You know that misusing your electrical system can be dangerous. With so much power coursing through the wiring in your home, it’s possible to cause a house fire if your system isn’t working properly.

Although an overcurrent protective device is installed on your electrical system to prevent house fires, you shouldn’t rely on that exclusively for your family’s safety. To ensure you and your family is safe, it’s important to know how to reduce the load on your circuits to prevent blackouts and the potential for a house fire.

An electrical overload is when one circuit in your household is expected to produce more power than it can reasonably handle. You don’t have to be a licensed electrician to recognize you are overloading your circuit. If you notice that your power trips when you plug in an electrical device, then you are overloading the circuit that electrical socket is on. Fortunately, there are ways you can reduce the load and prevent blackouts.

The easiest way to reduce the load any one circuit is responsible for is to use another circuit. If your circuits aren’t mapped out in your breaker box, then you can reasonably determine what sockets are associated with different circuits by manipulating the switches. Once you turn off the electricity in one room, you can test what sockets aren’t working to determine what sockets in your home are associated with each circuit. There is no danger to you by doing this, but it is time-consuming.

Armed with the information about what sockets work on the same circuit, you should distribute your use of electrical sockets across various circuits. By using other electrical outlets, you will avoid the tendency to cause a blackout.

You can improve your home’s safety by being mindful of your electrical system. If you are experiencing blackouts or you rely on a lot of electrical devices, it’s important that you avoid overloading your system. Beyond switching to a new circuit, you can have a member of our team install a new circuit which would help reduce your electrical load.

When you are not familiar with certain things, like the electrical in your home, you will have a hard time trying to identify what it is you need to make your home safe. If you have no electrical training, a light switch that doesn’t work or a breaker that pops frequently means nothing to you. You don’t know if it means you need to call an electrician or simply ignore the problem and chalk it up to a fluke. But then, it happens again and it becomes apparent something isn’t right. That means it is time call an electrician. Beverly Hills residents can count on The Electric Connection to provide prompt service when it comes to their electrical needs.

What you may not realize is the symptoms, like tripping breakers or outlets that are dead, are an indication there is something going on with the electric panel. This is something you probably wouldn’t be able to diagnose by yourself. You will need an experienced electrician in Beverly Hills to investigate the problem.

There are a couple of different reasons why you would need to upgrade your electric panel. The first is if it is too small for your electricity demands. If your home is older, this could be the case. 50 years ago, we didn’t have nearly as many appliances and techno gadgets that required electricity. The homes simply were not built for the demands we have today. Another reason you may need an electric panel upgrade is if the panel is old or still uses fuses. We have come a long way in the world of electrical equipment and there are much safer ways of powering your home than there were even 20 years ago. If you suspect your electric panel may be causing some of the electrical problems in your home, give The Electric Connection a call today.

Anytime you find yourself wanting an electrical safety inspection, it’s important to know what kinds of questions you need to ask. A lot of the time people are stuck with hidden fees or things that they are unaware of due to the lack of curiosity. Even if it seems so simple, it’s always best to ask the right questions to an electrician especially when it comes down to your home’s safety and your family’s well-being. When you see the lights start to flicker or your outdated electrical system giving you trouble, it’s time to call for a repair or maintenance check. Having an electrical safety inspection by a professional contractor will help flag any warning signs that might arise in the future. So here are some questions that can prepare you so you know what to ask when it’s time to conduct an electrical safety inspection.

Usually, when we want to hire somebody we always like to know that who we’re hiring has had an education within that field. However, when it comes to hiring an electrician to conduct an electrical safety inspection, experience and how much of it is especially important. Experienced professionals not only have seen a lot and can provide effective solutions, but they also recognize the importance of high-quality performance and customer service. By asking about their experience, you’ll be able to determine how qualified that contractor is to handle your electrical safety inspection.

When it comes time for an electrical safety inspection, you want to make sure hire an electrician that has a valid electrical contractor’s license. This will make you feel more comfortable knowing that the person you’re hiring is educated and trained to perform a high-quality electrical safety inspection since they are being held to a high standard as a licensed professional.

During an electrical safety inspection, things may come up where the electrician might either want to fix or restore a certain business. So, asking about an estimate and whether additional work is covered is always a great question to ask.