Making sure that you have a good HVAC system is a top priority for most homeowners throughout the country. The most common type of air conditioning system is the traditional, central AC unit, which used a series of ducts in order to push cool air throughout your home.

There is another type of AC system that can benefit almost any homeowner though: the ductless mini-split air conditioner. When it comes to installing a new system or replacing the air conditioner you already have, there are many reasons to consider a ductless system, which we’ve highlighted below.

To understand the benefits of a ductless cooling system, its first important to understand what it is. As the name suggests, this type of system does not require ductwork in order to heat or cool your home. Instead, a ductless system uses individual, wall-mounted units which circulate air in each different zone or area of your home.

Ductless systems can be quickly installed by a professional air conditioning technician, as they only require a few refrigerant lines and electrical wires that connect them to a central outdoor condensing unit. It’s actually the system’s refrigerant that removes the heat from your home and carries it to the outdoor unit, where it is exhausted outside.

Low Voltage Track and Rail Lighting Systems for 2013

Your Guide to Outstanding Low Voltage Lighting Installation 2013

You cannot beat the versatility and design of innovative low-voltage track and rail lighting systems.  New compositions and energy-efficient options are extraordinary and may be custom-designed to blend seamlessly with changes in your decorative environment.

Far from the industrial-sized straight runs and bulky fixture heads of the past, new track and rail lighting systems are elegant and balanced to beautifully illuminate both traditional and modern settings.

Top 5 Reasons to Update with Low Voltage Lighting Systems

1.  More Economical:  Because low voltage lighting systems function on 12 volts of electricity rather than the standard 120 volts, low voltage lighting uses less energy, and smaller low voltage track heads deliver light more efficiently.

2.  Easy installation: From colorful and vibrant glass pendants to sleek metallic spot light fixtures, track and rail systems are easy to install and maintain. The monorail system is the most basic and easiest to install; consisting of a single line of electrical cable that may be installed in straight runs or custom designed in a unique configuration.

3.  Safer Operation:  Low voltage lighting requires a transformer to “step down” the 120-volt standard to a 12-volt system; and, the reduced 12-volt system eliminates the risk of electrical shock.  Because of the reduced risk of electrical shock and safer operation, low voltage lighting may incur fewer required inspections.

4.  Greater Flexibility:  Unlike other ceiling fixtures where a lighting design in required before you begin construction, low voltage track and rail lighting systems provide the flexibility to update your home lighting design as you can afford. You may choose to do one segment at a time, and add to the design as your needs and budget allow.

5.  Superlative Lighting Designs: Low voltage track heads and light fixtures are available in a myriad of styles and sizes.  They are made to accommodate compact light sources that are as bright as 120-volt bulbs but in a smaller fixture. Most of the bulbs used in low voltage lighting are more than twice as bright as regular incandescent bulbs of the same wattage.

FAQ’s

HOW MUCH WILL IT COST?

-The cost to install low voltage lighting currently runs on average between $150-$220 per fixture.  Material and labor costs vary according to hourly labor wage restrictions, specific project size and the number of fixtures needed.  It is a good idea to get a few estimates before hiring an electrical contractor for your low-voltage lighting installation.  Estimated costs should include all materials, as well as delivery charges for equipment and costs to prepare, protect or repair existing structures. (Permit and inspection fees are usually additional charges that may be involved with certain lighting installations.)

-Low voltage track and rail lights operate on a system equipped with a transformer. Since standard lighting installations run on outlet and junction boxes that provide 120 volts of electricity (in the US and Canada), the transformer serves to “step-down” or decrease the voltage from standard line voltage (120 volts) to low voltage (12 volts).

-Low voltage fixtures, bulbs and dimmers are generally more expensive than line voltage systems due to the transformers that are included as part of the fixture’s electrical construction; Although low voltage installations may be more expensive than line voltage systems, lifetime operating costs are lower due to energy savings and lower maintenance costs.

WHAT TYPE OF LIGHT SOURCE WORKS BEST IN A LOW VOLTAGE TRACK HEAD?

-Although there are some good compact fluorescent lamps that may be used in low voltage track fixtures, halogen bulbs are still the most popular choice.

-Low voltage halogen lamps contain filaments that are shorter and fatter, so the illumination is precise, crisp and luxuriant.  These lamps are available in a variety of beam spreads offering over 20 variations in any given wattage, ranging from super narrow spot lights to full-spectrum flood lights.

-The most common lamps or light sources used in low voltage track heads are PAR 36 and MR 16 halogen light bulbs.

CAN I UPGRADE MY TRACK FIXTURES WITH LED (LIGHT EMITTING DIODE) LAMPS?

-LED (light emitting diode) low voltage lamps are compact solid-state light sources that provide cool focused task light.  LEDs last 10,000-100,000 hours and use very little electricity.  With future production, LED lamps may become more affordable and the standard go-to choice in track and rail systems.  *Rather than a transformer, LED bulbs require a “driver” to convert from standard to low-voltage.

 With a state-of-the art low voltage system, you may custom design formations with imagination and creativity and the possibilities are endless…

-Use straight runs of track to highlight displays in a gallery or down a corridor.

-Make a design statement and provide the perfect task light with hand-painted low voltage pendant lights over kitchen islands, bath vanities or night tables.

-Highlight the sparkle in crystal and provide accent light to an elegantly set table with low voltage rail lighting.

-Expand your space with hand-bendable rail fit to accommodate rooms with limited ceiling space or rooms where electrical junction boxes are  inconveniently located. The beauty of track is that it may be custom measured and easily cut to fit your exact specifications.

*Especially suitable for savvy renovation projects, such as older New York City apartments that may have one junction box in the ceiling:  Track and rail lighting configurations can do it all, providing general, task and accent lighting.

-Track lighting systems are even being used to power residential garage space with functional and inviting illumination; Showcase expensive automobiles and provide excellent task lighting to a workbench or hobby station with streamlined track lighting.

Low Voltage Track Systems from Start to Finish

GETTING ON BOARD: YOUR TRACK  7-STEP SYSTEM

-Although, electrically-speaking, track runs must work as separate units, multiple track and rail layouts may be connected to appear as one system.  An isolating connector is used to power each section.

-A floating canopy connector may be installed anywhere along the track and covers a junction box while providing power to the system.

-A live end connector may be used if you are running wires directly into the track without using a junction box.

-You may also power the system at any connecting point (straight, angled, T-junction, etc.) where the connector has a power feed entry point.

-A junction box may also be used at any of these power entry points; a canopy cover plate should cover the entry points for aesthetic, as well as safety reasons.

Basic guidelines to ensure safety and effortless performance of low voltage track heads:

-Most track and rail systems are installed directly into the ceiling and mounting hardware should be included.

-Systems that are suspended from the ceiling require adaptable suspension hardware.

-Low voltage track heads are made to slide directly onto the track and repositioned easily.  End caps should be included in the installation for a clean finish.

-Low voltage track fixtures may be placed on line voltage track systems by using a track connector with a transformer installed to lower the voltage of the track system.

-Voltage drop:  On longer track runs, you may notice a decrease in brightness the farther away the low-voltage head is located from the transformer.  With remote transformers, voltage drop is dependent on the number of fixtures on a system, the length of track, and the length and gauge of wire from the transformer to the power feed.

– Be sure to mix and match fixtures within the same systems; check for compatibility when trying to interchange fixtures from different track and rail systems.

-PAR bulbs and MR16 low-voltage halogen are available in a variety of beam spreads.  Wide-angle bulbs are great for general illumination; narrow spotlights are good for task and accent lighting.  Track head accessories and special lenses may be added for increased directional and colorful effects.

Track or rail systems allow you to create an original lighting design to perfectly illuminate your home. Capitol Lighting offers track and rail lighting systems, accessories and compatible light fixtures from top brands like LBL Lighting, WAC Lighting, Kichler Lighting, Tech Lighting and Wilmette Lighting.

Top Pics include:

TECH LIGHTING MONORAIL 

Low voltage track and rail systems that twirl, bend and twist are available in choice finishes.

‘

EUROFASE Cable Lighting

Energy-efficient 4-light Design Pro LED Rail Lights from Kichler accommodate installation on the wall or ceiling.  They are fully dimmable and Energy Star-rated.

Industrial-inspired head with proprietary 5.8 watt LED module. It is easily field upgradeable and replaceable similar to a medium-base socket, though it utilizes a dedicated base. The heat sink remains with the fixture minimizing any waste at the end of life. Rotates 360°, pivots 90°.

“Clamps to Wall MonoRail. 18″” long with 3″” high gentle curve. Pivots at head to direct beam. Low-voltage, MR16 lamp of up to 75 watts not included). For Wall MonoRail system only.”

With the latest track and rail lighting innovations, the flexibility to redecorate with light is intrinsic. Adjust your lighting design with ease by adding new track segments or repositioning adjustable fixture heads.  Transform your guest room into a nursery with whimsical designer pendants or upgrade your hallway with sleek metallic low voltage track heads.

Low voltage track and rail lighting fixtures are brilliantly engineered to adapt to modifications in your décor and furniture placement; lighting may be reconfigured and beam spreads refocused to highlight artwork and illuminate your home safely and purposefully to bring out the best in a new design scheme.

Mortgage lenders try to look at the big picture, considering things like taxes and insurance when deciding how much they can loan out to homeowners and buyers. However, there's a major ongoing expense that appraisers currently don't take into account – monthly utility bills. You don't need to be an electrician to understand that the money you pay for power each month makes an impact on your budget and even affects the value of your home. A bill currently in front of Congress – the SAVE Act – would acknowledge that reality and let federal mortgage lenders make energy efficiency part of their formula.

Increasing the Value of Your Home

Essentially, the SAVE Act would make it easier to get financing for efficiency upgrades, even folding funding for it into traditional mortgages.

“This bill would require federal mortgage agencies to recognize the energy efficiency upgrades in a home during the mortgage underwriting process, thereby increasing the value of the home,” President of the Alliance to Save Energy Kateri Callahan said in a statement. 

The SAVE Act claims it would bring a number of benefits in addition to loosening the drawstrings on bank financing for efficiency. Among them:

A Diverse Group of Supporters

The SAVE Act was first introduced in 2013. Although Congress has yet to vote on the measure, it has lined up a diverse group of supporters who aren't typically on the same side of major issues, from the U.S. Chamber of Commerce and the National Association of Manufacturers to the Alliance to Save Energy, the National Resources Defense Council, the U.S. Green Building Council and others.

In the meantime, there are a number of steps you can take around your home today to cut down on your utility bills. If you need any help installing efficient appliances or upgrading your home electric system, contact an expert electrician today.

Air flow is obviously a very big part of forced air systems. Without air flow, the entire system doesn’t work. It’s just producing heat and not sending it anywhere. It is precisely that issue that can cause a great deal of damage to your heating system. There are a couple of different ways that your heating system can be prevented from circulating air, but we’re going to focus on one: the air filter. Let’s take a look at what the air filter does, and how it can create air flow issues that lead to call FB Electrical Services. We provide heating repair throughout Boston.

Someone would think that a bulb is a bulb is a bulb; well that isn’t really the case. Anyone who has bought a light bulb will know that there is a large variety to choose from. These bulbs don’t vary only in terms of their illuminating power, size and application, but in type as well. It can be quite a challenge to choose the right light bulb for your home.

However, it’s important to understand that something which is in vogue need not always be the best solution for your home, your energy bills or even the environment. You should be aware of the different types of bulbs available in the market and what their properties are.

This will help you make a more well-informed choice and will help you save on energy costs too. When you are choosing bulbs for your home the factors you should keep in view are the upfront cost, light output, the settings and fixtures the bulbs can be used in, energy efficiency and how environment-friendly they are.

When it comes to home lighting in Australia, there are 4 different types of bulbs you can choose from. Let’s take a look at their features and how they stand up against each other in terms of efficiency, cost & environment-friendliness. Just as home design trends come and go, so also is there a change in home lighting trends.

The upfront costs for these bulbs are very low (it’s also why they are so popular), but they are expensive to run. These bulbs produce a warm light and are a good option for lesser used areas like a laundry or bathroom. The Government doesn’t really recommend using these for general home lighting as they are inefficient and because their running costs are higher. In fact, the Government is also making every effort to phase out these bulbs. They are doing this by introducing MEPS (minimum energy performance standards) for all lighting products.

These bulbs use tungsten elements and have higher efficiency levels compared to incandescent ones; they are longer lasting too. Unfortunately, there are many disadvantages to halogen lights. Typically, these lights are best used to light smaller areas that require focused lighting. However, most people tend to use them to light larger spaces and they end up consuming much more electricity than they should. The Government is phasing out certain types of halogen lights too.

These are a very popular choice and many homeowners use them. They are energy-efficient, have a lifespan that’s 4-10 times longer than that of any incandescent bulb and are available in cool/neutral/warm tones. They are more expensive than incandescent bulbs, but are far cheaper to run in the long term.

Today, these are proving to be a highly efficient alternative to CFLs or incandescent bulbs. Their initial cost is significantly higher, but they offer 80% energy efficiency and last for a number of years. Since they last for so long, they are easy to maintain and are a good home lighting choice.

For any additional information about the different types of bulbs and advice on which type will be best suited for your usage and home, call Allround Electrical at 1300 169 263 and speak with our experts. We can provide you the best electrical solutions at the most reasonable pricing. You can also drop us a line via email or use this contact form and we will revert without delay.

Thanks for reading,1300 169 263