If you are a fairly handy person, then there may be a handful of small home electrical repairs that you want to take care of yourself. If you are not a skilled electrical professional, however, you should not put your life at risk. Always place your trust in an experienced electrician in Burbank. Although some tasks may seem safe enough to handle on your own, you should not even think about it unless you have been properly trained to do it. Regardless of how old your home is, you will encounter electrical problems every now and then. If you know what to look for, then you will know when it’s time to give The Electric Connection a call.

If your plug sockets feel hot to the touch, do not use them. Electrical shocks can be life threatening, and you do not want to expose yourself or your family to the possibility of them. If you find yourself experiencing this, call your electrician right away. Hot wires can overheat, leading to electrical fires that can be very hard to control.

If your breakers are tripping frequently or you blow fuses often, then you may want to have an electrician come take a look. Although it is normal for this to happen every now and then, it can signal a much more serious problem if it happens to frequently. If you have to pick and choose which appliances to run at any given time, then you need to have an electrician come and check things out.

As a rule, you should never hesitate in contacting a Burbank electrician whenever you suspect that you may have electrical issues that need attention. Although the cost may deter some, it will cost much less than if it is left unchecked. For more information about electrical issues, or to get in touch with us, visit our website at www.theelectricconnection.com.

Rolling blackouts occur when delivery of electricity from a large power source is intermittently stopped in varying places across a wide area. Rolling blackouts usually occur in tandem with natural disasters or energy crises.

Rolling blackouts prevent large power sources from blacking out completely. They have been implemented in places with a high demand for electricity, such as Japan, the U.S., Pakistan, and Ukraine.

By limiting the amount of power that can be used at one time to only certain areas, power station operators can control the power output from their generators. Should a part of the generator be at risk for failure, operators can begin a rolling blackout to limit the amount of work the generators must do. From there, they can pinpoint the problem areas and find a useful fix without taking away power from an entire area.

Rolling blackouts can prevent power outages from:

In the case of power output problems like station faults, short circuits, and electrical overloads, a rolling blackout can mitigate the risk of explosion and prevent the acceleration of large scale disasters.

Since power can only be distributed over a limited area, 100% of the electricity supply to some places will be temporarily cut off. Household items such as lights, outlets, and appliances will cease operation for a predetermined amount of time. You can gather information about rolling blackouts from the radio or news before they occur.

You should have an emergency kit in your home or business that has the necessary supplies for survival without electricity. Items to include in an emergency kit are:

Be sure to lock all of your doors and windows if possible. In developed countries, law enforcement will bolster its forces to protect areas affected by a rolling blackout. You should still remain safe and prepared whenever possible.

Should a rolling blackout elevate to a blackout, don’t be afraid to use your supplies. Even if electrical generators are running at low capacity, they still have the potential to cause larger problems should they become overloaded. A rolling blackout can quickly become a city-wide blackout.

Rolling blackouts are relatively rare. Conditions must be extreme for a rolling blackout to take effect. While the climate in the U.S. varies widely across the country, devastating natural disasters don’t compromise the electric grid more than once every 20 years.

If you are renovating or updating your kitchen, one common kitchen addition you might be interested is a garbage disposal unit. This little unit sits in your sink and allows you to shred food that you would not normally fit down the drain. This can be a handy appliance, however it may introduce the threat of electrocution into the environment, as water and electricity don’t mix well. If you are looking at having a garbage disposal unit installed in your sink, have one installed safely.

The garbage disposal unit is installed into your existing sink pipe. In order to power the unit, you will require a 120-volt GCFI (ground-fault circuit interrupter). This means that you will need an outlet under your sink to plugin into. If one is not available you will need to have it installed. Often, other appliances may already heavily load kitchen circuits, it is important to check the load on that circuit before installing a new electrical outlet. If you are not careful, every time you run your garbage disposal you could cause the breaker to trip and lose power to your toaster, microwave, or refrigerator.

At times disposal units may need maintenance, become clogged, or break down for some other reason. To identify the problem you may need to open up the sink or motor to get to the part that you need access to. Before you begin any work, shut down the circuit that the garbage disposal is on and unplug the unit. This will not only keep your fingers safe from the motor activating unexpectedly, but it will also help you avoid an electrical related accident. If you start to take apart the pipes and water begins leaking there is a big risk of electrical shock. If you are not familiar with the plumbing or electrical work of the garbage disposal, leave it to a professional. You may think it is a simple job, but one mistake can be costly.

Before having a new garbage disposal installed, inspect your sink and pipes for any leaks. If these leaks make contact with exposed electrical wires or outlets there is risk of electrical shock. If you are not familiar with the plumbing or electrical work involved in installing a garbage disposal unit, call an expert. Our licenced electricians can ensure that your kitchen circuit can handle the unit and install a new electrical outlet.

Electrical conduits are an electrical piping system made of plastic, metal, or fiber, that are used to provide wiring or cable route to protect it. The use, form and installation details for electrical conduits are specified by the wiring regulations such as the US National Electrical Code (NEC) or other national or local code.

The location of an electrical conduit will usually determine what kind of material may be used. Since electrical conduits are used mainly in the outer wall surface in exposed locations, they are made of a material that is either flexible or rigid.

The following are the most commonly used materials:

Rigid steel The type of conduit system that is to be applied depends upon the wall thickness, mechanical stiffness and the material used to make the tubing. The material can be chosen for mechanical protection, corrosion resistance and for cutting the costs on installation charges. As far as wiring regulations for electrical equipment in hazardous areas are concerned, certain kinds of conduits need to be used depending on the regulation specifications.

A hefty amount of our readers here on the MyLEDLightingGuide’s official blog consists of facility managers (along with contractors, government employees, and other decision makers). This post is made specifically for the facility managers and building owners out there to help keep you up to date and fresh on the latest news and opportunities for you and your buildings.

This list of 14 blogs will consist of some popular and most likely already heard of publications, along with a few lesser known places that you still may find extremely interesting. Picking a few from this list is definitely the first step to keeping up to date and staying ahead with your work.

There will be a brief description along with a URL for each blog / magazine listed, and it should give you a good idea or not if that facility management resource will benefit you more-so or not than others listed here. Now, let’s get started with this list…

2. Buildings.com

Another very popular publication which covers a lot of useful topics and products that any building decision maker should be aware of to create a more efficient and overall better workplace. They also have many courses and webinar on topics like life cycle costs, energy management, lighting, security, and more.

4. Maintenance World

As the name suggests, this blog leans on the side of maintenance based topics. Although, they often talk about topics that are important to any facility manager, such as cooling an industrial sized area. That is just a glimpse of the type of stuff this blog publishes, so reading more on what they offer may be important to seeing if this blog is worth your time or not!

6. FM World

FM World seems to put a lot of their attention on news, but all are topics that are probably very relevant to you and your tasks as a FM. They also (like many other of these blogs on this list) offer many different white papers which carry tons of valuable information in them. Along with professional interviews, webinars, and other pieces of content they are very well rounded in the variety of things that they offer.

8. The Built Environment

They don’t only talk about the environment and green buildings, but surprisingly they publish a lot about facility managers and how to become a better one in general. You can thank Michel Theriault for this great resource, as he is the brains behind it all. He also offers services such as consulting and training for FM staff, so if a budget allows and you want to become a better FM; that’s always an option!

10. Building Automation Monthly

Phil Zito is the creator and sole person behind Building Automation Monthly. He writes about and educates on the topics solely regarding building automation systems. No time for reading? Phil offers a Podcast which covers many different great topics as well. So, next time you are driving or taking a flight you might want to listen in to his podcast!

12. The fmguru blog

Although this blog doesn’t seem to be updated as often as many others on this list; their past and current posts are a good read. They are definitely insightful and thought provoking on the tasks and purposes of a facility manager.

14. i-FM.net

Like their headline says, “if you’re in FM, you need to be on i-FM.” They offer tons of content through news, interviews, top 50 list of great and relevant companies, and overall great resources.

Missed any that you think is worthy of being added? Be sure to comment them down below, this list is always being updated!

Final Words

There you have it, 14 (and growing) facility manager blogs, magazines, and resources that will hopefully make you an informed, up to date, and more educated facility manager overall. Our #1 tip for you is to pick two or three from this list that really peak your interest, and make it a ritual to check in on them often for the latest content that they offer.

Again, if we missed one that you think should be added; feel free to comment it down below for consideration!

Want more of our topics for facility managers? Here are some: