Damaged wiring, DIY repairs and faulty installations are all common electrical mistakes which if not corrected in time can be hazardous and lead to short circuits, injury and electrical fires. If you encounter any of these 7 mistakes in your house, fix them immediately as they pose a serious risk to life and property.

When you think of caring for your home, you don’t often think about the electrical system unless something is going wrong. With an electrical system, when things go wrong, they often go very wrong. You don’t want to lose your home to an electrical fire or even a life due to not having the knowledge you need to safely complete an electrical project or upgrade. That’s why you need your local electrician in Gladewater for any electrical projects you have around the house. But we truly cannot stress it enough that electrical work is not a do-it-yourself project, and to prove our point (and to keep you safe), keep reading in order to to learn the top five reasons that residential electrical work is not a do-it-yourself project.

While changing out things like light switches may seem like simple tasks around the house, and arguably they are, you’re still exposing yourself to bare wires that carry an electrical current. The average American home runs on 120 volts AC. While a quick zap from accidentally touching a bare wire will probably not be enough to kill you, you could easily be gravely injured. Low amperages can easily kill someone and amps vary widely. Additionally, if you accidentally hold onto a wire with a normal voltage, for any number of reasons, this could also kill you. The number one most important thing when dealing with electricity is safety. A professional electrician knows many of the proper techniques and processes in order to perform a variety of electrical services safely.

Like any other home project, there are some electrical projects that you can easily completed with a screwdriver or hammer, and there are others that require very specialized tools in order to complete the job properly. In fact, buying the tools to do the job may cost you substantially more than hiring a local electrician in order to complete it. Tools like a multimeter, insulated hand tools, wire striping or crimping tools, and fish poles or tapes are all essential tools for most electrical services. The costs can easily add up, especially if you just have a small project or two that you need completed.

Along with saving yourself the money associated with buying specialized tools you may only attempt to use once or twice, there are several other factors that can save you both time and money. You could spend hours trying to solve and repair a problem that would take a trained electrician a fraction of the time. Also, you may incorrectly estimate the amount of materials you need to complete the project, which can cause additional incurred costs. Lastly, you can’t get the same prices on materials that contractors can, which just increases your overall costs.

You may be great at following a manual, step-by-step guide, or YouTube video for a standard electrical repair or upgrade, but in older homes, standard is rarely the case. In fact, many older homes have wiring layouts that are anything but standard. Trying to find where wiring runs for an outlet that connects to a lightswitch may not be as easy as it sounds. This creative wiring will be tackled the quickest by a professional with the right level of experience, not by yourself when you don’t know what to expect.

Electrical work also involves keeping your home up to code for safety and for resale value. Most everyday individuals don’t have a clue what building codes are and what is required in order to keep home wiring adherent to code. That’s where your local, licensed electrician comes in. They are educated in how to keep your home up to code and the most affordable, safe ways in which to do so. If you own an older home, you may run into a situation where you need to upgrade the wiring to keep your home up to code. This can easily get expensive and complicated, but is well worth the hassle in order to protect your home, family, and investment.

With the cool nights upon us, you have probably pulled out the space heater already. Maybe you get chilled when you are at your desk or sitting in your favorite chair. Sometimes, you just need a little concentrated heat blowing on you to take that chill off. Space heaters are an excellent option when you need extra heat in a room or don’t want to turn on the furnace for a little bit. However, there are some things you should know about space heater safety. Your electrician in Pasadena has some tips to make sure you are using your space heater safely. If you have any more questions about what you should be doing, give The Electric Connection a call today.

Before you plug your heater in, give it a quick inspection. Make sure mice didn’t chew the cord while you had it stored away over the summer. Any type of damage to the cord is a problem that should be looked at by an electrician. Pasadena residents can skip the electrical repair and buy a new one, which is often more cost effective. Wrapping a damaged cord with electrical tape is not always a good idea. It is better to be safe than take chances.

When you are placing your heater for usage, make sure you leave at least 3 feet between the heater and any furniture, the walls or drapes. Run the cord along a wall and out of direct foot traffic. If you don’t have an outlet near the area you need the heater, consider having one installed by a Pasadena electrician. You can use an extension cord, but you will want to make sure the cord is not run across a pathway either. You don’t want the cord becoming loose and it possibly sparking against the carpet. Give The Electric Connection a call today if you need an outlet installed or have any additional questions.

Fun Fact:  “To talk turkey,” means to speak candidly, directly, plainly and/or bluntly. There are several possible explanations to the origin of this phrase.  Some support a link to uncensored familial conversation around the Thanksgiving dinner table; Others say the phrase is linked to the actual sounds a turkey makes, because the male turkey’s “gobble, gobble” is a basic, unadorned, matter-of-fact kind of vocalization.

Wherever your holiday “turkey talk” may lead, Capitol Lighting’s Thanksgiving feast is sure to please everyone with custom designed lighting at unbeatable prices.  The lighting experts at Capitol will help you to illuminate your home for the holidays…elegantly, efficiently and affordably.

A little light goes a long way to bring charm and soothing illumination to the home environment.  Crystal mini chandeliers, mini table lamps, and other mini lighting fixtures create the stylized finish to designer decorated home interiors.  Feast your eyes on Capitol Lighting’s most outstanding selection of the season!

Add to your Thanksgiving holiday with the latest lighting designs from American Brass and Crystal Lighting.  Capitol Lighting invites you to take advantage of promotional pricing on ABC’s masterful works of art, including mini table lamps and crystal mini chandeliers available in a myriad of finishes including Antique Pewter, White Nickel and True Brass with crystal options ranging from Golden Teak Strass Teardrops to colorful Strass pendoloques.

Give Thanks for the Little Things

Capitol Lighting Highlights the “Mini Strass”

Warm up the room.  Instantly create elegance. Provide your home with charm! The mini chandelier has become an increasingly popular lighting fixture and accessory in home decorating schemes due to its versatility and small size. With extraordinary styling and imaginative design motifs, mini table lamps, too, are gracing more homes than ever.

Capitol Lighting’s Top 5 “Mini Must-dos” for a Superb Finish

To view the latest in home lighting and accessories and for more designing ways to put the mini on your menu this Thanksgiving, visit with the lighting professionals at Capitol Lighting.

Enjoy designer discounts on the best from American Brass and Crystal Lighting available this week at Capitol.

American Brass & Crystal (ABC Lighting) has built a reputation as one of the premier manufacturers of the finest quality cast brass and crystal mini chandeliers. All crystal chandelier and cast brass frames are molded in Italian casts by some of the finest metal craftsman in Europe and are then adorned with genuine Strass crystal from Swarovski. Each crystal mini chandelier from American Brass & Crystal Lighting is available in any of their 17 custom finishes and a multitude of different crystal grades, shapes and colors.

Visit a Capitol Lighting showroom or shop on-line at 1800lighting.com to custom designs your holiday illumination.  Enjoy promotional values on the latest mini lighting fashions from ABC.  The options abound; with American Brass & Crystal you create a design in a crystal chandelier that is uniquely your own and each one is hand made by American artisans with meticulous care.