If you have never heard of or seen the outlets that are in new homes or office buildings, you are missing out on something that could potentially save you or a family member’s life. A GFCI outlet is an added layer of safety when it comes to dealing with two things that never mix well—water and electricity. No matter how cautious you are, there is always the chance of an accident happening that will mix the two and create a life-threatening situation. Your electrician in Glendale, like those at The Electric Connection, can help you protect your family by installing GFCI outlets.

GFCI stands for ground fault circuit interrupter. The outlets are designed to trip the breaker the instant the flow of electricity is interrupted. If you were to accidentally drop the mixer in the sink or spill a cup of water on it while you were using it, the outlet would trip the breaker and cut the flow of electricity. This prevents you from getting an electric shock. This would be the case if you were in the bathroom using a hairdryer or any other appliance. The outlets also work on cords that may be damaged and at risk of causing an electric shock.

The outlets will replace any current outlets you have in the kitchen or bathroom. You may have seen these before. They have small reset buttons usually in the middle between the top and bottom outlets. Because the outlets will need to be wired, the job will need to be completed by an electrician. Glendale homeowners will feel better about using their electric appliances in areas that are prone to accidents that involve electricity and water mixing. If you would like to learn more about GFCI outlets or are ready to make an appointment to have an electrician upgrade your current outlets, give The Electric Connection a call today.

Did you know light pollution is one of the reasons why women in developed nations are 5 times more likely to get breast cancer? That’s only one of the many issues caused by the bright lights in today’s cities and towns.

This short video explores the hidden costs of light pollution:

More problems caused by light pollution include the disrupted migratory, breeding, hunting, and sleeping patterns of many animals. Far off lights can easily disorient migrating birds, making them lose their flight patterns or start their migrations too early. Bright lights along our shorelines distract sea turtle hatchlings from their natural paths to the ocean. 

Chronic fatigue in humans, along with migraines and sexual dysfunction have been linked to higher levels of light exposure.

Not to mention how much bright lights detract from the night sky. Today’s starscapes are faint and dim compared to those of yesteryear.

The history of electricity is a fascinating subject. When we see a light go on or an appliance fire up, it is hard to imagine the thought processes that went into making that possible. In this article, we will look at the history of electricity from its very beginnings to how it has evolved over the years.

Benjamin Franklin flying a kite during a thunder and lightning storm. Franklin tied a key to the end of the kite string. The electricity from the storm clouds flowed down the wet string and ended up giving him an electric shock. This would serve as the first form of evidence that electricity existed. But it would be a long time until people could actually figure out how to use electricity in a practical sense.

One of the first breakthroughs in the history of electricity occurred when British scientist Michael Faraday discovered its basic principles. He discovered he could create an electric current by moving magnets inside of coils of copper wire. This revolutionized how we use energy. Faraday’s basic theory still comes to play on how we produce power today. Although now, we have the capability of doing this on a much larger scale.

Rural Electric Administration that ensured the availability of electricity in rural areas. By 1939, the number of rural homes with electricity had risen by 25%. Farmers were able to access electrical appliances like stoves and washing machines which made life much easier for them.

If you’re in the midst of a renovation or simply rearranging your floor plan, then you’ve likely come across the need to add or relocate a light fixture. Maybe your new dining room table is a little wider than the old one, you’re adding a kitchen island with pendant lights, or you’ve finally convinced your significant other to let you get that pool table you’ve always wanted. In any case, you need to move or add a light fixture – but how and when?

First, it should be noted that, contrary to how it may seem, most light fixtures are not connected to a joist or even drilled into wood. Instead, hanging light fixtures and ceiling lights alike are located between joists and supported by electrical boxes that grip a wide surface area of the sheetrock that makes up your ceiling to support the weight of the fixture below; for heavier fixtures, like large chandeliers or ceiling fans, there are larger, even joist-secured boxes that will need to be used.

If you’re moving a light fixture, it is important to note that there are certain limitations as to where the fixture itself can go. If you wish to relocate the fixture to a place where a joist exists just above, then you’re likely going to have to use a swag hook and chain to anchor the fixture in place, as a box under a joist is not an option. That said, if you’re moving the housing for the fixture itself, you’ll need to know which direction the joists above run, then choose to move it either through the same joist cavity or drill through a joist to run the current wiring to the new housing. Other things to consider include which switch controls the light and where it is located, as it is a safe bet that a wire will have already crossed all joists above (at some point). This can prevent your electrician from drilling needlessly by allowing them to fish the wire back to the earlier point. If your switch is further away than the destination, you can bet they’ll have to do some drilling. Jumping through, between, and around the joists in the ceiling represents the largest obstacle your electrician (and light fixture) will face.

Once your location is set, all that is left is to get your electrician out to assess and perform the work for moving your box. If you’re planning on doing one large fixture over a pool table, island, or entire room, then you’ll want to take into account the power output of the fixture compared to what that circuit can safely allow for as well as the weight of the fixture. A typical rule of thumb is that anything under about 35 pounds can be handled by a standard drywall box, but something more (or with a fan) will need extra stabilization. Surprisingly, if you’re running numerous small pendant lights, the electrician may have an even easier time running the circuit and ensuring that your lights are up and running in no time. Just be sure to discuss the fixtures you have in mind with your electrician before you purchase them to know what they believe your limitations are!

Whenever you need electrical work done around your Des Moines home, contact the experienced professionals at Electrical Gurus. We are proud to offer the finest licensed local electricians in the area and are always more than happy to help out on your household projects.