In our previous blog, the professionals at Electrical Gurus gave out some ways tips for increasing the safety of holiday decorations throughout the holiday season. Today, we’ll share even more ways to safely and effectively decorate your home this holiday season.

Even if the lights are unplugged when you’re hanging them (which is advised), be sure to never use nails, screws, or tacks to hang your Christmas lights; instead, opt for clips for interior and exterior applications. This will keep your wires from accidentally becoming nicked or frayed during or after the hanging process, which can get dangerous quickly.

Never use extension cords that don’t feature ground or are not rated for outdoor usage outdoors to avoid electrocution risk. Furthermore, it is especially advisable to only plug lights into GFCI outlets, especially if they are plugged into the exterior of your home. These outlets will essentially shut themselves off in the event of a short, which is crucial to avoiding safety concerns.

Always use timers for decorations and lights to prevent yourself from forgetting to turn them on or off. Lights should never be left on when nobody is home, which is why it is advisable to turn them off during daytime hours when the family is out-and-about. Timers keep your home safe by preventing power from flowing through the lights during the day, automatically activating them in the evening hours.

Large decorations, cords, and lights should all be kept well away from tripping hazards. Of special note is extension cords, which should never be allowed to cross walkways without proper coverage. Ideally, extension cords shouldn’t be run along open space in any way. If someone trips over one decoration, then odds are all attached decorations are at risk for getting dislodged or damaged.

If your home has the proper circuit breakers, there is little risk of a fire starting from overloading an outlet; that doesn’t mean it is wise to plug in numerous strands of lights into a single outlet. Spread the burden of lights and decorations across numerous breakers whenever possible to avoid taxing your electrical panel too much in certain areas. If your home is not equipped with a circuit breaker and still uses outdated fuses, please give us a call right away to talk about upgrading your panel.

We hope you’re safe this holiday season, but if you happen to overload your circuit breakers or have a concern about the lighting of your holiday decorations, be sure to give us a call right away. The electricians at Electrical Gurus want to help to keep every Des Moines family happy and healthy throughout the holiday season.

As the rest of the world is observing Discovery Channel®’s legendary Shark Week 2014, we at Mr. Electric® took it upon ourselves to set aside this time to celebrate what we have endearingly termed Spark Week. While the fascinating facts and featured film clips of the mystifying creatures are fun and interesting to watch, we believe the electric spark is just as deserving of our appreciation for a week as sharks are – especially taking into consideration that electricity wouldn’t exist without it.

As far back as 600 BC, a Greek philosopher by the name of Thales of Miletus discovered that when amber is rubbed with a cloth, it can be electrified and attract other objects and produce sparks. German mathematician and philosopher Gottfried Leibniz made the association of sparks with electrical phenomena in 1671. There were some more experiments performed in 1708 by Samuel Wall with amber rubbed with cloth to produce sparks. And finally, the story we are all familiar with, in 1972 Thomas-Francois Dalibard and Benjamin Franklin each independently demonstrated that lighting and electricity were the same thing. Ben even extracted sparks from a cloud during a thunderstorm with his famous kite experiment.

The discovery of the electric spark encouraged electrical research. Once scientists began to understand how electric sparks occurred in nature, the question became how that power could be harnessed and controlled. This was the beginning of electricity.

Spark plugs begin the combustion in your car’s engine, allowing you to start your car every morning. The discovery of the electric spark led to the development of spark-gap transmitters. While these transmitters are no longer used in radio communication today, they played a large part in the beginning of wireless communication. Without sparks, you would have a much harder time driving, listening to music, and even seeing in the dark. The discovery of sparks is one of the most important scientific advances in history, so don’t forget to celebrate Spark Week!

High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.

Fortunately, stormy weather days are behind us, but it is always a good idea to revisit storm safety. While you probably don’t have to worry about a thunder storm creeping up on you in the fall and winter, knowledge is power and keeping storm safety fresh in your mind will ensure you don’t forget it. These are a few tips from your Glendale electrician to keep in mind the next time you see thunder clouds building up. If you have any questions about these tips, give The Electric Connection a call.

*When a storm is building or you hear thunder in the distance, get out of the pool. Avoid being in the bathtub or shower as well. It can all wait.

*Unplug appliances, computers and chargers. This will ensure your expensive electronics are not damaged should lighting strike and come through the electrical wiring to your home.

*During a storm, avoid using any of your electronics. Do not touch outlets that may conduct electricity and shock you.

*Stay away from windows during a storm and don’t stand in an open doorway. Lighting can easily travel through the space.

*Consider having a whole house surge protector installed by an electrician in Glendale. The surge protectors will prevent the surge in electricity from damaging your appliances that may be plugged in, including your refrigerator.

*Don’t use a corded phone connected to a landline. Electricity can travel through the cord and shock you.

If you suspect your electric panel has been damaged by a storm, call an electrician. Glendale homeowners will need an experienced professional to deal with any damage that may have been caused by the storm. Replacing burnt wires or breakers that were damaged in the storm are a necessity. Give The Electric Connection a call today and schedule your whole home surge protector installation to keep you and your home safe during the next lightning storm.