A smart thermostat is an upgrade from the standard controls of a heating and cooling system. These digital devices are programmable, adjusting the temperature up or down according to the time of day, but what really sets them apart is their wireless connectivity. You can control a smart thermostat remotely through the Internet with a smartphone, tablet or computer. Once your thermostat is installed, they’re easy to use, efficient and give you data that helps you save money.

It’s happened to nearly everyone. You come home and your heating or cooling system is running even though the house has been empty for hours. With a smart device controlling your furnace and air conditioner, you avoid this wasteful situation. Set your HVAC controls to mesh with your weekday and weekend routines. If you get up everyday at 6 a.m., program the thermostat to feel comfortable as you wake up. When you leave for work a couple of hours later, your furnace will adjust to the temperature of your choice.

Controlling your thermostat remotely with a smartphone is especially helpful if you have a change in schedule. If you come home early, adjust the heating or cooling system on route with a phone or tablet. Your home will progress to a comfortable temperature in time for your arrival. Abrupt changes in temperature waste energy, so resetting your thermostat remotely for a gradual change is economical.

Smart thermostats give you a lot of data in real time, allowing you to monitor energy use and approximate costs. Once you take a look at your habits, you might find ways to fine-tune them. Some thermostats also have apps that guide you to the most economical settings.

Electrical installation testing is a practice that has become more important over time. This is due to the increasing complexity of installations in both commercial and residential spaces. When it comes to electrical work, the top priority is always going to be safety. This focus is the reason electrical standards and wiring regulations exist in the first place. Electrical installation testing serves the purpose of identifying any possible deficiencies. These shortcomings could be areas in which an electrical system doesn’t meet regulations.

It’s important to have older electrical systems looked over to ensure they’re still in good working condition. At the same time, new installations need an inspection to make sure they conform to today’s stringent standards. You might also feel inclined to have testing done if you’ve recently purchased a building with preexisting installations. If you’re curious about what makes electrical installation testing so complex, or if you’re wondering why only a professional should be doing it, read on for more information.

There are different phases of an electrical installation to keep in mind. The first step is to perform a visual inspection, which is exactly what it sounds like — an expert will confirm the permanently wired electrical components are compliant with safety regulations. He or she will make sure there are no outward signs of damage, and that the required safety measures are present.

After the visual inspection, electrical testing begins. This is where having a qualified individual working becomes even more critical. Everything from specialized training to safety-oriented clothing is necessary for this aspect. In fact, non-authorized people might have to keep a certain distance away from the testing itself.

The testing will cover a building’s wiring, as well as its various components. This can include electrical panels, outlets, distribution boards and lighting. Essentially, the examination covers all systems that conduct electricity within a building. The electrician will use the tests to make sure every necessary precaution is in place to reduce the risks of injury or death due to electrical shock.

In some cases, the testing will call for exploratory work to complete the job as effectively and safely as possible. Parts of the system might need to be temporarily shut off for this. This means you should make sure you don’t have something important — and electricity-based — going on while the installation testing is taking place.

Sometimes replacing a light switch or an outlet can be a quick job done in an afternoon. You may think looking up a ‘how to’ video on YouTube is all you need. But remember, electricity is dangerous and if you are not sure about what you are doing, it is better left to a professional. Here are a few troubleshooting tips to review before calling a professional electrician.

A common problem that can occur is circuit breaker tripping. If you find that power to certain parts of your home is constantly being shut off and requires you to use the circuit breaker to turn it back on, the line could be overloaded. Having to many appliances or electrical devices on one circuit can be too much for the line to handle and will cause the breaker to trip. To avoid this, try placing devices on a different circuit or unplugging appliances before you begin using another. If you continue to have problems you may have an issue with the circuit or one of your electrical devices. It may be best to call an electrician to diagnose the problem further.

Light bulbs must be replaced from time to time; it’s unavoidable. A common problem you could experience is dim or flickering bulbs. Turn off the power to the bulb and replace it with one you know is working properly. If the problem persists, there may be an issue with the socket or the wiring and it is best that an electrician takes a look at the problem.

While there are countless problems you can experience in your home, a good rule of thumb is to stay within your comfort zone. Everyone has a different level of knowledge about electrical systems but if a problem exceeds your understanding, it is best left to a professional. If you are unfamiliar with rewiring new sockets and switches, leave them alone and call an electrician. Tampering and altering wire connections can result in serious injury if not done properly. Be very cautious if you come across an exposed wire or are constantly being shocked, you could have a major safety issue on your hands. Make sure you shut off all power to the area or appliance you are unsure about and contact a professional.

Have you ever walked into your kitchen and tried to use the toaster only to discover it had been unplugged. Then you remember you unplugged it because you needed to use the can opener and didn’t want to unplug the Crockpot, interrupting your dinner. If you have ever experienced anything like this, then you probably need the help of an electrician in Pasadena, like those at The Electric Connection. Stop the frustration by having an electrician install additional outlets in your kitchen.

Older homes that have been renovated and made more modern tend to overlook the outlet situation in the kitchen. Fifty years ago, kitchen appliances were very minimal or considered a major luxury. In today’s world, we can’t make coffee or open a can of beans without an electrical outlet. With all the lovely appliances available today that make our lives easier, it is only normal we would want the power to use them.

You can remedy the situation with the help of an electrician. Pasadena residents can transform their kitchen into a space that works for them by having additional outlets installed. Before this can happen, the electrician will need to check out the existing electric panel to determine whether or not the current breaker can support more outlets. In most cases, an additional breaker may be needed to support the outlets. This is something an electrician can take care of for you. When it is time to install the new outlets, it is a good idea to have the electrician replace the old outlets in the kitchen with GFCI outlets. These are the standard in new home construction in the kitchen and bathroom areas. They prevent electric shock if water is splashed on an appliance. If you are ready to make your kitchen start working for you, give The Electric Connection a call today.