We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

If you are looking at your electricity bill and trying to determine where your money is going you need to know what appliances are using the most electricity. This will help you make better decisions about where to cut back in your home to truly make a difference on your electric bill. A Pasadena electrician has a list of the top 10 energy users in your home. If you would like to learn more about buying energy efficient appliances or other ways to save on your electric bill, give The Electric Connection a call today.

1-The biggest electricity user in your house is your air conditioning. With the height of summer just around the corner, it is time to start thinking of better, more energy efficient ways to cool your home. You can have a ceiling fan installed by an electrician. Pasadena homeowners can still stay cool without relying solely on the air conditioner.

2-Your refrigerator is next on the list. While you can’t really do without a refrigerator, you can invest in one that is more energy efficient than your existing one.

3-Space heaters, if you use them, are also big electricity users. Consider investing in an infrared heater.

4-Water heaters use a lot of electricity. You can reduce the need for the heater to constantly heat the water by ensuring it is insulated. Reduce the temperature on your water heater a few degrees as well.

5-Lighting is your next issue to tackle. You can save money on lighting by switching to LEDs and CFLs. Making sure lights are off when nobody is in the room and installing dimmer switches are also helpful.

These are just a few things you can do to reduce your electric bill. Making a few changes today can start saving you money on your next electric bill. Give The Electric Connection a call today to schedule your ceiling fan installation.

Smoke alarms have been required in homes, apartment buildings, and offices for many years. Regulations on carbon monoxide detectors are far more recent, but it’s vital to know whether a potential carbon monoxide leak could make your family members sick. The people at Nest, the same company that brought us the Nest Learning Thermostat, recognized a need for a combination smoke detector and CO detector and created a product that alerts you to danger in a unique way that helps you to feel that your home is protected no matter where you are.

We’ll look at the many benefits of integrated fire alarms and CO detectors in this guide, but be sure to call on a professional for installation. At FB Electrical Services, we’ll make sure that the unit is installed in the most accurate location for smoke and CO detection, that all of the electrical components are working properly, and that the detectors in each room are interconnected.

Decorating your home for the holidays is a time-honored tradition that many in the DMV area take part in each year. However, it’s important to be as safe as possible when putting up lights both inside and outside your home! When you string up lights in and around your home, you’re increasing your chances of an electrical malfunction. Make sure you follow these tips before and during your lighting setup!

If you have any questions, contact the electrical experts at Kolb Electric today!

Your lights—both interior and exterior—require some careful inspection prior to hooking them up. One of the most common causes of fires around the holidays are faulty string lightings. In order to avoid any potential electrical fires, it’s important to:

Need an electrician fast? Contact Kolb Electric today! We offer 24-hour service for your DMV home.