Are you still struggling to lower your electric bill? Maybe you have made a conscious effort to turn off lights and shorten your showers and you are not seeing that big of a difference. There is more you can do that will not change the way you go about your daily routine. It is by reducing your phantom power usage. What is phantom power, you ask? An electrician in Glendale, like those at The Electric Connection is here to explain what phantom power is and why it is costing you money every month.

Phantom power is the electricity that is used by anything that is plugged in. Your toaster, your cell phone charger and even your television are all pulling a small current even when they are not powered on. Just because you shut off your television, it doesn’t mean it isn’t using electricity. To reduce phantom power, you will need to unplug things that you are not using. When you leave for work in the morning or before you go to bed at night, unplug anything you won’t be using. You may discover you don’t use your toaster for a week.

Phantom power isn’t costing you a ton of money, but when you reduce the amount of phantom power you are pulling, you can help add to the savings you have already implemented. By combining your phantom power reduction, limiting the lights and taking shorter showers, you can save more than 20 dollars a month on your Glendale electrical bill. As you know, every dollar saved counts. You can help make reducing your phantom power a little easier by using power strips in areas where there are several items that are plugged in, like your entertainment area or computer area. Unplugging a single power strip is much easier than unplugging numerous devices. If you have any questions about phantom power or would like to learn more about energy savings, give The Electric Connection a call today.

Any building, in any industry, in any area of the world, is susceptible to having potentially hazardous and radioactive exit signs installed throughout their building.

This could mean they are in schools, near your office, or anywhere else where a radioactive setting probably isn’t a desired situation to be in.

This is why we thought it was necessary to create this post to help and guide you towards identifying, removing, and finally replacing your radioactive exit signs with new signs that are much safer and even efficient, saving you money over other alternatives.

Firstly before we can remove and replace these seemingly nuclear exit signs, you have to be able to identify if you have them or not. But before that, lets explain what exactly makes these exit signs radioactive.

How are some exit signs radioactive?

Just the same way as some exit signs are safe, it is all in the way they are built. For some reason, whether it be technology of the time or something else, people assumed it was a good idea to create exit signs with Tritium, also known as 3H or H-3. Tritium is a radioactive isotope of hydrogen, causing exit signs made with this to be radioactive by default. The only seemingly positive upside to these exit signs is that they are non-electrical, meaning they won’t rack up anything in electricity bills.

But before you become alarmed with what we have shared with you so far, tritium emits only a low-energy beta radiation, which in turn causes the sealed glass tube it is in to glow (causing the exit sign to give off the illumination it requires). Thankfully, it is rather well known that this type of radiation can hardly (if at all) penetrate a piece of paper or clothing. So while yes it is a very low level (energy wise) type of radiation, the fact that there are alternatives that will remove radiation entirely from your building is all the reason to uninstall your tritium exit signs and replace them with something more safe, like LED exit signs.

Now that you understand the technology and how tritium in exit signs work a little bit more, let’s go over how exactly you can identify whether or not you have these types of exit signs in your building.

Identifying a radioactive exit sign should be fairly easy. All of these signs are required to have some sort of “Caution of Radioactive Material” warning on the fixture.

If you do find such a warning label, it is safe to say your light is made of tritium. Another tell-tale sign is whether or not your signs are connected to an electrical source or not as tritium signs do not require any such connection.

Once you’ve identified if you have a tritium exit sign or not, if you do happen to have one, you may continue on to removing and replacing it with the alternative exit sign, LED.

As with any lighting fixture, we recommend to bring in a professional contractor to do the job. But as a general guideline, you can typically recycle your tritium signs by returning them to the manufacturer or place of purchase.

If you purchased the building with them pre-installed and are unsure of where they came from after inspection of the signs for any brand markings, you can try two things:

1: Try contacting the previous building owner or collect records of where they were manufactured

2: Recycle them with a third party. like these), buying them, then installing them yourself or with a professional (we recommend a professional).

Here are a few things you should remember and keep in mind when dealing with a building that has radioactive exit signs:

Since 1989 approximately 1 billion feet of CSST gas line or yellow gas line has been installed.  Nearby lighting strikes can cause an electrical surge and puncture the CSST line.  Bonding is considered electrical work and should only be performed by a qualified electrician.

In new construction we bond all gas lines.  Currently about 500,000 new homes per year have CSST gas line installed in them.  However, CSST gas line is considered safe when properly installed in your home.  Part of the installed properly guidelines refers to bonding your CSST gas line, your local electrician can do this for you.  If your home is more than two years old we recommended you have a licensed electrician check for proper gas line bonding.  Many real estate transactions and inspections require the CSST line to be bonded prior to the sale.   A good source of information on CSST lines can be found at CSSTSafety.com.

“CSST should NOT be confused with flexible gas appliance connectors – the product that joins a moveable appliance to your home or building’s gas supply line. The difference is flexible connectors attach directly to the moveable appliance from the wall or floor. CSST is usually routed beneath, through and alongside floor joists in your basement, inside interior wall cavities and on top of ceiling joists in attic spaces.” CSST Safety.com

If you would like more information or to check to see if your CSST line is properly bonded please feel free to Contact us anytime!  We bond CSST gas lines in the Des Moines area and surrounding communities.

With the arrival of spring and the inviting weather it brings, you may want to spend more time outside, especially after having been cooped up all winter long. While it’s not yet warm enough to jump in the pool, there are numerous other ways to enjoy a pleasant evening with friends and family in your back or front yard. Without the proper outdoor lighting, though, come nightfall all the fun will have to stop. Because of your limited sight, you run the risk of hurting yourself and others. Whether you’re barbecuing, roasting marshmallows, watching your kids jump on the trampoline, or gazing up at a meteor shower, make sure you have the right lighting to maximize your experience! Check out these __ reasons to install adequate outdoor lighting.

Before you install lighting, consider how you use your outdoor space. For example, if you have a patio, deck or pool area, consider installing zoned lighting, which highlights a designated area. You’ll also want to illuminate areas such as your driveway, garage, sidewalk and entry way. All of these areas are important to light to ensure safe navigation and prevent a trip to the emergency room. Without proper lighting, one could trip over a hidden step, fall off the deck or worse – overcook the meat!

The more light the better. By installing the right fixtures in the right locations, you’ll eliminate all the scary spaces, increasing safety and peace of mind, not to mention guests will be able to find your house with ease. Illuminating your outdoor spaces will allow you to get the most of your day, and since the weather is only going to get warmer from here on out, we have a feeling you’ll want to be outside as much as you can!

When you add flood lights to your back patio, deck or front lawn, you’ll be able take full advantage of these spaces. Instead of having to go inside when dusk comes, you’ll be able to relax with your friends and family outside for as long as you like.  You could even enjoy a nice dinner around the patio table.

A well-lit yard and landscape deters unwanted guests from coming onto your property.  There are numerous types of lights you can install to increase home security:

Many homeowners make the mistake of adding security lights to the front of the home while ignoring the back. The back of your home can be one of the most vulnerable places because of fencing, so make sure you install lighting in this area as well. When deciding where to install your outdoor lighting, determine the darkest areas of your home as well as any places where an intruder could enter.

Your home is one of your most prized possessions. When you’ve spent countless hours perfecting the exterior of your home as well as your lawn and garden, why allow it to go unseen when nighttime comes? You can highlight the best features of your home by installing uplights, garden lighting and low voltage exterior lighting around your trees and shrubs. Not only will the perfect lights add appeal to your home, it will add an undeniable sense of warmth too. Friends, neighbors and passersby won’t be able to stop themselves from glancing at your home each time they walk or drive by it.