Add the perfect custom finish to the front of your home with outdoor hanging lanterns and wall lanterns.

When using two outdoor lanterns, they should measure about 1/4 the height of the front door(s). When you are using only one lanterns, 1/3 of your door height is appropriate.

Outdoor hanging lanterns should be centered over your front door(s), high enough so that the doors may open and close freely. If you have a picture window or archway above the front door, center the fixture so that it may be seen from inside your home.

Wall lanterns surrounding the front doors should be proportional to your home, when in doubt, size up! Remember, fixtures appear smaller from curbside viewing than most people would imagine.

Wall lanterns are also appropriate for rear and side entrances and by garage doors – same rule of thumb for sizing applies for these areas.

Path Lighting should be placed 6′ apart to ensure adequate beam spread.

Be sure to make your space functional! Task lighting is an important piece of the design; it will provide guidance and illumination in the necessary areas to ensure safety.

Focused illumination on key holes and security pads allows for easy access when you are entering and leaving your home at night. Outdoor LED wall lights or recessed spotlights work well in these areas.

Add path lighting to walkways every 6’ to provide adequate beam spread. This will create curb appeal ambiance and visibility when walking at night. Don’t forget to add light near the house numbers – this can help in emergency situations and for deliveries!

After the sun goes down be sure your home has the same curb appeal as it does during the daytime by adding outdoor and uplighting to the landscape.

Illuminating trees or other elements from below will create soft focal points in the landscaping after the sun goes down. Use a flashlight to test where you’d like the light to hit, then mount the fixtures accordingly. Be sure to mount fixtures out of grass for ease of mowing and other landscaping tasks.

Be sure to view your outdoor lighting after dark before signing off on a project; it’s easy to make necessary adjustments to refine your outdoor lighting design.

To avoid being “that neighbor”, be sure to eliminate glare and make sure your outdoor light fixtures do not create “light trespass” into your neighbor’s property.

The kids are grown and have homes of their own, so it’s time to make those empty rooms into that den, office, sewing room or home theater that you’ve been wishing for over the years. Or, perhaps you’d like to update your kitchen with new appliances or add some new, luxurious bathroom lighting fixtures. Maybe you’ve been thinking about a whirlpool bath. Why not? However, don’t forget to give your local electrician a call as you’re planning those changes. Chances are good that you’ll need a few electrical upgrades to make sure your wiring system is ready to handle the increased load. Consulting an electrician in Pasadena who is licensed and knowledgeable about home renovations can help you keep you avoid last minute complications as your project gets underway.

Electrical system upgrades are often an afterthought when homeowners start planning a remodeling project. Often, the plans are made and the new appliances, lighting and other electrical components chosen before the very basic issue of how to power them is discussed with an electrician. Pasadena homeowners, for the most part, just don’t stop and think about things like electrical load distribution and wiring system capacities when picking out that new, streamlined refrigerator or over-the-range microwave. However, forgetting to plan for those practical things can lead to unexpected costs when the need for electrical upgrades to make it all work becomes apparent. Including a licensed and bonded electrician in the initial planning of your home improvement project can ensure that necessary electrical work is budgeted in from the start, eliminating unpleasant surprises.

If you’re planning a remodeling project and have yet to choose an electrician in Pasadena homeowners won’t find an electrical contractor than H Electric. With more than twenty years of experience with remodeling projects in the Pasadena area, we offer knowledgeable advice and quality electrical services to ensure that your project turns out right. And, every job we do is backed by our famous lifetime guarantee.

Click here to read more

CFLs are those new, small fluorescent light bulbs that screw into most regular light fixtures. You can use them to replace regular (incandescent) bulbs to save money and electricity. As the Los Angeles Department of Water and Power gets over 60% of its electricity from fossil fuels, especially coal, any time you replace a regular incandescent bulb with a CFL, it’s one small step towards reducing fossil fuel use in L.A.

CFLs come in all different shapes, but basically they’re a fluorescent tube bent this way or that or twisted into a spiral. “CFL” stands for “Compact Fluorescent Lamp.” They’re more compact than the long fluorescent tubes of our childhoods. They’re lamps, which is electrician-speak for “light bulb.” Here’s why they’re green — they save 75% of the energy that traditional incandescents use.

Here’s why they save you money — they cost more than a regular incandescent, but last a lot longer — 13 times longer. So even though each CFL costs more per bulb (about $4 for a CFL), it will also save you about $4 in bulbs as you won’t have to replace it so often.

Your electric bill will show more significant savings. Lighting costs about $20 out of $100 monthly electric bill. Because CFLs use one-quarter of the electricity of a regular incandescent, if you replace all the bulbs in your house with CFLs, you’ll save about $15 each month on a $100 electric bill.

CFLs are green, but not blue. Many people don’t enjoy the eerie bluish light of the old-fashioned long fluorescent tubes. CFLs can create all different colors of light, including warm tones. A recent study by the magazine Popular Mechanics found that even when people didn’t know which type of bulb was involved, they preferred the light of the CFL over the light from incandescent bulbs. CFLs also don’t buzz as the long tubes did.

CFLs have one downside — they each contain a small amount of mercury, which is a toxin. If a bulb breaks, you’ll need to take care to clean every bit up and to not touch the pieces. You’ll need to recycle spent bulbs or dispose of them as you would paint or other hazardous waste. However, they’re so long lasting that this will come up on the order of years, rather than months.

OK so you have a basic understanding of CFLs, now what can you do that’s simple to save money and electricity? The next time you go to the store, pick up a four-pack of CFLs. Choose four incandescent lights in your home or business that you use often and replace the incandescent bulbs with your new CFLs. You’ll start saving on your electric bill and will decrease the burning of fossil fuels to power Los Angeles.

Click here for more tips on saving electricity.