Power overloads are one of the many scenarios an emergency electrician can help a homeowner address and prevent. In the event of an electrical emergency like a power overload, which can be the result of faulty wiring, only a qualified emergency electrician will be thorough enough to find the problem, repair it and help you avoid it in the future.

Overloads, though seemingly minor issues, are, in fact,  one of the most overlooked and dangerous problems you can have with your electrical system. An overload can cause everything from electrical shorts to fires. What’s more, a power overload is one of the most avoidable electrical problems—you don’t have to let it get to the point of electrical emergency.

What is an Overload and What are the Causes?

During a power overload, the circuit gets overwhelmed and shuts itself off. It’s a common occurrence in many homes. For instance, you could have the microwave, a rice cooker and a stove running off the same circuit in your kitchen when you suddenly notice that your power goes out in the kitchen while it stays on in the rest of the house. Then you check the breakers and realize that the breaker wasn’t tripped.

Because they see things like this all the time, licensed electricians can easily identify the source of the trouble. There are generally three main causes of power overloads.

 Power overloads are preventable with a little thought and planning. When ignored, however, they can result in very costly repairs—or worse.

 Electric Man: Emergency Electrician to the Rescue

Are you experiencing a power overload or another issue that requires an electrical troubleshoot? Electric Man’s emergency electrician crew is available 24 hours a day, 7 days a week to respond to your electrical emergency. Give us a call today at 972-792-7270 to learn more about our emergency electrician services. You can also connect with us on any of our social networks!

The commercial electricity for HVAC systems accounts for about 50 percent of a building’s total energy consumption. Being one of the major energy costs in a manufacturing facility, it dominates the building’s peak electricity demand. As such, improving the system’s efficiency, in order to cut energy costs, should be every facility manager’s priority.

The energy consumption depends on the climate, comfort preferences, building design, insulation, the timing of use, the size of the HVAC system, heat generated by electrical equipment, and other site-specific factors.

Building owners and businesses can reduce their energy costs by combining several measures that increase an HVAC system’s efficiency while reducing the demand for heating and cooling.

When selecting HVAC systems, pay attention to its design and controls. Components such as motors can impact heavily on the running costs of equipment because some are usually oversized to meet peak demands. An ideal system should have more variable speed control, inverter controls, economizers, demand controlled ventilation, advanced sensors and monitoring, as well as superior diagnostics. In addition, the system should be the appropriate size; not too small or oversized.

By controlling and running the HVAC motors at speeds based on the heating or cooling needs, consumers are able to realize energy savings of between 30 and 50 percent compared to the conventional constant speed operations. Most manufacturers prefer newer algorithm-driven smart microprocessors.

These provide a refined speed control that responds to the changing load in the building. Instead of using on and off cycling, these controls adjust the system according to the actual cooling or heating needs of the facility. More functions can be added through software add-ons as opposed to costly hardware upgrades.

Some of the ways to optimize HVAC systems include the use of thermostats and control systems, locating the HVAC unit in the best place possible, and modifying the ventilation and distribution. These are discussed more fully below:

A HVAC energy audit helps in identifying the operational deficiencies, hence allowing the building manager to take the necessary measures to enhance performance. The audit is often necessary because it helps in determining the amount of energy use, maintenance and upgrade requirements.

Consumers can then reduce their energy costs by optimizing, replacing or retrofitting the HVAC system to become more energy efficient. This not only increases efficiency and reduces the amount of commercial electricity for the HVAC system, but also improves the air quality.

With all the bad weather we have been hammered with this winter, our electric power stations have been maxed out trying to keep up with the demand for electricity.  With the cold, another problem has been water pipes freezing at the electric generating stations causing them to have to shut down for repairs.  Long story short, over 55 million people in America this year have dealt with power shortages.  Either being rolling blackouts, or simply no power for days.  I have received multiple inquiries from customers wanting to know if there is an alternative means to keeping the electricity on in their home without using a gas-powered generator.  Their reasons for not being able to use a gas powered generator ranged from “I live in a HOA where generators are not allowed on the outside of our home and I can’t put it on the inside due to noise and fumes,” to “I don’t have any place outside to put the generator that guarantees it won’t be tampered with or stolen.”  Some of my customers that live in condos or town homes only have a balcony which really “limits them on space.”

Whenever you have time to thoroughly clean your home, you usually try to get the portions that are hidden from view. You check under the bed, vacuum beneath the cushions, or dust the tops of shelves—anything you can do to keep every part of your home sparkling, even if there’s no one around to see it. So why would you neglect to clean the ductwork?