You must have heard how it’s important to unplug your mobile device chargers when they aren’t connected. That’s because these chargers continue to drain electricity. While this is a fact, the truth also is that the amount of power that mobile phones and other similar devices draw, is minuscule compared to the amount of power that larger electrical appliances and equipment in your home or commercial premises use.

The electronics we are referring to are the modern, advanced ones that have standby settings; they significantly escalate your utility bills even when they aren’t being used. These energy guzzlers can easily account for up to 10% of an average-size home’s energy consumption.

As mentioned at the start, mobile phone chargers are a very good example of energy guzzlers as they don’t perform any function when they aren’t charging the phones; and there is absolutely no downside to and ensuring they are unplugged most of the time. One more classic example is the microwave that uses more standby energy compared to a mobile device’s charger; this is because the former powers a digital clock.

But it’s common for people to leave that plugged in, as many people tend to use it to check the time when they are in the kitchen. These types of devices don’t account for sizeable energy wastage; however, video games, computer, flat screen TV and home theatre systems are entirely a different story. These appliances are becoming increasingly sophisticated and use advanced technology and over the years manufacturers have begun focusing more on the amount of time it takes for these machines to start up.

That is how the “standby mode” came into existence. That isn’t an “off” mode; when a device is in the “standby mode” it continues to draw power to keep various components and processes working; this helps “wake them” very quickly once you want to use them again. In most cases, the default standby settings aren’t the most energy-friendly, but you can customize them to suit your requirements. You will be able to find more information in the product manuals that come with these devices; alternatively, you can look in the device’s settings menu for the different power options.

Though these advanced technology electronics can be an energy-drain, the simplest and fail-safe method of preventing this from happening is to pull the plug. The sure-shot way to stop devices from driving up your utility bill is to disconnect them from the devices. If you find this too inconvenient, you can utilize power strips. When you hit the main power button on the power strip, the power gets fully disconnected even when you leave the strip plugged in.

The other way to add to the energy-efficiency of your home is to look for devices with higher energy star ratings when you are purchasing any new appliances and equipment. Check on which devices use less power when they are in standby mode as well. If you have any energy-efficiency concerns about any appliances and installations in your home, call Allround Electricals today.

As a California homeowner, you know that this is not the best time to put your house on the market, which may be why so many people are opting to upgrade their existing homes instead of seeking a replacement. One of the improvements you should consider is an electrical make over.

Electrical wiring can suffer wear and tear, and older homes were simply not built to meet today’s electrical needs, but these deficiencies can be overcome by hiring an experienced electrician. Santa Monica, CA building codes have changed over the years as well, and companies like The Electric Connection that specialize in rewiring older homes can bring your house into compliance with the latest regulations.

If your home was built during the 1960s and 1970s, you may be living in a fire trap. During that time approximately 2 million homes were built or remodeled using aluminum wiring before it was discovered that this type of wiring poses a significant fire hazard. The problem occurs at the electrical connection points where the wiring is spliced to connect to a switch, outlet or circuit breaker. Aluminum expands and shrinks in response to temperature changes, a process which can cause breaks and frays over time. The US Consumer Product and Safety Commission (CPSC) has expressed grave concern over this issue stating that homes with aluminum wiring are up to 50 times more likely to have a fire than homes with copper wiring.

How will you know if you need to have all of the electrical wiring in your house replaced? Fortunately, you may not necessary need a complete rewire in your home or business. A licensed electrician in Santa Monica can evaluate this for you, and tell you to what extent you’ll need to go in order to make your home safe. The Electric Connection, which specializes in house rewires explains that depending on the situation, there might be a fairly inexpensive solution. For example, you may simply need to replace the connection points in your home or business with copper electrical connectors. Not every Santa Monica electrician is trained in this type of retrofit, so you when you’re searching for electrician Santa Monica, it’s important to find a highly trained and fully licensed electrician to perform aluminum-to-copper retrofits.

Older homes, those built prior to 1950, may have a different electrical safety issue. During this time many homes used cloth insulated wiring, something which can appear similar to the insulated wiring used today. The danger builds over time; as the cloth ages it dries and can begin to flake off. Once portions of the wire are exposed, they pose a serious shock and fire danger.

Another challenge presented in older homes or buildings with cloth insulated wiring is that this wiring was frequently not grounded. At the time there were a limited number of electrical appliances and no home computers, so grounding was not considered a serious issue. Today all new homes are grounded so that excess electrical charges caused by electric surges are routed out of the house and into the ground, protecting electronic devices, computers and appliances. An electrician from Santa Monica can replace cloth insulated wiring with a grounded system, making your home and belongings safe from electrical fire and damage caused by power surges.

Another problem with older homes is the lack of three-prong outlets, something that is necessary for most modern appliances. Many homeowners mistakenly think they can simply purchase the three-prong version at the hardware store and swap out their existing two-prong outlets, but doing so can create additional fire risks. Properly swapping out these outlets requires some rewiring so that the three-prong version is grounded. Your Santa Monica electrician can do these quickly and inexpensively for you, and can make certain that any existing three-prong versions have been installed properly.

So how do you determine what type of electrical wiring is in your Santa Monica CA home? The first step is to check the build date. If your home was built before 1950, you can call the Electric Connection for a free electrical estimate by a licensed Santa Monica Electrician. They will be able to quickly evaluate any electrical safety issues that you might have in your home or business electrical system.