Well, it happened again. The kitchen and bath pros who make up the via www.marketwatch.com

Giant windows are great if possible. That’s a big IF, though. Sometimes, natural light isn’t an option, either because the laundry room is subterranean or otherwise windowless. Obviously, in the image below, natural light is not an option. Yet, the color temperature of the ceiling light is neutral enough to make this laundry room bearable while another, poorer lighting choice could have made this tiny laundry room annoying to visit and kind of scary.

You didn’t think I was going to avoid talking about lighting solutions just because natural light is such a great option for laundry rooms, did you? So, how should you light your laundry room? For any type of laundry room, there are some fundamental guidelines.

I’ve already suggested that you ALWAYS USE NATURAL LIGHT, when and if possible. And for your other light sources? Consider choosing lights with a Color Rendering Index (CRI) of as close to 100 as possible. A light source’s CRI is, in effect, a metric by which to compare the ability of artificial light to render color as well as the sun. 100 is the maximum CRI. Some lamps, like low-pressure sodium lamps, can actually have really low CRIs, while there are now some LED lights with CRIs of 95 – 98. If the sun isn’t shining in your laundry room, there are plenty of excellent options that closely match natural light’s ability to render color and help you keep your clothes clean and fresh as can be.

Layer your lighting.

OK, so this is the main theme in pretty much all lighting design guides. Layering your light pretty much means that you should think about general light, accent lighting, and task lighting. In the main section of a house, this might look like mini recessed ceiling lights with square bronze trim, elegant track lighting to spotlight a painting or picture, and a reading light by the chair or some under cabinet lights illuminating the bar counter. In a laundry room it might look like the image below.

Sometimes, in larger laundry rooms, you can have all three kinds of light. But, generally speaking, laundry areas are on the smaller side and are too focused on pragmatism for decorations that would benefit from accent lighting. Keep in mind that this is a generalization with exceptions galore, but, generally, the two kinds of lighting you’ll find in laundry areas are ambient overhead lighting and task lighting, and this scheme usually takes the form of a ceiling light or two and under cabinet lighting.

Creative Options.

The home electrical system consists of various components that enable the safe delivery of energy to different sections and appliances in the household. Even though the system may appear complex, it is important for the homeowner to understand a few basics.

This would help you when things do not work or there is an emergency that requires turning off circuits or the entire installation. In addition, an understanding of the home electrical system will help the owner respond to questions from prospective buyers.

All the electrical circuits in the house originate from the main breaker panel. The panel is usually inside the house and near to the power entry point. However, the panel can also be far, and especially when in a multi-family structure.

The rating of the panel determines the number of circuits and power that the home electrical system can support. Some older homes have been using the 100 Amp service, smaller installations use a 60 Amp service while newer and larger houses are built with 200 amps to accommodate the increased number of electrical and electronic equipment commonly used in a modern household.

Different loads require the correct size of cables and breakers that can handle the current without heating up. For example, an air conditioner requires a 30 amp circuit while a kitchen may use two 20 amp circuits.

If there is a fault, such as a short circuit or overload, the breaker trips and cuts off the power to the affected circuit, hence preventing further damage that could lead to fire. Before resetting the breaker, you should first ask an electrician to check and rectify the problem.

A home electrical system consists of different individual circuits originating from the main breaker panel. The wires from the panel run to the rooms to supply the outlets, lights, and hand wired appliances. In most cases, several rooms may share the same circuits such that all the lights in the house are on one breaker, outlets on another breaker, etc.

Some dedicated circuits from the main breaker may go directly to the hard-wired appliances and nowhere else. Equipment such as the electric water heaters, furnaces, and air conditioners are usually installed on their own. Other hard-wired devices include the smoke alarms, which may also have battery backups so they will work even when there is a power outage or a fire interrupts the home electrical system.

Grounding is an essential protective feature that must be installed in all home electrical systems. It provides a path for the electrical current arising from faults that make the exposed metallic parts to become live and dangerous.

The ground connects all the exposed metallic parts to the earth mass through a third wire in the power cord to the equipment. This provides a low electrical resistance path for the current, hence, making the parts safe to the touch even in the event of a malfunction.

maintenance and repairs.

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Smoke detectors are wonderful devices. They save homes and property, prevent countless fire-related deaths, and alert people to potential fires before they are out of control. In fact, these alarms are so invaluable, many insurers offer discounts on homeowners coverage for homes equipped with working smoke detectors.

Summer heat is upon us, so what better time to kick off our annual ceiling fan give away with a free professional licensed electrician to install it!  What is the catch?  You must like our page on Facebook and share our post.  Our electricians want to reward you with a ceiling fan for being our fan!  We will come out and install the fan in the lucky winners house.  We wont try to sell you anything and you wont owe us a dime!

To qualify you must like and be a fan of our Facebook page, share our post and live within 25 miles of one of our electricians in Des Moines or within 25 miles of our Clive office.  For free installation there must be wiring already in place where you want the fan installed.  If there is no wiring already there no problem the fan is still yours!  Or we can install in another room for you free of charge.  We will pick one lucky winner on August 28th, 2015.  Our winner will be announced via our Facebook page.

One of our friendly electricians will come out to install the ceiling fan for you.  We will remove your current fan or replace your light with your new free fan!

Well lets not forget to mention the obvious.  It’s free!  A ceiling fan can help reduce your heating and cooling cost.  In the summer your fan needs to rotate in a counter clockwise direction.  This will blow the air straight down and produce that cool summer breeze you have been looking for.  In the winter you want to turn your fan on so that it rotates in a clockwise direction.  This will help push the warm air trapped on the ceiling down.