Electric vehicles are one of the hottest new trends in the automotive industry. The idea is very appealing—According to ChargePoint, EV drivers save over 2.4 million gallons of gas annually and this will most likely only grow as popularity continues to increase. Going green is a very admirable goal. If you have considered the idea of an electric vehicle, one of the most common Los Angeles electrical questions you may have is how you go about keeping your car charged when you are on the go in day –to-day life. Utilizing your home’s electricity properly as well as visiting charging stations, such as those by ChargePoint will keep your EV going strong.

When it comes to charging at home, it is important to save money when at all possible while charging. You may want to contact an electrician in Los Angeles, from The Electric Connection, to see if your plug-ins, wiring and other equipment is up to par and will properly charge your electric vehicle. Then, it is important that you check with your electric company and see if there are any ways to save money by charging at certain off-peak hours. You may find that by changing your electric plan, you can save a significant sum on your electricity bill.

Charging on the go is becoming easier as more electric vehicle chargers are now available. For instance, in New York, there are currently 800 charging stations, and plans are to grow this to 3,000 over the next five years.

There are so many benefits to choosing an EV. In California, you may be able to drive in the HOV lane, even when driving alone. Spend some time researching and talk to an expert on electricity matters, such as The Electric Connection, and decide if it is time for you to jump board with the electronic vehicle trend.

As a business owner, it is important to reduce your energy emissions as much as possible. You can easily make a conscious effort to do this by reducing packaging, using sleep mode on all your electronic devices and shutting down everything at the end of the business day. Another good way to reduce your emissions and your electricity bills is to use LED fixtures in your buildings, offices, and even parking lots.

Here’s how businesses around the world are taking a step towards reducing their environmental impact using commercial LED lighting.

There are a number of reasons why LED lights make a better choice for the environment and sustainability. The lifespan of a LED bulb is up to 80,000 hours, whilst halogen bulbs are only estimated to last between 2000-6000 hours. The bulbs also gradually lose lumen output at a rate which is almost undetectable to the human eye, in comparison to a metal halide or halogen bulb which fluorescent strip lights to LED tubes, the first thing they will notice is that there is no waste disposal required. Due to the chemicals in fluorescent lights, waste disposal or Light Supplier in the UK. Leila is a Public Relations graduate from Sheffield Hallam University.

Simply put, these are electrical protection gadgets that can be used with a wide range of voltages. MCCBs, as they are commonly known, have adjustable trip settings and can hold as much as 2,500 amps in current ratings. They are also used with frequencies that are 50 and 60 Hz and have the following 3 functions:

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion