Plenty of DIYers can complete an electrical project on their own without the help of a certified electrician. Sure, it’s easy to fix minor annoyances with light fixtures or outlets, but not installations, renovations, and major repairs. That’s because what starts out looking pretty straightforward can quickly turn into a disaster. Here’s a look at four specific examples that ElectricMan Inc. can help sort out.

Contact ElectricMan today to prevent a DIY disaster, or for any other electrical needs. ElectricMan is your trusted, local certified electrician with 27 years of experience. For more information, visit the ElectricMan website. You can also find us on Facebook and Twitter.

Smoke detectors (smoke alarms) are one of the most important safety devices in your home. If your home has well-maintained smoke detectors, the chances of your family surviving a house fire are greatly increased. From 2003 to 2006, 66% of fatalities due to house fires occurred in homes without working detectors (National Fire Protection Association).

Most homes have smoke detectors, but many times they are not located properly or are not working due to lack of maintenance. Of course, a smoke detector in the wrong location or one that no longer works because it has a dead battery provides no protection for your family. The Electric Connection, a fully licensed, bonded and insured electrician in Burbank CA, knows the most current code rules for smoke detector placement and they can install or replace your smoke detectors for you.

Maximizing Protection

Your family will have maximum protection if:

Can I install them myself or should I have my Burbank electrician install my smoke detectors?

You can purchase battery-operated smoke detectors from a hardware store and install them yourself. (If you decide to install your own smoke detectors, check your local building code for placing them.) For detectors that are wired into your electrical system, the U.S. Fire Administration recommends that detectors be installed by a qualified electrician. The Electric Connection, a local electrician in Burbank, can often schedule an electrical service call appointment for the following day.

Are they expensive?

Depending on the type of detector you decide on, they can run from $10-$40 each, not including installation costs. You can often get a ballpark price over the phone for installation pricing from a Burbank electrician.

How should they be maintained?

Most detectors start “chirping” when batteries have run down. In addition, the U.S. Fire Administration recommends testing them monthly. They recommend:

Are your detectors properly positioned?

The guidelines given here can help you determine if existing smoke detectors are properly positioned. If you are going to install battery-operated ones yourself, follow the placement requirements of your local building code. In general, it’s recommended that you have a smoke detector:

Within these general guidelines, detectors should be placed where smoke can be readily detected — high up on walls or on the ceiling (smoke rises) and at a distance from windows, fans, and vents that might blow smoke away from the detector.

If the smoke detector is wired into your electrical system, it should not be on a circuit that can be turned off with a wall switch. It’s always best to consult with a licensed Burbank electrician when it comes to hard wire some detector installations.

If a smoke detector is placed too close to a kitchen stove or shower, it can be triggered unnecessarily by steam or normal cooking smoke. Better to move it to a different location that also meets general safety guidelines and your local building code.

If you are uncertain about placement or need help with installation or battery replacement, call a qualified electrician in Burbank, such as The Electric Connection or visit our website.

Do you know why your home in Manassas would benefit from whole home surge protection?

You might think it has something to do with lightening. However, the reasons for whole home surge protection are more complicated than you may realize.

In addition to not experiencing a significant number of them in Manassas, did you know that whole home surge protectors can’t stop lightening strikes from damaging your electronics?

At this point, your probably starting to seriously doubt the importance, use or need for whole home surge protection. However, nothing besides a lightening rod and hope can keep your home safe from a lightening strike.

Another point to keep in mind is that whole home surge protection’s primarily function isn’t to protect your electronics and appliances from outside surges. It’s actually intended to protect your electronics and appliances from each other.

When we think of power surges we typically envision lightning strikes and electricity bursts from outside power lines. In reality the majority of surges are short intense shocks created by large appliances such as generators and HVAC motors. These smaller surges typically go undetected and usually don’t blow out the entire circuit.

However, over time, they add up. If you banged your knee in the same spot every day for a year, you might not have any significant damage on the first day, but on day 365 you’d probably have quite the bruise. The same logic applies to your electronics. Those little zaps might not degrade their performance immediately, but the problems are cumulative. Why shorten their expected usefulness and replace your appliances sooner than you have to?