Fluorescent ballasts are used in many industrial warehouses as they offer cheap and efficient lighting. These ballasts can last decades but depending on the type of environment (extreme cold/extreme heat), may be subject to a shorter lifespan. Check your ballast fixtures for these warning signs to see if it is time for a ballast replacement.

There are several signs that can indicate to you that it is time to replace your ballast these include:

If your ballast fixtures have any of these signs, it could mean that they are in need of replacement. Before scheduling and planning to have your ballasts replace, replace the bulbs with brand new bulbs. At times issues can relate to a specific bulb and not the ballast, giving off false symptoms.

For many handy people, they will feel confident in replacing a ballast themselves. If you are replacing a ballast yourself, please use the proper protective equipment and ensure that all power to the ballast is turned off to prevent electrocution. As part of the ballast replacement you will be required to cut and rewire the electrical wires. This can be technical and a mistake in the process can result in damage to the new fixture, bulbs, and possible electrocution. If you are not comfortable or knowledgeable with the process of ballast replacement, we would highly recommend that you contact a licenced electrician to complete the installation for you. This way you can be sure you will be left with a working ballast that is correctly installed and safe.

If your workplace, garage, or home is in need of ballast replacements, contact Expert Electric at 604-681-8338. One of our licensed electricians can help to diagnose the issues being experienced and bring everything back to working condition.

Ever noticed a slight spark when you plug in an appliance? Maybe a bittle blue zip of electricity with a hair dryer, or a hand blender. If you’re not especially technology-savvy, this phenomena may give you a little fright! After all, when it comes to electrical appliances, wiring or equipment, everyone understand that when the sparks start to fly, it can be scary. So what causes a sparking outlet? Is it normal? Is it dangerous? Answers to questions like these and much more follow!

At Kolb Electric, we understand outlets to a tee. Allow us a moment of your time to teach you about outlet sparking, it’s causes, and when it’s time to be concerned!

To understand sparking and its causes, it’s important to know a little bit about how an outlet operates. You can essentially think of an outlet as a supply line, doling out the electricity allotted to your home in measured quantities per-circuit. In the United States, our outlets run a high, fast and hot current of around 115 to 240 volts.

The important thing to know about sparking is that in actuality, it always happens when you plug in an appliance. That fast, hot current floods the plug at the moment of contact, and for a split-second the connection is being established. This forms a spark! It’s just that normally, you either don’t see it, or it doesn’t persist.

As an important note, we at Kolb would like to say that any time you feel threatened or concerned about your electricity, contact a professional or the fire department. We don’t want to see you in dire straits, and assisting you is what electricians like us are here for!

Having said that, generally speaking, sparking outlets are a cause for concern if:

To prevent issues like these from arising, keep an eye on your outlets. If they get old (even five years can be reason to have them checked), consider having them replaced or serviced. As years wear on, the connections can loosen, causing arcing and large sparks. If your outlets are located near possible sources of water, have GFCIs (Ground Fault Circuit Interrupter) installed for added safety.

At Kolb, our primary goal is always the safety and satisfaction of our consumers. You guys are important to us, and if we can help keep you safe, you can be sure we want to do all we can! Call on our master electricians today if you have any concerns regarding a sparking outlet, or if you have any other electrical concerns!

Did you know that your outdoor lighting installation needs maintenance every once in a while? It’s true! To keep your outdoor lights shining bright, there are a few things you should master.

Whether you’ve already got a bunch of outdoor lighting or if you’re a first-timer, there is plenty to learn in this checklist. And it’s really quick and easy, too!

Check Exterior Bulbs

The biggest headache for a homeowner is a bunch of burnt out bulbs. If you’re not prepared, it can really eat up time to get the right bulbs. But the solution here is to be prepared! When you first get your outdoor lighting installation, be sure to write down the bulb type for the fixture, and go grab some spares for later use.

After that, it’s all about anticipating need. But how can you tell if a bulb is about to blow out? There are some easy tells! Your bulb is close to bringing out if:

Keeping an eye out for these issues can be a huge time saver, and ensures your bulbs burn beautifully all year long. Just do a quick walk around once a week to check for these common signs!

Check Your Outdoor Lighting Wiring

During your light bulb check, do a quick look over for your wiring. If there are cuts, cracks, or missing bits of wiring, get them replaced with the help of a professional! Faulty wiring can be pretty dangerous when left alone, particularly if it gets damp or if the wiring is coming into contact with flammable materials. Damage is easy to spot, so as long as you’re looking for it, you’re gonna find it.

And that’s pretty much it! Any other issues should be handled by a professional for safety reasons, but these two things are the most common causes for exterior lighting failure. Feeling more confident about an outdoor lighting installation now? Contact the certified electricians at Kolb Electric to learn more about how outdoor lighting can benefit your home!