hazardous location lighting.

The National Fire Protection Association (NFPA), National Electric Code (NEC) 70, defines hazardous locations through a system of classes, divisions or zones, and groups that products must be labeled as to be used in those areas. Hazardous area classifications are based on the general type of substance or material that is present in the area, the likelihood that it exists, and more detailed specifics, such as ignition temperatures and combustible properties.

Class I:

A Class I hazardous location contains flammable gas, liquid-produced vapors, or combustible liquid-produced vapors that can be present in quantities large enough to create an explosion.

Typical locations include airplane hangars, vehicle paint shops, commercial laundromats, and gas plants.

Class III:

This type of location contains easily ignitable fibers or flyings in the air but that aren’t likely to be in suspension in amounts large enough to cause an explosion.

Typical locations include textile mills, cotton mills, and sawmill facilities.

explosion-proof LED lights that are safe for use in a variety of hazardous locations. Click each photo to see details, including a complete list of classifications and certifications.

If you have any questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Appliances can make for exciting and valuable additions to your home; however, they use a lot of electricity and can ultimately take a toll on your electrical system. As a Plano TX electrician is called to help install the appliance, the importance of appliance installation safety is ignored and the awareness of potential dangers and mistakes in installation is minimized. As a result, things that at the time of installation seemed trivial in the long run can cause significant problems.

Ideally, with the help of a www.electricmaninc.com. Also, feel free to ask your questions in the comments section of our blog and we will get back to you soon.

Electrical jobs should never be turned into a DIY project, unless you have formal training and experience in the field. While electricity is extremely useful and necessary, if it isn’t handled correctly, it can be pretty dangerous too. If you get a novice to handle the job for you that can result in overloaded circuits, poor wiring connections or even faulty grounding, which can be extremely dangerous to you and your family and result in a fire outbreak as well. Here are some common services for which you would need to call in an electrician:

The main electrical panels provide electricity to your entire house. If you have older panels with fuses and older wiring, those may not be able to bear the load of any new appliances you decide to install on your property. The latest electrical appliances tend to add heavy loads on the system and your older wiring installations won’t be able to support those loads. If you are getting new appliances, call in a licensed electrician to test and inspect the wiring and circuit breakers on your property.

If you need any new outlets installed or need existing ones converted to USB ports, you would have to call in an electrician for the job. Oftentimes, electrical codes necessitate that a minimum of 1 outlet in your kitchen and bathroom be a GFCI outlet. These are specifically designed to shut off the power in case there is an imbalance in electricity or if water comes in contact with any of the electrical equipment or fittings; this helps in preventing shock in these areas.

It’s important that there be proper grounding as lack of it can result in power loss or a fire. Aside from this, if you require any additional outlets, your electrician will be able to install those for you as well. Installing additional outlets requires replacing a segment of the wiring and cutting into the walls, and this is something you should never do on your own. Many new electrical gadgets come with USB charging systems and you can get the local electrician to replace some of the standard ones with the USB ports, if required.

There are times when homeowners feel that the outdoor spaces on their property can do with better illumination. If you want new security or ambient lighting installations, you should just call in the electrician. He will extend the wiring to the outdoor spaces and ensure that it has the proper grounding as well. They will provide advice on which electrical fixtures would work best in an outdoor setting.

This may seem like an easy job, but it’s best to get a professional electrician to handle this for you as well. The electrician will check whether the amperage is sufficiently high to support the wattage of the new light fitting. If it is lower than that, the electrician will have to extend an additional wire from the main circuit breaker.

Aside from this, even things like fitting powerpoint covers and replacing light switches is something that only a certified and licensed electrician should handle. They will take all the necessary precautions while doing any kind of electrical work on your property.

We at Allround Electrical can provide excellent electrical upgrade and maintenance solutions. For more information, contact our friendly team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263