Electricity is an important part of our life. However, when it comes to electricity distribution, it needs to be done in a safe and secure manner. It entails several handling hazards, which, when not done safely, can easily turn into a deadly trap. There are times when accidents and mishaps happen due to the lack of safety at different power distribution units.

Therefore, to maintain the security levels at all distribution units and sub stations, it is critical to install safety devices and mechanisms. While there are many mechanisms that help in safeguarding electrical connections at residential and industrial areas, switchgear is one of the most popular ones due to its various functions and features.

Analyzing switchgears from the perspective of commercial, industrial, and institutional MV (medium voltage) distribution system, its functions are as follows:

Types of Switchgears

There are two main types of switchgears which are necessary for various commercial, residential, and industrial electrical connections. They are:

Spring has sprung. This means more days where it gets a little warm and you may need some air conditioning—but not so warm that you can count on turning off the heater for the year though. While your utility bills may be a bit lower in springtime than in other times of the year, it is still a concern. One of the best ways you can keep those utility bills even lower is by sealing your home against temperature loss. This does not cost much and is something you can do yourself—though a Glendale electrician may be able to provide advice if you find yourself with questions.

Sealing your home is one of the most effective means of keeping down energy consumption—this not only lowers your utility bills, it can reduce your reliance on fossil fuels too. Consider these tips as a great place to get started:

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.