Electrical wiring is one of those things you don’t really think about. It is tucked away nicely behind your walls and is not really one of those things that comes up in normal conversation. You flip a switch you have light, you plug in your phone charger and it works. What more is there to think about? An electrician in Glendale will tell you there is a lot more to think about and be concerned about if your home was built before the 1950s. The team at The Electric Connection has seen it before and has helped other customers bring their homes up to date by upgrading their old wiring.

Old wiring may not seem like an issue until you get behind those walls. When you see how frail it is and the risk is poses to your home, you will see why other owners of older homes have taken the plunge and upgraded their electrical systems. Old wiring that was insulated with cloth was safe then, but by today’s standards, it is a fire waiting to happen. The cloth becomes brittle and falls apart, leaving the wires exposed. One touch of those wires is all it takes to create a spark that will ignite the insulation in the walls explains a Glendale electrician.

Old wiring typically means outdated electric panels as well. You have probably noticed your home doesn’t seem to accommodate as much as the neighbor’s newer home when it comes to plugging things in. You probably cannot run the microwave and the toaster at the same time or run the vacuum if you are making coffee. This can be explained by your electrician. Glendale homes built 60 years ago were not built to accommodate the many electrical appliances that we use in today’s world. If you are concerned about your home’s wiring, give The Electric Connection a call today and schedule an inspection.

Christmas is upon us again and more than any other time of year, it’s the time of year where people put strain on their electrical system.  The lights on your house and the beautiful decorations you’ve been storing in your attic finally are brought out and plugged in for your friends and neighbors to view and appreciate.  And, of course, the vast majority of homes you visit have at least one Christmas tree.  Since most of these things are electrical, it’s probably not a surprise to you that, as a top Dallas electrician, I start getting a lot of calls this time of year.  Though it’s always nice to have the business with Christmas so close, I thought it’d be great to share with ways to avoid wiring problems with your Christmas decorations this year:

             In general, there are a few important tips that can help you avoid wiring problems.  If your lights look frayed or dangerous, they should always be replaced or repaired before using them, frayed wiring are hazardous.  You should take care that your electrical source is safe before you even begin the installation process.  To avoid the potential for overloads, you should have dedicated circuits installed for your holiday decorations.

Most importantly, you should never try to supply power for your lights without contacting a top Dallas electrician to help you install the necessary equipment and make the necessary safety precautions.  Short cuts are potentially dangerous. I can remember one example where a customer had supplied power to their lights by splicing an extension cord directly into their circuit breaker box!  Even worse, they’d shut the breaker box door, pinching the cabling!  Left unchecked, even if this hadn’t started a fire, damage from a power surge or overload could have easily destroyed their whole breaker, meaning they’d have to spend thousands to repair the damage at the absolute worst time of year!

Take advantage of Custom Electrical Services and there partnership with MidAmerican EnergyAdvantage® Trade Ally Partner program.  Receive a free in business assessment on your current lighting.  Let us do the leg work and show you the HUGE savings.  Take advantage of the most current rebates available for your business.  Go green and receive some green at the same time!  LED is here to stay so start saving today!

LED lighting (Light Emitting Diode) is dramatically more efficient than standard fluorescent lighting.  With T12 fluorescent lamps drawing as much as 40 watts per lamp, LED lamps currently can draw as little as 18 watts per lamp.  That’s over a 50% reduction in energy when compared to a standard T12 lamp!  Not only do you get a 50% reduction in energy cost you can save on cooling cost too!  When replacing LED lamps with standard incandescent, high pressure sodium, and mercury vapor lights the new LED lamps DRAMATICALLY reduce the amount of heat produced.

Not only does the LED lamp save you money in energy cost you can also reduce your maintenance cost!  Currently LED lamps can last as much as 50,000 hours which is a much longer life span when compared to a standard lamp.  Paying a maintenance worker to change lamps can be expensive.  Especially for hard to reach areas that require large ladders or specialized equipment to reach the lamp needing replaced.  Even worse is having unqualified staff change your lamps.  Having unqualified people perform this task can lead to electrical shock, falls, or other injuries.

Contact us today and start saving!  Custom Electrical Services will come to your business and perform a free no obligation assessment.  We have replaced THOUSANDS of fluorescent lamps with the new LED in and around the Des Moines area the past year alone.  Businesses are starting to notice the advantages of LED and the amount of volume has gone up dramatically since!  Call today and schedule your assessment and take advantage of our MidAmerican EnergyAdvantage® Trade Ally Partnership.Thank you and look forward to hearing from you soon!

By Clarissa Allison | June 24th, 2016

Energy is the crux of many social, economic, and climate problems.  Renewable energy sources offer a brighter, more sustainable future.  International Energy Agency (IEA) estimates that almost 1 billion people will still be without access to electricity in 2030, in part owing to rapid population growth, mostly in sub-Saharan Africa and south Asia. The number of people without access to clean cooking stoves and fuels is similarly projected to drop only slightly, from 2.6 billion to 2.5 billion.