Anytime you call on contractors to perform work for you, you want to make sure you are choosing a company that is delivering the best service on the market and is improving your home or business. That is true for hiring solar installers as well. When you hire solar installers, screen potential companies for the following traits:

You can expect the Electric Connection to satisfy all these conditions. We’re the leading solar installers in the Los Angeles area and are ready to set you up with a solar system that saves energy and money while we redefine your notions of exemplary contractors. Call us to start on the road to energy savings!

Holiday lighting products have evolved into a much safer product over the years.  With the development of properly sized wires and fuses and LED lighting to reduce the consumption load and the heat the lamps produce, holiday lighting has never been more safe.  In the past people would take the old C style lamps and hook one string of lights into the other.  Often overloading one the strings or the weakest link.  This overload would often melt wires, create sparks, and in some cases even cause a fire.  The manufactures and improved safety standards and testing, help reduce to the chance of an overload by installing a fuse at the starter end or male end of the light string.  This fuse would blow or trip when the load became greater than the fuse capacity, which would then project the wire from the overload.  It is always recommended to install lights that are interconnected (one light string plugged into the other) to manufacture specifications as listed by there instructions.

LED or light emitting diodes have not only made holiday lighting more efficient but even safer.  The old style C7 and C9 lamps could reach temperatures of up to 350 degrees.  The hot lamp if rested against wood or dry Christmas tree, has the potential to ignite the material from the heat the lamp produces and cause a fire.  With LED’s to replace the old style incandescent lamps the chance of fire from heat is almost non existing.  However, it is still possible to cause a fire from electrical spark or short.  These sparks or shorts produce heat much greater and can easily ignite flammable material.  Sparks or shorts are often caused by frayed or damaged insulation on the electrical wires and also loose connections.  It is important to inspect your holiday lighting for damaged or loose components and replace when needed.  Be sure not to use any damaged equipment and immediately discard them to eliminate the chance of future use.

A common mistake made people make with holiday lighting is to plug to many holiday lights into each other.  UL listed holiday lighting and cord splitters are tested to specific tolerances and should only be installed to manufactures specifications.  The easiest location to find the manufactures is specifications is to look at the tag on the cord most commonly found near the male end of the cord or light string.

If enough standard wall sockets are not present and you must plug in multiple cords, it is highly recommended to install a plug switch with a built in overload device to reduce the risk of overload.  The built in overload should not be mistaken for a surge protection device.  A surge protector reduces or eliminates the excess voltage going to the device plugged into itself.  Where an overload device will shut off power at the point of installation if to much power is being drawn through it.

On many new homes we will install plug ins located in the soffit or eve to reduce or eliminate drop cords for holiday lighting.  These soffit plugs are installed on a special heavier 20 amp circuit and often include a convenience switch located inside the home to shut the lights on / off as needed.  The special circuit makes sure your holiday lighting is not installed on regular interior circuits so the chance of variable loads and overloads are dramatically reduced.

Permanent holiday lighting can be installed by a licensed electrician.  The most common type of permanent holiday lighting is LED strip lighting.  These are can be installed on the under side of eves or soffits for a permanent installation.  Depending on the type of LED holiday lighting you choose you may even have the option to change the colors of the lights with a push of a button.  This allows the holiday lighting to be used for many occasions throughout the year.  You can call today or schedule online to have a lighting specialist come to your home or business and provide you with a written no obligation quote.

Many homeowners know the pride and satisfaction that results from completing DIY repairs and improvements. But when it comes to electrical work, the stakes of making a rookie mistake can be high.

There are several common electrical projects that aren’t complicated or extensive, but even the simplest jobs can result in serious injury or property damage if they’re performed improperly. Before making any plans to engage in a DIY electrical project, it’s important to know the risks.

What Can Go Wrong

Electricians undergo an enormous amount of training in order to earn the licenses and certifications they need to do their work. That’s because mistakes could not only be dangerous for them, but also for anyone in the homes or buildings they’re working on. Even if you know your way around the circuit box, here’s what an electrical mishap can bring:

Hiring Electricians Saves Money

One of the most common reasons why electrical novices attempt this sort of work is to save money. But that plan can easily backfire even if no one gets hurt in the process.

Poorly performed electrical work can spark destructive fires. It can also fry circuits, destroy fixtures and even damage major appliances. When things go wrong, the cost of repairs is usually several times what it would cost to hire an electrician in the first place.

Making matters much worse, homeowners insurance companies will typically ask for confirmation that electrical work was performed by a licensed electrician before covering any damage from a related event. If your insurance carrier learns that you did the work on your own to save a few dollars, you could lose your claim or even invalidate your policy. Be sure you understand your full policy details before engaging in DIY work.

Know the Code?

When you hire an electrician, you’re not just passing the risk along to a professional -- you’re hiring someone who has knowledge you don't even realize your lacking.

Electrical work is constantly getting safer and more reliable through updates to the electrical code. Licensed electricians are required to keep up with this code as it evolves, so when you work with a professional, you can count on receiving the safest electrical work possible. When you go it alone, you may follow outdated methods because you weren’t aware of the code update.

Don’t take a chance. Your life and home are too valuable. When you need electrical work performed safely and properly, call upon your knowledgeable, licensed, local electricians.

You know that misusing your electrical system can be dangerous. With so much power coursing through the wiring in your home, it’s possible to cause a house fire if your system isn’t working properly.

Although an overcurrent protective device is installed on your electrical system to prevent house fires, you shouldn’t rely on that exclusively for your family’s safety. To ensure you and your family is safe, it’s important to know how to reduce the load on your circuits to prevent blackouts and the potential for a house fire.

An electrical overload is when one circuit in your household is expected to produce more power than it can reasonably handle. You don’t have to be a licensed electrician to recognize you are overloading your circuit. If you notice that your power trips when you plug in an electrical device, then you are overloading the circuit that electrical socket is on. Fortunately, there are ways you can reduce the load and prevent blackouts.

The easiest way to reduce the load any one circuit is responsible for is to use another circuit. If your circuits aren’t mapped out in your breaker box, then you can reasonably determine what sockets are associated with different circuits by manipulating the switches. Once you turn off the electricity in one room, you can test what sockets aren’t working to determine what sockets in your home are associated with each circuit. There is no danger to you by doing this, but it is time-consuming.

Armed with the information about what sockets work on the same circuit, you should distribute your use of electrical sockets across various circuits. By using other electrical outlets, you will avoid the tendency to cause a blackout.

You can improve your home’s safety by being mindful of your electrical system. If you are experiencing blackouts or you rely on a lot of electrical devices, it’s important that you avoid overloading your system. Beyond switching to a new circuit, you can have a member of our team install a new circuit which would help reduce your electrical load.