Other parts of the country may be warming up and getting ready to use our air conditioners, but we’re still relying on our heaters to get us through more than a few chilly nights. So if yours begins to malfunction, you may start to panic. This is understandable, but know that if you’ve had your system maintained before the heating season began, it may likely not even be an issue with the system itself.

Instead, you may be in need of Newton, MA electrical wiring services for some component of your heater. Keep reading to learn more about how your heater can be impacted by electrical issues.

This applies to both electrical furnaces as well as boilers. Both of these systems use heating elements—a set of coils that burn hot as a current passes through them—in order to raise the temperature of the air (furnaces) or water (boilers).

Both of these systems contain more than one heating element. Therefore, if you one fails you likely won’t lose your heat entirely, but your heater won’t be able to work as efficiently as it otherwise would.

If you’re utilizing a heat pump, then this is the most common electrical problem you might run into. Capacitors are cylindrical devices about the size of a soda can, responsible for sending electrical charges to the motors to start and keep them running.

Capacitors can burn out after years of use, or suffer from wiring issues, causing the heat pump to “hard start” (draining power) or quit functioning all together. You’ll need a professional to replace the damaged electrical capacitors.

Even if you have a heater that runs off of natural gas, oil, propane, or geothermal power, it’s going to have an electrical thermostat controlling it. Thermostats with failing wiring will begin to malfunction, often incorrectly registering your home’s temperature or failing to accurately set the heater. If your heater is failing to reach its target temperature with no other signs of a problem, your thermostat wiring could certainly be to blame.

The start of the new school year for kids means cooler weather is just around the corner! The Farmer’s Almanac is predicting another wicked cold winter, with our area getting cold, wet, and white…yikes!

Since winter is often the time when energy bills are the highest, we thought we’d share a few of our favorite energy saving tips to help keep you comfortable without breaking the bank this season. Keeping your electrical system safe is important, especially when snowstorms threaten to knock out power (and with it, heat!), so read up and remember: for all your electrical service needs in Maryland, Virginia, and Washington, DC, call Kolb Electric!

If you use a heat pump to heat and cool your home, you probably already know that they’re among the most efficient HVAC systems you can install—if you use them correctly.

During the winter, set your thermostat to the lowest setting you’re comfortable with and keep it there for the whole season—the U.S. Department of Energy (DOE) recommends 68 F, but ultimately this is up to you. Every degree you set the thermostat lower will lower your energy use, so if you like to bundle up, this is a great way to save!

Most heat pumps come with a backup heating system to give you a little extra heat if the pump itself can’t make it. Unfortunately, electrical resistance heat is very inefficient and can get expensive if you use it too often. This electrical backup kicks on when you turn your thermostat up, which is why it’s best to set your thermostat once during the winter and then leave it there.

The one time when you should adjust your thermostat is when you’re leaving the house for a few days—the backup heat will kick on when you come back and set it back up, but the amount you save from being gone should offset that.

With any other form of heat, you’re free to adjust the thermostat as needed throughout the day. Again the DOE recommends 68 F as a balance between comfort and efficiency, but you may want to set the thermostat lower during the day when you’re not home and higher when you are home (a programmable thermostat makes this easy!).

If you’re going to be away and want to set the thermostat down, don’t go lower than 55 F. If your home gets too cold, your pipes could freeze and create a very messy situation for you when you return!

Whatever type of heating system you use, make sure you keep your filters fresh all season. Change them about once a month during times of peak heating system use. Just keeping on top of this can save you as much as 10 – 15 percent on your monthly energy bills!

Your water heater is usually the second largest energy consumer in your home, next to your heating system. Saving money on your water heating is not too complicated:

Fix all leaks when they happen! Even what looks like a small leak can waste hundreds of gallons of water per month—all of which you still have to pay for.

Take showers instead of baths. A normal shower uses about half the water of a bath, which also means less water heater needs, lower sewer costs, etc.

Use a flow restrictor to maintain water pressure while minimizing the amount of water use.

Don’t let the hot water run when doing dishes, shaving, or brushing teeth.

Like a heat pump’s backup heater, a space heater uses electrical resistance heat that can be expensive to operate. That said, they can be useful to heat small areas like the bathroom for short periods of time. In fact, it can be much cheaper to use a space heater in the morning than to raise the temperature in the whole house for a short period of time.

Are your customers getting hot under the collar about rising energy costs? If so, suggest they buy a ceiling fan.

Although ceiling fans do consume electricity, experts say the amount of money homeowners can save on air conditioning greatly outweighs the cost of running the fan itself.

“Ceiling fans provide year-round comfort and efficiency,” says Barb Wright, a ceiling fan product manager at Westinghouse Lighting.

Wright says the cost of operating a ceiling fan varies based on how often they’re turned on and how much the electric company charges, but on average, she says a standard ceiling fan costs less to operate than an incandescent light bulb.

Experts say ceiling fans reduce energy in two ways.

First, fans circulate the air in the room, preventing hot air from accumulating at the ceiling.

“A ceiling fan helps equalize the temperature throughout the room, so your air conditioner doesn’t have to work as hard to keep the room cool,” says Scot Wetmore, marketing director at Dan’s Fan City, a ceiling fan retailer with more than 50 stores in the United States.

When people are in the room, Wetmore says ceiling fans have the added benefit of making people feel cooler.

“Ceiling fans cool by evaporation, like a wind chill factor,” he says, adding that fans will make it feel like it’s about 6 degrees cooler in your home than it actually is, allowing you to set your thermostat 6 degrees higher. According to Progress Energy, an energy company that services North and South Carolina and Florida, homeowners can save 7 to 10 percent off their cooling costs for each degree above 78.

And ceiling fans don’t just save money in the summer. Ceiling fans run counterclockwise in the summer, but many ceiling fans are equipped with reverse switches which allow you to run the fan clockwise in the winter, thereby reducing heating bills, too.

“[Changing the direction of the fan] makes the air column go up toward the ceiling, and what it does is it drives air currents up on the ceiling to the wall and down the wall, and that helps redistribute heat from the ceiling. So it helps lower your heating bills by re-circulating the heat,” Wetmore explains.

If a ceiling fan also includes a light fixture, Wright says customers can maximize their energy savings by replacing the incandescent bulbs with compact fluorescent bulbs.

Wright says homeowners should also consider buying Energy Star-rated ceiling fans. “They are about 50 percent more efficient than conventional fan/light units with an estimated energy savings of $15 to $20 per year,” Wright says.

According to the Environmental Protection Agency’s Energy Star Web site, Energy Star-rated ceiling fans move air up to 20 percent more efficiently than conventional models due to advanced blade and motor design, and Energy Star-rated ceiling fans that have light fixtures are about 50 percent more efficient and produce about 75 percent less heat.

Several ceiling fan manufacturers make ceiling fans that meet the government’s Energy Star requirements, including Casablanca, Kichler, Minka Aire and Savoy House.

Click here to shop hundreds of decorative and functional ceiling fans at Capitol Lighting’s 1800lighting.com and start saving on energy today!

Most people have decor and artwork in their homes. While they do know how they want the rest of the lighting in their house to be, they are sometimes at sea as to how they can showcase their art pieces. Most just end up placing picture lights or spot lights above these pieces; however, that doesn’t always flatter the artwork. In fact, sometimes it also takes away from the beauty of it.

Just as you have different type of lighting for different areas in your home, art lighting is a specialised task and needs a certain amount of planning, an eye for detail and creativity. The best way a novice can learn how to get the right kind of lighting for the artwork and decorative pieces in their home is to learn from art galleries.

You must have noticed how impressive the paintings and artwork displayed there look. Light affects different types of artwork in different ways; if you want to bring out its beauty, it’s important that it be lit correctly.

Here are some tips to get you going; you can then mix-and-match and use your own creativity to achieve the look you want in your home:

While these are the basic lighting tips, you would also need to choose the right type of bulbs while planning lighting for artwork in your home:

For more lighting ideas and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263