By: Emilie Sims

Electrical outlets are found in nearly every room of the home, which represents a constant risk if you have small children. According to the National Fire Protection Agency, approximately 2,400 children each year suffer severe shocks and burns from inserting objects into the slots of electrical outlets. Additionally, there are an estimated six to 12 child fatalities each year related to this. Prevent this from happening to your family by childproofing the electrical outlets in each room of your home.

Also known as safe plates, these are additional covers that sit on top of your existing outlet and are held in place by a screw. There is a spring-loaded plastic cover that prevents your child from poking anything inside of the outlet.

Installing tamper resistant receptacles (TRRs) around the home provides a permanent solution to help reduce the risk of childhood shock and injury. TRRs, which look like ordinary outlets, are designed with small, spring-loaded receptacle plates that close off the slots, but open when equal pressure is applied to both sides. This design prevents children from inserting fingers or other foreign objects into the slots, and reduces risk of electrical shock or injury.

There are also several types of childproof electrical outlets that you can choose to install that will provide a permanent way to reduce risk of child injury.

This tamper-resistant outlet contains both a switch and an outlet to plug in devices. The dual mechanical shutter system blocks the insertion of objects into the outlet, increasing your child’s safety.

A ground fault circuit interrupter (GFCI) outlet can be identified by the “test” and “reset” buttons located on the receptacle. A GFCI outlet helps protect you from electrical hazards by shutting off the electricity circuit when it detects an imbalance. The National Electrical Code requires these outlets to be installed in water susceptible areas, such as the kitchen and bathroom. Test these outlets once a month to ensure they are working properly.

These receptacles look similar to standard ones, but the two outlets have the ability to spin 360 degrees. These outlets also allow you to use two large plugs at once.

Visit the Electrical Safety Foundation International and the National Fire Protection Association for more information on keeping your family safe around electrical outlets.

Any building, in any industry, in any area of the world, is susceptible to having potentially hazardous and radioactive exit signs installed throughout their building.

This could mean they are in schools, near your office, or anywhere else where a radioactive setting probably isn’t a desired situation to be in.

This is why we thought it was necessary to create this post to help and guide you towards identifying, removing, and finally replacing your radioactive exit signs with new signs that are much safer and even efficient, saving you money over other alternatives.

Firstly before we can remove and replace these seemingly nuclear exit signs, you have to be able to identify if you have them or not. But before that, lets explain what exactly makes these exit signs radioactive.

How are some exit signs radioactive?

Just the same way as some exit signs are safe, it is all in the way they are built. For some reason, whether it be technology of the time or something else, people assumed it was a good idea to create exit signs with Tritium, also known as 3H or H-3. Tritium is a radioactive isotope of hydrogen, causing exit signs made with this to be radioactive by default. The only seemingly positive upside to these exit signs is that they are non-electrical, meaning they won’t rack up anything in electricity bills.

But before you become alarmed with what we have shared with you so far, tritium emits only a low-energy beta radiation, which in turn causes the sealed glass tube it is in to glow (causing the exit sign to give off the illumination it requires). Thankfully, it is rather well known that this type of radiation can hardly (if at all) penetrate a piece of paper or clothing. So while yes it is a very low level (energy wise) type of radiation, the fact that there are alternatives that will remove radiation entirely from your building is all the reason to uninstall your tritium exit signs and replace them with something more safe, like LED exit signs.

Now that you understand the technology and how tritium in exit signs work a little bit more, let’s go over how exactly you can identify whether or not you have these types of exit signs in your building.

Identifying a radioactive exit sign should be fairly easy. All of these signs are required to have some sort of “Caution of Radioactive Material” warning on the fixture.

If you do find such a warning label, it is safe to say your light is made of tritium. Another tell-tale sign is whether or not your signs are connected to an electrical source or not as tritium signs do not require any such connection.

Once you’ve identified if you have a tritium exit sign or not, if you do happen to have one, you may continue on to removing and replacing it with the alternative exit sign, LED.

As with any lighting fixture, we recommend to bring in a professional contractor to do the job. But as a general guideline, you can typically recycle your tritium signs by returning them to the manufacturer or place of purchase.

If you purchased the building with them pre-installed and are unsure of where they came from after inspection of the signs for any brand markings, you can try two things:

1: Try contacting the previous building owner or collect records of where they were manufactured

2: Recycle them with a third party. like these), buying them, then installing them yourself or with a professional (we recommend a professional).

Here are a few things you should remember and keep in mind when dealing with a building that has radioactive exit signs:

This episode of Operation Build aired nationally on the History Channel Saturday morning, April 18th at 8 am and on H2 April 25th at 7:30 am.  In case you missed it, here is the link…

See a home transformed as good lighting turns into great lighting with the latest innovation and exquisite lighting design. 

Architect/Lighting Designer Joseph A.  Rey-Barreau and Capitol Lighting President Eric Lebersfeld meet Operation Build.

Lebersfeld of Capitol Lighting and Rey-Barreau of the American Lighting Association (ALA) invite us in for an exclusive tour of one of South Florida’s luxurious estates as secrets of turning good lighting into great lighting are revealed.

Don’t miss this opportunity to get the latest lighting information and see for yourself how great lighting makes a world of difference in the look and feel of your environment.

With so many options in LED (light emitting diode) and CFL (compact fluorescent) lamps, the creative design capabilities are vast and lighting designers are implementing decorative schemes that are truly amazing.  Rey-Barreau offers the latest lighting techniques and an insider’s view of the incredible changes taking place in the lighting industry.

See more with Rey-Barreau at 1800lighting.com:

Fixing the wiring in your home is not something that you want to trust to just anyone. The possibility of shocks and electrocution as well as the danger of electrical fire presented by a poor wiring job are too serious to risk doing your own electrical work, and an inexperienced electrician can provide shoddy work that impacts your safety and your wallet.

For all things electrical, from installing a new outlet to rewiring a new addition, you need the skills, training, and experience of a licensed electrician. There are many good reasons for narrowing your search to only include local electricians.

An electrician who works and lives in the area is most familiar with local building codes, material vendors, and the procedures necessary to get the required licenses. What’s more, electricians are licensed by individual states (and the District of Columbia) and are only permitted to work in those state(s) where they have passed the licensing exam and where they meet the continuing education requirements.

Another good reason for working with a local electrical contractor is that when you work with a local small business, the dollars you spend stay in the community rather than going to the corporate offices of a large company or big box retailer. Local electricians are your neighbors and will spend the dollars you give them at local restaurants, retailers, and community service programs.

Lastly, though possibly most importantly, local electricians rely on their reputation for their livelihood. They’d be out of business quickly if satisfied customers didn’t recommend them to their neighbors, co-workers, church members, and friends. For that reason, a local electrician has an extra incentive to do quality work on your project.

At Kolb Electric, we’ve been helping Maryland, Northern Virginia, and Washington, DC homeowners with their electrical needs for more than 90 years. We live right here in the communities near you, shop in the same stores, and support the same businesses. We’re familiar with the houses in this area as well as the local building codes and licensing requirements. We also know where to get the best prices for you on quality electrical supplies.

To learn more about how Kolb Electric can help you with your next electrical project, large or small, call us at 877 287-1179 or contact us online today.