We consider light pretty important over here at Pegasus. For hours, we could talk your ear off about LED innovations and fluorescent installations. Although choosing the right under cabinet light is important, and knowing how to place your recessed cans is essential, there is no light as vital to the human body as a little sunshine.

As its name implies, an Arc-fault Circuit Interrupter is designed to detect electrical arcing, and turn off the current to wiring or appliances where arcing is occurring. An electrical arc occurs anytime an electric current jumps through a gap or air space between two conductors. This typically produces a visible spark or sparks. We’re all familiar with small sparks which can be seen inside electric tools and motors, and tiny sparks which may occur when we plug an electrical device into a wall outlet. Small levels of arcing are normal and benign in these places, but dangerous arcing is a different matter. Dangerous levels of arcing can involve damaged insulation, worn or broken conductors, many other electrical problems. This type of arcing is the single greatest cause for electrical fires across our continent and has resulted in hundreds of human fatalities, hundreds of thousands of fires, and billions of dollars in property damages. AFCI’s are designed to detect dangerous levels of arcing while ignoring benign occurrences. When dangerous arcing occurs, an AFCI will immediately detect this and turn off the electrical current for the affected circuit. If someone tries to reset the AFCI, and it trips again rapidly, this is typically an indicator of a larger problem.

While a GFCI is designed to detect electricity which has become shorted to ground, an AFCI is designed to detect arcing within wiring or electrical devices or appliances. AFCI units look a lot like circuit breakers and are typically located inside breaker boxes, rather than outlets. However, they are able to detect dangerous arcing conditions a breaker cannot detect. In addition, AFCIs are manufactured for circuits carrying up to 100 amps, so they can protect buildings from arcing in large equipment like stoves and central air units.

AFCIs have been developed and mandated by law to protect lives and property from electrical fires caused by arcing. However, many older homes and buildings have not been retrofitted with these devices and remain unprotected. To make matters worse, older buildings are more likely to have outdated wiring and appliances, and insulation problems and other conditions which cause arcing problems.

If you are concerned about your wiring and would like to schedule a safety inspection, call Bryant Electric Service at 512-402-8587. Our electricians are licensed and equipped to inspect electrical systems, and can determine if your home or building is sufficiently protected by AFCI protective devices.

During a lightning storm, the safest place to be is indoors. However, there are still several safety precautions one needs to take to stay safe in your own home. The three most common ways lightning can enter your home are through a direct strike, through inner/outer wires and pipes, and through the ground.

To know how at risk your home is during a storm, you can use a guideline that meteorologists call “The 30-30 Rule.” If you see lightning and then hear thunder within 30 seconds, move indoors and take necessary safety precautions. This typically indicates that a storm is fewer than 6 miles away, which is close enough for a lightning strike. Then, stay indoors for at least 30 minutes after you hear the last clap of thunder at the end of the storm.

The following guidelines can give you additional protection against electrical injuries during harsh, stormy weather:

Injuries caused by lightning strikes are more common than most people realize, but the above considerations and safety guidelines can help secure both you and your home during inclement weather.

Your home is supposed to be your safe place, your sanctuary, but if you have an older home, it can quickly become a nightmare. Old home wiring, especially if the wiring is 50 years or older , can put your home and everyone it it at risk for an electrical fire. While wiring doesn’t quickly age, it does age, it does break down, and it does carry risks. Keeping an eye on your home’s wiring and the way that it behaves is one of the best ways to avoid an electrical fire and protect your home. Your home is trying to tell you exactly what it needs more often than not, so keep an eye out for some of the following signs that your home’s wiring is too old and needs to be replaced by a professional electrician.

While there could be a variety of reasons you might have dimming or flickering lights in your house, if it becomes a regular occurrence, it’s time to get an electrician out to your house. These kinds of symptoms are your house telling you that there is something going on in your electrical system. Whether it’s that there is too much power being drawn at one time or that the wiring is failing, a licensed electrician can help to diagnose and fix the issue.

If you’ve had a rodent problem in your home at any time, it’s exceptionally important to have your electrical system evaluated. While rodents would prefer to munch on the cereal in your cabinet, there is something about home wiring that is exceptionally appealing to them. While they’re burrowing around in your walls, there is a high chance that they either chomp through wiring or knick it enough to expose the wiring to the insulation in your walls. Both scenarios can put your home at risk for an electrical fire at any time.

If you’ve never had a circuit breaker trip on a regular basis, then you probably don’t know how absolutely frustrating it can be, especially when the problem is probably hidden somewhere behind the walls. A circuit breaker that continues to trip is a big indication that something is wrong with your wiring. Instead of trying to force it on, make sure to call your electrician to help root out the cause of the problem in order to fix it.

If you’ve ever gone to plug in an appliance and been shocked, that’s probably not a good sign. However, if this happens regularly where you get shocked or your switches and outlets start to look discolored from burns, you have a big problem on your hands. These signs are indicative of a wiring problem and wiring shorting from the energy heavy appliances that are more common today. Don’t just hide the problem with a new outlet cover, have the problem checked out and repaired.

Lastly, don’t dismiss random burning smells or the sharp smell of burning ozone. Both could be indicators that something is going on behind your home’s walls that you can’t see. When you flip a light switch, this connects a live electrical wire and allows power to continue into a light fixture or appliance. If there is burning when the switch is flipped on, the odds are the problem is in the wiring that connects the switch and the light fixture. However, a licensed electrician can determine the extent of the damage and what the problem is.