Typically electricity and water don’t play well together, but modern technology has given birth to lights that can not only get wet, but be fully submerged underwater.

Color-changing capability, energy efficiency and custom lighting effects ramp up the cool-factor even more. There’s no end to their creative applications, but I’ve found that some people are prime candidates for these innovative lights.

This is really important! Note that there can be vast distinctions between the different lights that are labeled “wet location lights.” A light fixture that can withstand rain may not be able to withstand full immersion. It all comes down to a vitally important specification called an Ingress Protection Rating (or IP Code). For the purposes of today’s post, we’ll be talking about lights that are IP-68 rated. (Read more about that via

We’re excited to announce that we now offer

Multi-panel light systems are designed to add a point of interest and liven up a room. They can be used for numerous applications, including dental office lighting, lobby lighting, hospital lighting, classroom lighting, waiting rooms, conference rooms, basements, and more. A choice of stock cloud images can be split into two-, three-, four-, or six-panel displays depending on the chosen panel size. Custom panels can include any image and number of panels, and they can be arranged in any way.

Each Even-Glow® LED panel light uses perimeter-mounted LEDs with an optical diffuser to emit natural white illumination without visible bulbs or hot spots.

Dimmable and non-dimmable panels are available for custom or static levels of light. Dimmable panels consume just 40 watts of power, and non-dimmable 2-by-4-foot and 2-by-2-foot panels consume 50 or 72 watts respectively—significantly less than fluorescent fixtures. The panels have sturdy white or black aluminum alloy frames. They operate within a 100-277V AC range and are designed to last three times longer than fluorescent troffers.

If you are thinking about beating the heat this summer with a new pool in your backyard, you will need to hire an electrician in Pasadena to complete the wiring. A new pool is an exciting toy that will lead to hours of fun for the whole family and of course, family friends. There are plenty of tools needed to keep your pool clean and safe to use. Tools like filters, pumps and heaters if desired, all require electricity. Water and electricity do not mix so it is important an experienced electrician, like those at The Electric Connection, complete the wiring for the pool to ensure it is safe. Even if you are choosing to go with an above ground pool, there is still some electrical that will be needed to operate the filter and pump.

The following are some of the things that will need to be addressed when bringing your pool up to Pasadena electrical codes.

*Depth of the wiring must be buried at least 18 inches for PVC conduit or 6 inches deep for EMT conduit. Your electrician can discuss this in more detail with you.

*Your pool will need a dedicated breaker and outlets to run on. The outlet needs to be no closer than 6 foot from the pool’s edge and no farther than 20 feet from the pool. This is the receptacle that will be used to power your filtration system, pump, heater and an automatic pool cover if you choose.

*Lighting inside the pool and around the pool area will also need to be installed by an electrician.

If you home’s electric panel is already maxed out, you may need to have a sub-panel installed to run the various equipment needed to keep your pool in tip-top condition. Give The Electric Connection a call and schedule an appointment to discuss your pool installation needs.

via Tooshlights.com

Ultimately, Tooshlights wants to improve the public restroom experience. “We’ve all been in a public restroom with a line out the door, and no way to tell if a stall is open, occupied or out of order without looking under the door or peeking through the crack,” Tooshlights.com