Working with thousands of homeowners as a Top Dallas Electrician, ElectricMan Inc. has taken part in just about every home improvement project you can think up. Unfortunately, many homeowners’ plans for their dream home makeover have been put on hold due to a lack of funds. Fortunately, there are things that you can do to perform an Affordable Home Makeover for a lot less than you might think.

By far, the most dramatic way to change the look and feel of your home, without a complete makeover, is by simply changing the way it shines! The lighting in your home plays a huge role in the first impression that you get when you walk into a room, and can be one of the major determining factors in setting the ambiance and overall feel of the room. By installing the proper recessed lights and pendant lights, along with chandeliers in your home, you will be able to accent the existing décor you already have.

Recessed can lighting will clean up your ceiling and do away with unsightly light fixtures installed everywhere.  When installing a recessed can, the type of trim is essential to maximizing the amount of light that you can get in an area.  A baffled or recessed trim will create a spotlight effect, whereas a flush mount trim allows the light to start at the ceiling and move throughout the room.  This gives a much more even look upon finished product.  Any electrician that has done a lot of installations should be able to guide you in the proper direction so that the style of lighting that you are looking for will be achieved.  Be careful attempting these by yourself, drywall will need to be cut for installation, and you never know where a wire or plumbing pipe may be hiding.

Pendant lighting is also making a big hit right now.  This type of lighting can be used to decoratively light up kitchen islands and kitchen bar-type counters.  This is a creative way to separate your kitchen from your living room.  Typically, homes are not pre-wired for these lights, and wiring will have to be added before they can be installed.  We highly suggest when wiring for these lights, that a new switch leg be installed for independent control.  As always, installing new wiring to your existing electrical should be done by a top Dallas electrician.

Depending upon your tastes in furniture, replacing a living room of furniture can cost ten or twenty thousand dollars! Updating the lighting in the same room can drastically change the look and feel of the room, often for less than one thousand dollars. Replacing lamps and old fixtures with recessed can lighting and a classy chandelier can transform a dim dreary space into a room that you can be proud of. Switch out the chandelier with a nice ceiling fan that compliments the room, and you can even do your part in going green with the energy savings that come with using a fan to circulate the air in your home instead of relying constantly on your energy hogging air conditioning system!

If you need some help in creating your own Affordable Home Makeover by replacing the out of date lighting in your home, contact Top Dallas Electrician, ElectricMan Inc. to discuss the options available to upgrade your home. Feel free to contact ElectricMan Inc. by phone at 972-792-7270, or through the contact form on our website at www.electricmaninc.com.

If you have recently purchased or inherited a home, you may be excited to move in and start your new life. Before you do, take a few moments to consider the safety of the home. If it is an older home, it may need some work done to bring the home up to code. An electrician in Santa Monica will need to do an inspection to evaluate the current status of the electrical wiring. From there, you will know what needs to be done to make your home safe and insurable. The team at The Electric Connection has the electrician you need to make this happen quickly.

Recently, the US Fire Administration released some alarming statistics about home fires in the United States. These statistics are based on 2012 numbers.

• Home fires caused more than $5.7 billion in damages • 14 percent of all home fires were caused by heating equipment (2011 statistic)

When you look at these figures, it is alarming. We depend a great deal on electricity. We don’t want to live without it. You don’t have to. It is about learning to be safe and making sure your Santa Monica electrical work is up to code. Electrical wiring is constantly evolving and being made safer. If your home is more than 50 years old, you probably need an upgrade if it hasn’t been done in the past 10 to 20 years.

Do what you can to make your home as safe as possible by calling an electrician to complete an inspection. Sadly, homes that have had an unlicensed electrician do the electrical work may not be eligible for a homeowner’s insurance payout in the event there is a fire. Don’t risk it! Give The Electric Connection a call today and schedule your electrical safety inspection.

Indoor Generator Provides 20,000 Watts of Stored Renewable Energy to a Ranch Home, Even When All External Power Supply is Unavailable

Dallas, TX  December 30, 2011– Doug Kerr is the proud owner of a stretch of land located in the rural area of Kaufman County (Texas) where the air is fresh and the hustle and bustle of city life is non-existent. One thing Doug’s land doesn’t have, however, is a city power grid. Traditionally, to gain access to power in an area that hasn’t already been included on the electrical grid, you can pay the local electrical provider a large sum to run new electrical service to your location, or be forced to use noisy, polluting, and high-maintenance fuel-powered generators.

Fortunately, Doug found a much better option when he called ElectricMan Inc., a local Dallas and Plano electrician. ElectricMan Inc. is the exclusive North Texas provider of the Indoor Generator, a system that utilizes the latest technology in power storage, partnered with reliable renewable energy options to pioneer electrical independence not only for off-grid applications, but any residence or business that could benefit from more reliable electrical service and lower electrical costs.

Using a vertical access wind turbine, ElectricMan Inc. takes advantage of the abundant wind rolling across Doug’s land, from any direction, to provide a consistent source of electricity for the custom-built Indoor Generator unit installed in his home. The Indoor Generator system itself contains 20 maintenance-free deep-cell AGM batteries capable of storing 20,000 watts of on-demand power—enough electricity to run the household for an entire week or two, even if the wind doesn’t blow at all.

Keeping in mind that no matter how reliable your system is, a backup power plan is always important. The Indoor Generator is also compatible with an external gas powered generator that will run and charge the system at the same time in the event of an emergency, or the unlikely case that the wind doesn’t blow for an extended period of time. This is where the innovative versatility of the system makes it uniquely capable to reliably power a home. With thousands of programmable commands, the Indoor Generator has the capability to utilize multiple incoming power sources, and automatically switch between options such as grid power if it is available, stored battery power, wind turbines, solar panels, or a gas-powered generator, dependent upon what option is readily available and efficient.

The innovations that are integrated into the Indoor Generator system now give any home or business access to a constant supply of clean power, increasing safety, security, and longevity of electrical systems and appliances, while providing the opportunity for electrical independence to anyone.

About ElectricMan Inc.

ElectricMan Inc. is a licensed Dallas and Plano electrician serving the Dallas/Fort Worth area with 27 years of experience in electrical repair and installation, offering fast 24-hour service for residential and commercial needs. ElectricMan Inc. is now offering state-of-the-art backup power systems that exceed current emergency power standards while also providing a homeowner or business owner with the ability to have multiple options for emergency power, as well as the option to switch to the most efficient power supply available during normal usage to reduce energy costs in the long run. Call ElectricMan Inc. today at 972-792-7270 for a free quote on your next electrical project!

Garbage disposals have really changed the way we cook and clean. They make things a lot more convenient—until they clog up. And if you’ve got a lot of guests coming over for Thanksgiving or throughout the holiday season, there are a lot more opportunities for your garbage disposal to jam up, or for food that didn’t belong in the disposal to clog up your drains.

Make sure that your family members are aware of what items do or do not belong in the garbage disposal. Keep your pipes clear for the holidays by doing your best to keep these items out of the garbage disposal.

We hope that most of your guests already know this, but it’s certainly worth a reminder for all of the kids enjoying Turkey Day with you. Make sure they know that plastic wrappers, twist ties, and other small pieces of trash always go into the garbage!

That includes big things like meat bones, but also popcorn kernels, seeds, fruit pits, corn cobs, and more. It’s easy to dump the entire plate into the sink without really thinking about what’s on it, but make sure hard food items do not jam up the garbage disposal motor.

Fibrous, or stringy, foods can wrap around garbage disposal’s impellers and cause the motor to jam. This includes foods and food items like corn husks, celery, and onion skins. We recommend throwing these items into the trash instead.

Fats, oils, and grease are infamously known as FOG in the plumbing world. These substances seem to be harmless, unless you know about their properties. FOG can clog up the drains easily because it solidifies as it cools. Although you may pour it into the drains as a liquid, it clumps into a gooey mess in the drains. It could cause problems for the disposal as well.

Make sure to leave out a separate container to store FOG while you’re cooking, like a recently-opened can. Or, put tinfoil in a mug and pour it in there. Toss it in the trash once it cools.