Summer storms can get pretty wild with raging winds and crazy rain and hail. Power companies do their best to build power grids that can withstand some of the worst Mother Nature has to offer, but it isn’t always enough. There are times when power lines get taken down and residents are left sitting in the dark. Brief outages are not usually an issue, but outages that extend for several hours can be devastating. Any food in the refrigerator and freezer will likely need to be tossed resulting in an expensive waste of food. An electrician in Glendale, like those at The Electric Connection, can help you prevent damage by installing a standby generator.

A standby generator can save you from losing all the food that would otherwise become unsafe to eat after an extended power outage. The generators can also keep your life as normal as possible despite a raging storm right outside your windows. Families with young children are likely familiar with the need to maintain a normal routine that will keep the kids feeling safe. Lights are another major factor. Lights add comfort and security. It can be dangerous walking around your house in the dark.

Because the generator will need to be wired directly into your home’s electric panel, it is important to hire somebody who is familiar with Glendale electrical codes and standards. Once the installation is complete, you won’t have to worry about doing anything else. The generator automatically turns within seconds of the main power grid failing.

There are various sizes of generators and you will want to choose one based on your power needs. You can discuss this with your electrician before buying the generator. If you are ready to schedule your generator installation or have any questions about generators, give The Electric Connection a call today.

Smoke detectors (smoke alarms) are one of the most important safety devices in your home. If your home has well-maintained smoke detectors, the chances of your family surviving a house fire are greatly increased. From 2003 to 2006, 66% of fatalities due to house fires occurred in homes without working detectors (National Fire Protection Association).

Most homes have smoke detectors, but many times they are not located properly or are not working due to lack of maintenance. Of course, a smoke detector in the wrong location or one that no longer works because it has a dead battery provides no protection for your family. The Electric Connection, a fully licensed, bonded and insured electrician in Burbank CA, knows the most current code rules for smoke detector placement and they can install or replace your smoke detectors for you.

Maximizing Protection

Your family will have maximum protection if:

Can I install them myself or should I have my Burbank electrician install my smoke detectors?

You can purchase battery-operated smoke detectors from a hardware store and install them yourself. (If you decide to install your own smoke detectors, check your local building code for placing them.) For detectors that are wired into your electrical system, the U.S. Fire Administration recommends that detectors be installed by a qualified electrician. The Electric Connection, a local electrician in Burbank, can often schedule an electrical service call appointment for the following day.

Are they expensive?

Depending on the type of detector you decide on, they can run from $10-$40 each, not including installation costs. You can often get a ballpark price over the phone for installation pricing from a Burbank electrician.

How should they be maintained?

Most detectors start “chirping” when batteries have run down. In addition, the U.S. Fire Administration recommends testing them monthly. They recommend:

Are your detectors properly positioned?

The guidelines given here can help you determine if existing smoke detectors are properly positioned. If you are going to install battery-operated ones yourself, follow the placement requirements of your local building code. In general, it’s recommended that you have a smoke detector:

Within these general guidelines, detectors should be placed where smoke can be readily detected — high up on walls or on the ceiling (smoke rises) and at a distance from windows, fans, and vents that might blow smoke away from the detector.

If the smoke detector is wired into your electrical system, it should not be on a circuit that can be turned off with a wall switch. It’s always best to consult with a licensed Burbank electrician when it comes to hard wire some detector installations.

If a smoke detector is placed too close to a kitchen stove or shower, it can be triggered unnecessarily by steam or normal cooking smoke. Better to move it to a different location that also meets general safety guidelines and your local building code.

If you are uncertain about placement or need help with installation or battery replacement, call a qualified electrician in Burbank, such as The Electric Connection or visit our website.

Each year there are in excess of 50 fatalities that are caused by preventable house fires in our country, which is an extremely startling statistic. This is especially true since these fires could have easily been prevented from spreading if there had been an operational smoke detector on the property.

Having these installed on every storey in your home or commercial property is one way to ensure the response to a fire emergency, is quicker. In many instances, this can actually help save lives and property. Here are some basic facts about smoke detector installations:

The best way to ensure that your property and family are safe from a fire is to make sure that the fire gets detected early. A smoke detector is a device that’s specifically designed to quickly alert those on the property, about the presence of smoke. Typically, these could be attached either to the ceiling or a wall. These are battery-powered devices that have to be replaced on a regular basis. You also have the option to hardwire a smoke detector into the main electrical system on the property.

There are 2 main varieties of smoke detectors:

The first type is the photoelectric one that has a light – this light gets altered in the presence of smoke which in turn, activates the alarm. This kind of alarm is always quick in detecting whether the smoke is originating from a fire that’s slowly smouldering, or from a much cooler one.

This type of installation essentially has an integrated ionisation chamber which has very small amounts of a radioactive material which is able to quickly identify smoke. This kind of a smoke detector is far more effective at quickly detecting the hotter fires (when there are flames). This smoke detector emits a very small amount of radiation and doesn’t pose any danger to health.

Regardless of whether you have hardwired or battery-powered smoke detectors, it’s important to have at least one on each floor on your property. In addition to this, you should also design a detailed, yet simple emergency evacuation plan. Make sure that all the members of your family understand what has to be done in case an emergency situation arises and they hear the beeping of any smoke detectors in the home.

If you live anywhere in or around Sydney, and are planning on getting smoke detectors installed on your property, you should identify a certified, skilled, insured and reputed company to handle the job for you,.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of power factor installation solutions. The number to call is – 1300 169 263. You can also write to us at this email address. We can handle all types of smoke detector installations and all other electrical jobs too.

Thanks for reading,1300 169 263

If you are at familiar with the design and operation of a radiant heating system, then you actually have a basic idea of how snow melting systems and de-icing cables work. De-icing cables, which heat up via electric resistance heating, may be installed beneath walkways, driveways, and other paved areas, and the heat that they emanate will help in keeping those surfaces free of ice. This is, obviously, a great advantage in keeping your property safe for pedestrian traffic throughout the winter season, as well as for ensuring good traction when leaving by vehicle. De-icing cables can also be installed in rain gutters, which makes a huge difference in keeping them free of ice. When the sun beats down on your roof, snow and ice can melt. It can then refreeze in your gutters, potentially causing damage via ice dams.

Snow melting systems can also utilize hydronic systems, in which a boiler heats water, and that water is distributed throughout a system of tubing. The end result is the same. The heat radiates through the surface above the tubing, and the snow is cleared away. To learn more about such systems, or to have them installed by trained technicians, give the professional electricians on our staff a call.