an Indoor Generator system in place and programmed, the system will automatically switch to your stored power during the times that you have chosen, leaving you worry free about when you are using your electricity!

For more energy saving tips on how to Lower Electric Bills,  information on an Indoor Generator for your home, or any other services provided by Top Dallas Electrician, ElectricMan Inc. visit our website at www.electricmaninc.com, or give us a call at 972-792-7270 to talk about how we can help!

Placing electrical safety in Manassas first is the best rule of thumb where electricity is involved. Did you know that most electrical accidents in the home happen near water? Since that’s the case, we’ll start off with that important electrical safety tip. Here’s that one and four more designed to keep you and your family safe in your Manassas home.

You and your family should always feel safe and secure in your Manassas home. In this digital age when everything from toys to tools to technology relies on electricity, electrical safety in Manassas will help keep you up and running safely.