LED fixtures, such as

With energy consumption that is less than half of what 150-watt LED parking lot light that is a direct replacement for 400-watt metal-halide (MH) fixtures. That’s 250 watts less for the same amount of light!

The average price of electricity per kilowatt-hour (kWh) is 12 cents. To figure out the monthly cost of running 25 LED parking lot lights for 11 hours per day, use this formula: (combined wattage x monthly hours of use)/1,000 x price per kWh. For 25 LED lights, (3,750 x 330)/1,000 x .12) the total would be $148.50 per month or $1,782 per year.

When the same formula is used for 400-watt MH fixtures, the monthly cost is $396, and yearly cost would be $4,752. So, in this situation, switching to LED fixtures would save approximately $3,000 per year. When coupled with the savings on maintenance, LED fixtures can save $6,470 per year. At that rate, the cost of 25 $340 LED fixtures would be recouped within two years.

Left: LED wall packs; Right: HID wall packs

Unlike LED fixtures that light up instantly, HID parking lot lights require a warmup period of up to 10 minutes before they reach full brightness. They also can’t be turned immediately back on after being switched off; this is called restrike time, and it can take up to 15 minutes before they can be turned on again. Attempting to power on the lights before the bulbs have cooled can damage a fixture’s components and cause the HID bulb to fail sooner.

HID lamps consist of a ballast and a quartz tube that contains gas, metal salts, and two tungsten electrodes. In order to create light, an electric arc passes from one electrode to the other through a gas (most commonly mercury, metal halide, or sodium). The mercury used in this process is dangerous if enough is inhaled or released into the environment. If an HID bulb bursts, all contents should be put into a sealed container or sealed bag and taken to a recycling center or hazardous waste facility. If HID fixtures are used indoors, wall packs and canopy lights, are used indoors, the possibility of ultraviolet (UV) radiation exposure should be taken into consideration. HID bulbs emit a substantial amount of UV radiation, but an outer glass envelope prevents the radiation from escaping. However—according to the FDA—”If the outer bulb breaks and the inner tube continues to operate unshielded, intense UV radiation is emitted. UV exposure at this level can cause eye and skin burns, as well as blurred or double vision, headaches, and nausea.” The UV light from an HID bulb with a broken envelope can also lead to discoloration of items and fabric. LEDs emit little to no UV radiation.

In short, LED lights are a better alternative to HID parking lot lights. They offer a great deal in the way of savings, longevity, maintenance reduction, brightness, color, and safety. While it may take a short amount of time to recoup the price of switching to LEDs, all of their qualities make it easy to see why so many businesses have started the process.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Generally, it doesn’t cost much to hire an electrician to have repair work or installation done at home. Yet, many homeowners in Oregon feel they can save the money they would have to spend by taking care of the problem on their own, even though they lack the experience and the expertise to do it right. This often leads to greater problems and they have to spend more money on the repair than they would have if they had called in an electrician in the first place. Of course, hiring the right electrician isn’t simply a matter of finding a number in a directory and making a call.

There are thousands of electricians you will find and not all of them are made equal. Not to mention, they don’t all offer the same services. But it is important to understand that even with electricians, there are different types. There are electricians that take care of the big stuff and then there are electricians that handle the small stuff. It is important to identify the kind of problem you are facing before you call an electrician.

What is low-voltage wiring and where can it be found? This covers everything from communications to entertainment systems, for example, televisions and telephones, small electrical devices much like doorbells and thermostats. A low-voltage electrician takes care of these things for you so the next time your TVdoesn’t work, call in a low-voltage electrician as he will be quick to assess what is wrong with it and will fix it much quicker as it is after all, in his job description. He will ensure that the wiring is properly installed and that the device does not malfunction again.

A low-voltage electrician will visit clients that are in need of installation or repair, will scope out the job as well as determine what tools are required and also how long it will take to fix whatever it is that needs fixing. For example, a thermostat which is malfunctioning may be the consequence of a frayed wire or it could it that it happened because of a poor wiring job which needs to be redone.A low-voltage electrician will know just how to do it.

Once thelow-voltage electrician has diagnosed the root cause of the problem, he will correct it. Should you need new installation, he will recommend one that will fit your needs as well as your budget. Once that is done, the process of fixing the problem will start.

Think of them as doctors of electronics making house calls in order to check faulty wiring. It doesn’t matter if it is a doorbell that is no longer working or a cable connection that flakes out on you when you are binge watching the last season of Breaking Bad, a low-voltage electrician will come and fix the problemfor you.

It is as difficult to find a low-voltage electrician as it is to find a high-voltage one. But luckily for you, low-voltage electricians are licensed as well. So, find a contact from your most updated yellow pages and once you have a chance to meet the electrician, ask them to see a license. And there you have it.That is how you find the right AND legally authorized low-voltage electrician for any low-voltage work you need done at home.

To conclude, it is important to acknowledge what low-voltage electricians do and how helpless youwould be without one. No one can imagine their lives without the little technological advances in their everyday lives.

In the late sixties, and early seventies aluminum wiring began to be used because most available copper was going to the Vietnam war effort. However, aluminum wiring is not ideal for small home electrical systems.  The electrical devices at that time were not designed to handle the high temperature coefficients of aluminum wiring. Aluminum wires can also expand in diameter and length as they get hot, they can actually back out the screw terminals, causing a loose connection. This, in turn, can cause heat, which can ultimately lead to a fire.

After problems with aluminum wire termination became known—including one notable house fire—the UL (Underwriters Laboratories) and other agencies adopted new safety regulations and put more restrictive standards in place. However, many homes from the 60s and 70s still do not have safe aluminum wiring terminations. But there are a number of ways to solve this problem without having to rewire a home.

Consumer Safety Council Recommendations

According to the Consumer Safety Council, there are only two approved methods that splice aluminum wire to copper wire:

These standards have caused acceptance problems with home inspectors and insurance companies, which has led to homeowners paying 2 to 4  times as much as they should to have their aluminum wiring terminated.

Love is in the air, which has gotten me to thinking about lighting. (Come to think of it, what time of year doesn’t do that?) If Valentine’s Day always gives you a hankering to pop Gone With the Wind or your favorite rom-com into the DVD player, have you ever thought about what goes into making those romantic films?

Color temperature is one of the first things to note when studying the lighting in a romantic scene. Is it orange? Bluish? White? Most often, warm colors add to an inviting, romantic atmosphere. For example, the warm light in this sunset scene in Titanic draws the audience in, unlike the cold, blue lighting later in  the movie, after things get dire.

2. Brightness (and Shadow)

You can judge the quality of light in a film scene through the hardness or softness of its shadows. Hard quality light has dark shadows with sharp edges, and often feels more raw than soft quality light. Soft lighting, often used in older films, has lighter, diffused shadows and tends to feel more sentimental. If you’ve seen Casablanca, you know what I mean.

Of course, there are always exceptions to these rules.

Cool lighting can still be quite romantic in the right setting. Like in this still from The Notebook:

And with advances in film technology, sharp shadows can also be quite romantic. Case in point, this still from the end of the 2005 version of Pride and Prejudice:

The latest designer lamps and home accessories from Hinkley, Quoizel and Schonbek are beautifying springtime holidays like never before.  Bring enlightenment and renewal into your home with outstanding lamps, chandeliers, pendants and energy-efficient outdoor lighting.

Hinkley Lighting has been proud to offer its lighting products to consumers through Capitol Lighting as another family-owned and operated business that prides itself on exemplary service and quality. —Rick Wiedemer, President, Hinkley Lighting

-Quoizel designs are timeless, blending effortlessly with changing decorative schemes unaffected by passing trends, fads or style crazes.

-The Lenox Lighting line is graced with the finest silk shades perfectly shaped and proportioned to maximize lighting effects. The china is crafted to surpass the highest quality standards in the industry. Every porcelain finial is designed exclusively to match the coordinating lamp.

-Quoizel Lighting stands apart in distinction with an outstanding collection of mirrors, unique ceiling fixtures, superb outdoor lighting, stylish bath lighting, and one-of-a-kind tiffany style lamps.

-Quoizel artisans work tirelessly to ensure their Tiffany lamps are composed of individual handcrafted pieces of art glass.  Some of the Tiffany designs are reproductions of original Louis Comfort Tiffany and others are Quoizel’s unique creation. Outstanding new Tiffany style lamps employ color combinations in materials such as jade, agate stone and mica.

*Schonbek is a member of the Swarovski Company.