Surge protection can keep expensive electronics and appliances safe from Kauai’s common power surges.  During our storms, voltage spikes can be harmful to appliances and electrical devices in your home. An increase in voltage above an appliance’s normal operating voltage can cause an arc or high surge of electrical current within the appliance.  The heat created in the arc and/or the power pulse causes damage to the electronic circuit boards and other electrical components.

Example:

A customer’s  washing machine stopped working properly,  after having purchased it fourteen months ago from a major retailer on our island.  Were they covered under product’s warranty?  No.  That lasted for one year with no added extended service protection (which can cost about $400 more on top of the appliance floor price).  They called the retail store’s service man to come out and repair it.  Seven days and $230 dollars later, the small electronic part was replaced, back and running for the time being.  What caused the broken part?  Most likely a large power surge or a series of smaller surges that can break down the inner electronics–an appliance only fourteen months old!

What about your appliances or electronic equipment?    Are they protected from the next storm or outage?

Solution:

A surge protector…..Installing a whole building surge protector connected to your electric panel gives you that needed protection. It absorbs the spiked energy caused by these surges from our power lines or lightning strikes.  The surge suppressor Blue Sky provides, protects electronic devices from higher than needed voltage levels. It protects electronic devices (televisions and computers) and  appliances (washing machines and dryers) with electronic parts from surges that originate from within the home, from the utility service and from other wires that connect the devices to the outside, such as telephone and cable television connections.

Call us so you can protect your appliances and electronics from costly electrical surges.  Let’s not get too acquainted with the appliance repairman. Call: (808) 647-0599

Cappuccino Doughnuts courtesy of Ann Stratton from CountryLiving.com

Find your angle. 

Playing with the direction and angle of your light source is essential. With the right play between light and shadow, you can accent the most titillating parts of your dish, while camouflaging any flaws. Texture greatly contributes to the delicious appearance of most any meal. Notice how the angle of the light below highlights the different textures within this broiled flank-steak sandwich.

As a Richardson electrician, I am in the unique position of knowing how homeowners can save money on their power bill. In today’s economy, my customers expect that I will know how they can lower their power bill each month, and I am happy to share that information with them.

The benefits of having your Richardson electrician give you the inside scoop on moneysaving power alternatives extend well beyond the impact on your bank account. Electricians everywhere will agree that those very same things that you can do to save money on your electric bill can also help you take good care of your electrical system and even prevent costly and time-consuming repairs.

Your local electrician can help you create a plan of action to start saving on your bill, but you can also follow these simple tips to start doing what you can to lower your bill today.

1. The simplest thing you can do is turn it off if it’s not in use. That’s right! Being mindful of your power consumption while you’re trying to save money seems like a no-brainer, but many people overlook this very simple and very effective first step.Turn off the lights if you’re not in the room, turn off televisions and computers if they are not in use, and unplug small appliances that don’t get used often, like hair dryers or toaster ovens.

2. Install solar panels and/or wind turbines on your home to generate alternative sources of energy, ease strain on the power grid and lower your overall usage. Any top Richardson electrician will agree that using alternative energy sources can lower your electric bill to almost nothing while helping the environment.

3. Along the same lines, investing in an indoor generator can also help you become more independent when it comes to your power consumption and it can even help you turn your power bill into a power check from the power company, depending how much power you are able to generate and send back to the grid.

4. Schedule routine electrical maintenance once every one to two years, to check for any electrical problems, to make sure that fixtures are properly in place, and to check if any appliances are in need of repair or replacement. Call your Richardson electrician to schedule a visit to your home to inspect your electrical system.

5. Install a power conditioner to reduce wear and tear on the motors of your most power-hungry appliances and machinery at home, and to lower your power consumption as well.

As a top Richardson electrician working in North Texas for many years, I can tell you that there’s nothing more relieving than looking at your power bill and seeing the massive change in the numbers. Electric Man has been working for 27 years to ensure that their customers pay only what they have to, while helping customers cut down their bills. Learn more about Electric Man and our services by visiting our website, giving us a call at 972-792-7270, or connecting with us on any of our social sites!

Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.

Winter is well on its way in the DMV area. So are you prepared for the worst-case scenario of a power outage? If not—you could be facing cold days and nights without power in the event of a severe winter storm! That means now is the time to start prepping your generator to make sure you’re ready for when the worst happens. It’s better to be safe than sorry!

For generator maintenance, contact the experts at Kolb Electric today!

With a few easy tips, you can make sure you have warmth and lighting all winter, regardless of the weather outside. For your generator, make sure you:

In addition to these checks you can do on your own, it’s important to have your standby generator inspected by an authorized sales and service dealer. Remember—many home and commercial generators have a limited warranty and require service from a licensed technician in order to make sure the warranty can be honored.