All bathroom spaces have high levels of humidity and moisture and this is unavoidable. However, if the moisture is allowed to linger in the air for a very long time without being vented out of the space, it can result in mould and mildew growth on the grouting, the drywall structure as well as along the window ceilings and air conditioning ducts and can damage other aspects of your home’s structure as well.

In some cases, water damage may also occur which can become expensive to fix. That is why every bathroom in your home or commercial property should have an exhaust fan installation to suck out the moisture from the air and release it outside the structure. This may seem like an easy job and DIY enthusiasts sometimes feel, it’s a job they would be able to manage themselves.

But the fact is it’s never a good idea to play with electricity. Even something as seemingly simple as an exhaust fan installation can pose the risk of electrocution or death when handled incorrectly. The bathroom exhaust fan installation has to be handled with care, primarily due to the high moisture content interacting with the electricity that’s running through your exhaust fan.

I have a great deal of interest in digital photography, but my life is as crazy as anyone else’s. My son, family, and work keep me busy from dawn to midnight every day. I’ve never had time to cultivate any photography skills, even though I’ve always been very interested, sitting on the edge of my seat, if you will, for a chance to take some digital photos in order to learn a little about how capturing light can create astonishing works of art.

My interview with Matthew Danser had given me my long sought “excuse” to try out some photography techniques. But it also required that I put in an honest effort. The thought in the back of my head: These photos are going to suck. Probably a lot. And they will most likely be seen by the thousands of people who visit this blog monthly. Second gulp.

But I’m the kind of person so riddled with ADHD that even my paranoia about being judged on a mass scale can only last about three minutes before the audacity to try anything resurfaces and action is taken. So here’s what happens when a total amateur who has no idea what he is doing tries to “Paint with Light.”

A one-dollar flashlight from – you guessed it – the Dollar General. One dollar. Even. Gotta love it. Especially since it’s all I could afford, seeing as how I’m still paying off the aforementioned Nikon that I bought to take photos of our baby son. (True, a million pictures have been taken of him during his first year-and-a-half on Earth. However, 999,999 of those photos were taken with an iPhone. Go figya.)

THE PLAN, STAN:

The plan was to wait until it was dark in the apartment and do some light painting. I knew that I could use the Shutter mode on my camera to set it to take exposures of up to thirty seconds. I saw that my camera also had an option for bulb release, so, invoking Danser, who recalls how his girlfriend had to hold down the button on his camera for a full thirteen minutes, I determined that if I asked really nicely, I might be able to persuade my wife to hold down the trigger to get exposures longer than thirty seconds. Otherwise, thirty seconds was my window of time to do all the light painting I could.

I started off pretty timidly. I had seen photos online in which people used long exposures to create squiggly lines. The most popular examples are pictures of traffic at night, headlights and tail lights streaming, giving you a sense of the fluid motion of busy intersections. You’ve also seen those nature pics in which streams and rivers and clouds and stars become gauzy with movement because of long exposures.

But what I really like about Danser’s work is the use of color. The effect of running inside the hut and popping off red-gelled flashes shown at the beginning of this blog post (Matthew Danser! And happy lightpainting, everyone!

2. In order to open the headlight housing, it must be heated to soften the glue that seals it. Preheat the oven to 270 degrees Fahrenheit, and place the housing in the oven (top rack). Heat the housing for approximately seven minutes. Note that this time will vary by vehicle manufacturer and that you should be careful not to overheat your assembly. Also note that the headlight will be hot when removing it from the oven, so take care not to burn yourself.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

4. LED angel eye installation will vary by headlight. In this instance, we mounted an

5. Place the second layer back in the housing to ensure that everything is aligned the way you would like. This is also a great time to clean the inside housing, as you will not be able to do so once you reseal it. The cleaner you get it the better; smudges and dirt will be more visible when the lights are on.

8. Now it’s time to reseal the headlight housing. Preheat the oven to 270 degrees again, place the layers together, and put the headlight in the oven (with halo rings installed) for seven minutes. Remove the headlight from the oven, and press the layers together firmly as you work around the lens to ensure all of the edges are sealed (this might require gloves, as the headlight will be somewhat hot). Be careful to only press on the edges so as not to warp the lens.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

10. With the headlight housing installed, complete your wiring, and test connections to ensure proper installation. Be sure to tape/heat-shrink any wiring connections that were added, and clean up any loose wiring.