There are many handymen all over the world, and while we salute them, we have to remind everyone that there are licensed professionals in place for a reason. Your brother-in-law might be able to get the quick odds and ends completed, but if the job is not being done right or a larger problem surfaces, take care of it correctly or you could be paying more than you expected to save.

Licensed electricians are licensed because they have gone through the training and testing necessary to do the job safely and correctly. After years of training on the job and in the classroom, licensed electricians are required to complete an exam that tests their full understating. This process allows electricians to enter the field with the right knowledge and experience under their belts.

As a licensed electrician, we can obtain permits on your behalf. Some work requires you to apply for a permit from the city. If you do work that is not permitted you can be slapped with a fine you didn’t budget for. An Expert Electrician will help to identify the required permits and avoid costly fines.

Part of all the training that licensed electricians go through is to sharpen their sense of safety and make them aware of any dangers on site. When our electricians begin their work they will identify any hazards that could harm the home and its occupants. This means when a job is done, all safety issues will be addressed and you can have peace of mind about the work completed.

When you hire a licensed electrician you can be sure they understand all the safety codes and building codes. Any work performed will be done up to code so it does not need to be redone in the future.

So while we respect all those handy people out there that like to get the job done themselves, we want to encourage you to use the experts when the occasion calls for it. Don’t let your home end up on a disaster DIY show.

Decorative LED path lights are the perfect gift for dads who want to add an upscale look to their yard. Shade styles include mushroom, frosted glass, offset cone, or hammered cone, and offset linear light heads are also available to direct illumination exactly where it’s needed. These LED path lights can be used for numerous applications, such as garden lights, patio lights, driveway lights, walkway lights, or sidewalk lights. The long-lasting fixtures emit up to 155 lumens of warm white illumination. They’re constructed of powder coated bronze or black aluminum and are weatherproof as well as rust resistant. Each path light comes with a screw-on ground stake.

This easy-to-install, low-profile light mounts directly to a junction box or in a can light housing. It’s perfect for low ceilings, basement, garage, hallway, closet, bathroom, workshop, and shed lighting. The long-lasting LED ceiling light consumes eight times less power than incandescent bulbs with equivalent output. It emits up to 1,100 lumens of natural white or warm white illumination and has a high color-rendering index (CRI) to show the true colors of objects and surroundings. A removable E26/E27 Edison screw base is included along with hardware for mounting to a junction box or in a can light housing.

Help him enhance the look of his boat while increasing nighttime visibility! LED underwater boat lights can be used as transom lights for colorful wakes, attracting fish, or for nighttime swimming and diving. Single-, double-, and triple-lens versions are available, and the underwater lights produce powerful red, green, blue, white, or RGB color-changing illumination. RGB underwater lights are capable of nine dynamic color-changing and single-color modes with an RGB controller and RF remote (sold separately). The LED lights are designed to last 42 times longer than underwater lights with incandescent bulbs.

Choosing the right size depends on the level of energy independence that a renewable energy owner wants. It may simply boil down to what you can afford. These levels range from 100 percent or completely off the grid (the most costly), to a simple energy backup for emergencies.

100% energy independence or completely off the grid: this requires a huge investment in terms of generation and storage. In addition, it may require other power sources such as fossil fuels or wind generators.

High energy independence: This requires a solar system with enough batteries to last a few days or even through the winter. PV systems are sized to enable the owner to have surplus energy to store during summer and be self-sufficient through winter without relying too much on the grid. The customer will still rely on the grid for backup just in case there are prolonged days of bad weather.

Summertime independence: Customer installs just enough panels and storage capacity to get through a normal summer day but will have to draw power from the grid during the winter.

Peak time independence: Battery size should be large enough to supply power during peak times when electricity rates are highest.

Reduced reliance on the grid during peak times: Some customers cannot afford to install enough storage to cover their entire peak time usage. In such a case, some will install a system that will enable them to at least reduce part of their grid usage during these times.

Emergency power backup: This requires smaller energy storage, enough to cover a short power outage. Some customers use this together with fuel generators. Battery storage is only required for the short duration from the time grid power goes out, to when the alternative power becomes available.

Even though a solar energy system is a great investment that reduces your electricity bills, it is not possible to completely get off the grid without investing in large storage systems. However, adding modest battery storage to a grid connected to solar systems is a better way of increasing your independence from the grid without spending too much.

Most marketers have online tools that can help you get the right size battery based on various factors. However, it is advisable to consult professionals for the best advice.

Customers with solar systems are increasingly adding battery storage to reduce their electricity costs or become independent from the grid. With better technology and prices getting lower every day, battery storage is becoming an appealing component to many solar power system owners.

This type of storage allows the customer to charge their batteries during the day and then discharge them when there is no generation. This permits homeowners and businesses to have a backup power source and save on electricity bills. In addition, you can sail through cloudy periods or other times when power generation is low.

One studied alternating current (AC), and the other, direct current (DC). And yet, the world would not be where it is today without their contributions to science and electricity. In light of Nikola Tesla’s birthday on July 10, Mr. Electric is taking a look at the electric Tesla vs. Edison feud.

The main focus for Tesla was alternating current: an electric charge that periodically reverses its direction and is delivered to customers through a transformer. It travels at a much higher voltage than direct current and is more effective because of its ability to travel greater distances while maintaining a constant voltage.

Edison focused his research of electricity on direct current. A key difference between alternating current and direct current is that direct current only flows one way. The voltage of direct current is also constant but it is better when the electricity produced has to travel in short distances.

Edison was working on a system to generate direct current. When he could not get it to perform correctly he hired Tesla, an engineer and graduate of The Polytechnic Institute, who studied electromagnetism, promising him $100,000 if he could correct the problems Edison was having with his research and invention. Tesla corrected the problems but was not given the money. Tesla resigned and Edison spent the rest of his career trying to discredit Tesla’s research and work with electricity.

Today, nearly every home and business in the world is powered using Tesla’s alternating current. The ability of alternating current to travel over long distances and efficiently power everyday home and business electrical equipment eventually overtook Edison’s research on direct current. Edison did not lose out completely, as most battery-powered devices, fuel cells and light emitting diodes use direct current. As the push for alternative energy sources is on the rise, many manufacturers are looking at how batteries and electricity can change the way we look at fuel and the way goods are produced. Whether the electricity being used is AC or DC, Tesla helped us get where we are today.