LED fixtures, such as

With energy consumption that is less than half of what 150-watt LED parking lot light that is a direct replacement for 400-watt metal-halide (MH) fixtures. That’s 250 watts less for the same amount of light!

The average price of electricity per kilowatt-hour (kWh) is 12 cents. To figure out the monthly cost of running 25 LED parking lot lights for 11 hours per day, use this formula: (combined wattage x monthly hours of use)/1,000 x price per kWh. For 25 LED lights, (3,750 x 330)/1,000 x .12) the total would be $148.50 per month or $1,782 per year.

When the same formula is used for 400-watt MH fixtures, the monthly cost is $396, and yearly cost would be $4,752. So, in this situation, switching to LED fixtures would save approximately $3,000 per year. When coupled with the savings on maintenance, LED fixtures can save $6,470 per year. At that rate, the cost of 25 $340 LED fixtures would be recouped within two years.

Left: LED wall packs; Right: HID wall packs

Unlike LED fixtures that light up instantly, HID parking lot lights require a warmup period of up to 10 minutes before they reach full brightness. They also can’t be turned immediately back on after being switched off; this is called restrike time, and it can take up to 15 minutes before they can be turned on again. Attempting to power on the lights before the bulbs have cooled can damage a fixture’s components and cause the HID bulb to fail sooner.

HID lamps consist of a ballast and a quartz tube that contains gas, metal salts, and two tungsten electrodes. In order to create light, an electric arc passes from one electrode to the other through a gas (most commonly mercury, metal halide, or sodium). The mercury used in this process is dangerous if enough is inhaled or released into the environment. If an HID bulb bursts, all contents should be put into a sealed container or sealed bag and taken to a recycling center or hazardous waste facility. If HID fixtures are used indoors, wall packs and canopy lights, are used indoors, the possibility of ultraviolet (UV) radiation exposure should be taken into consideration. HID bulbs emit a substantial amount of UV radiation, but an outer glass envelope prevents the radiation from escaping. However—according to the FDA—”If the outer bulb breaks and the inner tube continues to operate unshielded, intense UV radiation is emitted. UV exposure at this level can cause eye and skin burns, as well as blurred or double vision, headaches, and nausea.” The UV light from an HID bulb with a broken envelope can also lead to discoloration of items and fabric. LEDs emit little to no UV radiation.

In short, LED lights are a better alternative to HID parking lot lights. They offer a great deal in the way of savings, longevity, maintenance reduction, brightness, color, and safety. While it may take a short amount of time to recoup the price of switching to LEDs, all of their qualities make it easy to see why so many businesses have started the process.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

The hot water heater represents one of the greatest hazards in the modern home, yet far too many homeowners have never read their heater’s owner’s manual. Common dangers associated with these household appliances include severe burns from scalding water, electric shock hazards, explosions, and fire.

Because most water heaters reside in closets, basements and garages, and are for the most part hidden from our daily lives, many aren’t as aware as they should be of the maintenance and precautions which are necessary for safety. Many homeowners don’t know, for instance, that they should drain and flush a hot water heater every six months, to prevent sediment buildup. Others are unaware that hydrogen gas can build up inside electrically heated hot water systems when they remain inactive for two weeks or more. Hydrogen buildup requires carefully performed procedures to safely remove this flammable gas from hot water pipes. Many don’t know how and why water softening systems shorten the lives of water heaters, or that every electric hot water heater should be properly grounded with the correct gauge of copper wire.

Correct safety and maintenance measures covered in a water heater’s manual are extremely important for household safety, so every homeowner should study this to learn how to properly maintain their hot water systems. It’s also extremely important to understand the electrical dangers these appliances represent. Because a hot water heater contains electrical heating elements immersed in water, these elements can deteriorate with age and short out electrically to the water heater’s metal casing. When this happens, it’s possible to receive a severe and perhaps fatal shock when touching the hot water heater’s housing or connecting pipes. If you do not have the necessary skills to work safely around high voltage electrical conditions, you should always call a professional electrician any time you suspect a problem with your hot water heater or when you have any other electrical concerns.

When any questions about electrical safety arise, please call Bryant Electric Service at 512-402-8587. Our electricians are trained and equipped to identify any type of hazardous electrical condition, and to determine the proper repair procedures.

Besides just having light, light layering (having multiple light sources for different purposes) is the most important, all-encompassing rule in home lighting design.

I recently ran across a post on Image via Freshome.com

That’s not just one, not two, but five different light sources, not counting the ample ambient light coming in from the windows. You have under cabinet lights on the left, recessed accent lights on the back wall, a pendant light, a table lamp, and linear accent lights atop the window.

On the other side of the room, there are just as many layers:

So there you have it. The most universal rule in residential lighting design, and a few ways to make it your own. What’s your favorite light layer in this space?

A frayed refrigerator plug can easily be classified as a very serious risk, both to the fridge itself, and to your entire home. Frayed, ripped, or otherwise damaged cords are a potential source of electrical fire, arcing and power failure. So, what do you do when you discover a frayed plug on your appliances?

Put simply, get it repaired! Often, replacements are available, but are very costly, and occasionally entirely unavailable depending on the age and model of your fridge.

We never endorse “Do It Yourself” solutions to any electrical issues, as electricity is fickle and extremely dangerous. A wrong move can cost you more than a busted appliance, it can cost you your health (or some serious money in fire damage repair to your home). Leave electrical work to Kolb Electric electricians! That said, we do believe in informed consumers, and thus have detailed our professional process for frayed or damaged plug repair.

Too often we encounter electrical incidents at home that could have been avoided with proper precaution and a timely replacement or repair. Don’t allow your home to harbor risks by leaving damaged plugs alone! Leaving damage untreated can lead to:

To address frayed, or damaged plugs we:

Be ready for any eventuality with our electrical repair services! Contact our experts today to learn more about our electrical services, or to schedule an appointment.