When you sit in the den to read a good book, you probably want some soft lighting to do so by. You don’t want harsh, bright overheads sending a glaring reflection off of the page back into your eyes. Of course, you could use a lamp to read by. However, we suggest that you speak with a member of our staff about dimmer switches and softer overhead lighting options. That way you can enjoy the convenience of overhead lighting without the headaches – figurative and literal – of harsh reading light.

Cooking a nice dinner for the family can be a fun affair. It can also be rather hectic, with timers going off and sauces to keep an eye on, not to mention the action on the cutting board. If your kitchen is not well-lit, there is no way that you can hope to go about your business safely. Under cabinet lighting and adjustable track lighting can give you what you need to see precisely what you’re doing when working in the kitchen.

Some people forget that lighting can be as much about fashion as it is about function. Illuminating original artworks, photography pieces, or even unique architectural flourishes can be a great way to class up your home. We have the right indoor lighting solutions for any such purposes.

Do you know why your home in Manassas would benefit from whole home surge protection?

You might think it has something to do with lightening. However, the reasons for whole home surge protection are more complicated than you may realize.

In addition to not experiencing a significant number of them in Manassas, did you know that whole home surge protectors can’t stop lightening strikes from damaging your electronics?

At this point, your probably starting to seriously doubt the importance, use or need for whole home surge protection. However, nothing besides a lightening rod and hope can keep your home safe from a lightening strike.

Another point to keep in mind is that whole home surge protection’s primarily function isn’t to protect your electronics and appliances from outside surges. It’s actually intended to protect your electronics and appliances from each other.

When we think of power surges we typically envision lightning strikes and electricity bursts from outside power lines. In reality the majority of surges are short intense shocks created by large appliances such as generators and HVAC motors. These smaller surges typically go undetected and usually don’t blow out the entire circuit.

However, over time, they add up. If you banged your knee in the same spot every day for a year, you might not have any significant damage on the first day, but on day 365 you’d probably have quite the bruise. The same logic applies to your electronics. Those little zaps might not degrade their performance immediately, but the problems are cumulative. Why shorten their expected usefulness and replace your appliances sooner than you have to?

Your generator can literally be a lifesaver during an emergency, providing you with power, light, and heat when a disaster strikes or a blizzard renders your neighborhood powerless. However, in order for it to do its job effectively and efficiently, it has to be ready to go on a moment’s notice.

This means that it should be tested routinely, and repaired when needed. The good news is that if you do need repairs, we are here to help. But in what cases would you need this service? Keep reading for 3 reasons your generator may need repair.

The longer your generator lasts, the more likely it is to spring a leak from a hose, line, or storage pan. The leak may come in the form of oil or fuel depending on what type of generator you have. Or, it may even be the coolant, which is designed to keep the engine block from overheating. If you ever spot any puddles around your generator, give our professionals a call right away.

If generators sit too long without being used, the battery can become drained, and problems can develop with other components of the engine as well. If your generator struggles to start up or if it runs fitfully, then it is time to call for service.

When our technicians come to inspect your generator, we’ll take a close look at the wires, buttons, and other electrical components. If they show any sign of damage, the unit should be repaired. These signs can include frayed wires, loose connectors, buttons that stay stuck when you press them or even overloads that shut the generator down when you need it.

The best way to determine if your generator needs repairs is to schedule annual maintenance, but also to conduct a visual inspection yourself at least every few months. It’s also a good idea to run it for 15-30 minutes to listen and look for any trouble it may seem to have.

As with many things, when we want to save money we decide the best way to do that is to trade our time and do the job on our own instead of paying someone else to do the work.  In many cases, this is very much worth the savings.  Unfortunately it’s rarely the case when it comes to home electrical work.  Some friends may regard home electrical repair as simple and easy.  Some small repairs, such as replacing an outlet or a light socket, can be simple but most of the time you’ll find that repairs to your home’s electrical system are time-consuming, dangerous, and difficult.  So why should you hire a professional?

1. Electricity is Dangerous

This seems like an easy answer.  But in many ways, it’s the reason for the rest of the answers you’ll find below.  Electricity is dangerous if you don’t understand how it works.  But it goes beyond simply remembering to turn off the circuit breaker before working.  You can follow every safety precaution, finish your work, and power things back up without any issues only to find yourself with an unexpected electrical fire a few weeks later.

ESFi states that home electrical fires are responsible for an estimated 51,000 fires each year.  Many of these fires end with homeowner deaths due to a lack of fire safety devices and procedures.  So yes, you can shock or electrocute yourself while working on your homes electronics, but there’s a greater risk of accidentally causing a house fire later on if you don’t follow regulations.

2. Professional Quality

When you hire a professional, you aren’t just paying someone to do the work for you.  A professional will always do a higher quality job because their livelihood depends on it.  Professional electricians pride themselves on their training and expertise which allows them to make quick judgements and quality repairs.  A professional repair or installation means:

Technicians take pride in their work, but they also want you to feel safe while they’re working.  Any fears you may have about people in your home are unfounded with a professional team.  Electricians like those employed at Custom Electrical are bonded and insured to protect your home.

3. Licensed Work

Homes and buildings must follow a very specific set of rules and regulations for proper electrical wiring.  Professional electricians are required to pass certification exams to prove that they’re familiar with NEC rules and regulations.  These regulations are in effect because they promote efficiency and safety for building occupants.  From simple requirements such as mandating number of outlets within a room to safety concerns regarding placement of ground-fault circuit interrupters in garages, bathrooms, and kitchens.  While you may be well aware of how electricity works, you likely aren’t familiar with the requirements of your state for how a building is required to be wired.  This may not seem important now, but if you ever attempt to sell your home, a licensed inspector will notice the shortcuts and the relative value of your home will be less since it needs to be brought back up to code.

For the best in quality electrical repair work and installations, contact the professionals at Custom Electric!  Be sure to check back here each week for helpful advice, news, and guides or follow us on Facebook and Twitter!

Categories: 24 Hour Electrician, Local Electrician, Professional Electrician, Residential« Holiday Lighting Safety Tips!  |  Why You Should Use a Surge Protector »

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.