Outlets are wired into your home to make it convenient to plug in anything from an appliance to a lamp. However, an electrical fault can occur endangering your home. It’s not a good idea to have 19 different appliances plugged into a single outlet. This can cause a short; not to mention the maze of cords running through the room aren’t safe for family and pets.

Sometimes electrical faults in your system can cause a ceiling light or fan to stop working. After identifying that a bad bulb is not the culprit, you should turn off the power and inspect the light fixture itself. Check the cable and flex connections and make sure the terminal screws are tight. Use a continuity tester to make sure the flex hasn’t gone bad requiring a replacement.

Lights, fans, and other fixtures can also stop working because a residual current device has tripped. You can reset the device but if it trips again it’s best to call in a certified electrician.

If you are still experiencing problems after doing these simple troubleshooting tasks, it’s always best to call in a trained electrician. Outlets or lights that are malfunctioning could be caused by exposed wires somewhere in your electrical system. If your circuit breaker continually trips, it means the current in your home is not cycling as it’s intended. Either way, it’s much safer to have these issues repaired by a good electrician.

It is that time of year again—the holidays are here and family is calling, the darkness falls early and our homes are starting to feel more like hibernation dens…. it is time to refresh our interior environment and get set for the winter months ahead.

Combat the oppressiveness that comes with the shorter days and decreased sunshine…bring in the light, uplifting accessories and comfortable décor to make your home or office space a more easeful and gratifying place to grow, work and dwell.

1.  Invest in the best lamps (bulbs) –instant on/off, quiet operation, dim ability and the most welcoming lighting effects are available in the latest energy-efficient LED, CFL and halogen light sources.

2.  Shaded fixtures—Dark Sky outdoor fixtures, as well as, decorative shades for indoor light fixtures make a huge difference in allowing for control and providing welcoming and soothing illumination.

3.  New LED reading lamps and desk lamps are designed to offer plentiful, focused illumination for the comfort and health of your eyes.

4.  Novel lighting controls and updated switches give you the utmost in convenience and energy-savings for all your lamps and light fixtures. In larger homes or offices, it is a good idea to install switches, novel  lighting controls and automated systems that may be digitally programmed and labeled.  This is also an energy-saver, as it limits the chances of you mistakenly turning on and off the wrong lamps and having to constantly think about which switch goes with which light.

5.  Work with the natural light streaming in through windows and skylights.  A couple of task lights and a single torch lamp may be all you need to provide comfort and illumination in rooms with generous windows and plentiful exposure to bright sunlight.

6.  Accessories such as comfy pillows and throws will not only dress up your seating areas and bedrooms, they are essential in blanketing your home with warmth both visually and functionally.

7.  Choose just the right occasional tables and whimsical furniture for form and function.  Look for dual-purpose accessories to make the most of your interior space.

8.  Candles, tea lights and mini portable lamps provide soothing illumination and create ambience for quiet relaxation and romantic lighting effects.

9.  Invest in LED night lights for hallways and bathrooms to supply energy-efficient security lighting and comfort.

10. Above all else:  Do not stress about getting everything done. Enjoy the decorating process and take your time to find just the items that help to define your space according to your specific needs and unique style.

The right illumination has been known to help us cultivate healthier habits whether it be eating more slowly or studying more intently.  Make it your intention this year to surround yourself in the right light.  Comfort is really the ultimate luxury and the right lighting is the key to comfort.

Satisfy your hunger for delectable design with novel accessories and light fixtures.  Visit a Capitol Lighting showroom or 1800lighting.com to view the latest in comfort and control for the most luxurious holiday season ever!

So, you want to become an electrical contractor/engineer? Selecting electrical work as a profession brings several rewarding growth opportunities. After all, the need for electricity is on the rise in today’s society. But before you reach a decision, it’s not only important for you to know the numerous duties of an electrical contractor/engineer, but also the requirements for becoming a certified electrician.

Luckily, in this article, you will learn everything about becoming a certified electrical contractor in a step-by-step process. It doesn’t matter if you are looking to start a career in electrical contracting, or are still only considering it, the information provided below will prove useful. Here’s what you need to know:

An electrical contractor or engineer designs, develops, tests and installs electrical hardware, systems and equipment. They work in a variety of settings, including commercial and residential structures. To become an electrical contractor, you have to receive extensive training and obtain a license according to the local regulatory guidelines and standards which apply to your country.

Steps to Become a Certified Electrical Contractor

Several schools and colleges offer instructional programs for prospective electrical contractors. Moreover, a bachelor’s degree in electrical engineering offers comprehensive training in electrical design and systems. Academic programs generally include hands-on coursework and internships to help you gain practical experience.

Novice electricians can also gain supervised training under an experienced master electrician through apprenticeships. National organizations, state agencies and unions can introduce you to contractors and companies offering apprenticeship programs. These typically require a high school diploma. If you qualify, you will be offered paid positions that will last at least five years.

As mentioned earlier, electrical contractors perform a range of services for commercial and residential properties. In addition to installing and maintaining electrical systems, hardware and equipment, electrical contractors also train and hire new electricians, do administrative work, as well as plan and schedule projects with clients. They can be an integral part of the team involved in the building process, ensuring the electrical systems are up and running before the final work is completed.

Therefore, mentored training and experience in various electrical positions will provide you the industry-related and foundational knowledge and skills required to become an electrical contractor. Additionally, working under a master electrician can give you the experience and skills required for a journeyman or novice electrician to obtain a license, get certified, and perform independent work.

Some countries require electrical contractors to acquire an electrical contractor or master electrician license, while others don’t. If it’s mandatory in your state or country, you can obtain your license from the relevant state boards. However, keep in mind the requirements to get licensed will vary from state to state.

But generally, the requirements include meeting the experience requirements by working under an experienced master electrician, paying a certain amount as fee, as well as passing a written examination. Also, your license has to be renewed every few years, where you will have to pay the fee as well. You should contact the licensing agency in your state for a clearer picture about the requirements.

Once you have acquired your license, you are a certified electrical contractor and start working independently, or by joining a contracting company. But you should also understand that being an electrical contractor requires ongoing education to stay up to date with the technical advancements in the electrical domain, as well as any changes to the standard electrical code.

Electrical contractors with enough experience under their belt can also consider starting an electrical contracting business of their own. By starting your own business, you can increase your earnings from your work. Not to mention, you will have increased scheduling flexibility, which means you can employ other electricians to work under you and dispatch them to work on projects offered by clients.

And with that, we come to the end! As you can see, this article covers all you need to know to become a certified electrical contractor. Hopefully, now, you will have a better understanding about the requirements and duties the job entails.