Here in the MD/DC/VA area, it’s not uncommon for us to lose power when a summer storm rips through. And while these outages sometimes last only a few hours, storms that have occurred over the past several summers have left people in the dark for several days at a time. At Kolb Electric, we’re big fans of Generac generators—they are among the most reliable systems available, and they’re the only ones we install. That said, there are a few things you should consider if you’re thinking about installing a standby generator:

You can’t stretch the amount of power that generators supply, so make sure you receive an NEC (National Electric Code) approved load calculation with each proposal. Kolb Electric will provide this calculation with our estimate.

Standby generators must be permitted prior to installation and inspected following installation. Kolb Electric will do the work of acquiring the necessary permits for you, and we want to remind everyone not to have your system installed by a contractor who says they can do it with no permit. HOA requirements and approval processes vary, but key concerns often come down to noise and location.

In the event that your standby generator installation does not require a permit, make sure to ask if it will be installed up to NEC code.

Some people install generators to keep the essential functions of their home running, such as the refrigerator and a few lights. Others install theirs to be able to carry on with life as if nothing had happened. Before you install a standby generator, decide what you’ll want to run and what you can do without. Remember—too much capacity will needlessly inflate the cost of your system, so try to be realistic when deciding.

At Kolb Electric, we’re committed to installing your generator efficiently and effectively. Even so, the generator installation process can get hung up at different phases, such as permitting, and may take up to a few weeks to complete—especially during the busy summer months. Don’t wait until a major storm has been forecast before you install your standby generator! Try to do it during the spring or fall, before you need it (and, more importantly, before everyone else needs it!).

What type of generator will you be installing? Air cooled or liquid cooled? Is it natural gas or propane? Will you be receiving a gas meter upgrade? At Kolb Electric, we’ll talk you through your options and help make sure your standby generator does everything you need it to.

Whenever you have any sort of electrical work done, you’re not just buying the system—you’re also buying the company doing the install. With this in mind, it’s important that you know their qualifications as well as those of the technicians who will be installing your generator. Ask the following questions:

Kolb Electric has been in business since 1925, and all of our staff is licensed and trained to install Generac generators.

Standby generators require on-going annual maintenance, which Kolb Electric will provide with a service agreement. Make sure you also register your Generac generator with the manufacturer for warranty claims.

The lowest bid may sound appealing, but the deepest discounts won’t offset the costs of correcting an improper installation. When you see a huge price difference from one company to the rest, you can be sure something is being left out: load calculations, size inspections, and gas meter upgradesare just some of the areas where some unscrupulous contractors may cut corners and leave you up the creek when the big one hits.

Standby generators are designed to protect your biggest investment: your home. Take the time to get accurate answers regarding your system to keep your family safe.

If you’re thinking about installing a Generac generator in your home, call Kolb Electric today!

If you have had your electric car for a while you have probably enjoyed saving on your weekly gas bill. Of course that is if your car is charged and ready to go when you are. If it is always on low-charge, you are relying on gasoline and the savings you could be experiencing is nowhere near what it should be. This is usually because people are trying to use a Level I charger to keep up with their busy lives. If you want to have a car that can keep up with you and your busy schedule, give your electrician in Beverly Hills a call. At The Electric Connection, we have experienced electricians who can help you get what you need to make your car more economical.

If you are ready to make your work for you, look into buying a Level II electric car charger. These chargers require less than half the time to get your car fully charged. The slower trickle charger typically needs a full 24 hours to get your car charged. The faster charger only needs 6 to 8 hours. Because it is a faster system, it requires more juice. This means you need a 240-volt outlet. A Beverly Hills electrician will need to install this outlet. They are not standard in the garage or carport.

Before the outlet can be installed the electrician will need to do an inspection of your electric panel to make sure there is room for the additional breaker needed to power the outlet. Most new houses will have the room. If your home is older, an electric panel upgrade will be needed. This is something your electrician will discuss with you. If you would like to take the first step in getting your home ready for your new Level II electric car charging station, give The Electric Connection a call today.

As the summer temperatures soar, people are more inclined to stay indoors for the most part. This also means, they want the temperature in their homes to be cool and comfortable. While no one wants to compromise on the comfort factor by using their HVAC systems sparingly, they are eager to curb electricity costs.

This seems like a catch 22 situation; but there are some simple ways in which you can maintain cooling in your home, and save on electricity too:

Instead of setting the air conditioning at a very low temperature, use ceiling fans or oscillating fans in conjunction with the AC system. You can set the air conditioner to a higher temperature as that will help maintain cooling in the room; the ceiling fan helps keep you cool as it aids in air circulation; you end up saving money as your ac doesn’t have to operate on a lower temperature.

When you are purchasing appliances, devices or lighting fixtures, opt for ones that have a high energy rating. This will ensure you save a significant amount of money on your utility bills.

It’s very common for us to keep mobile chargers, power strips and other appliances such as microwave ovens etc. switched on, even when we are done using them. It’s best to turn these off instead as that too helps in reducing your electricity expenses in the summer time. Any savings you make in this way help absorb the increase in cooling costs, that’s bound to happen in the summer time.

The AC filters should be replaced with regularity and the entire system maintenance should be done as per schedules recommended by the manufacturer. In most instances, a monthly check helps ensure that the unit is operating efficiently.

Operate and set the thermostat as per the outdoor temperatures. If your home is empty, you should turn up the system as the house wouldn’t require cooling.

The natural sunlight that streams in through the large glass windows and doors in your home also brings in a certain amount of heat. Use UV protective tint on the glass panels and draw the shades and curtains from inside. While this will make the indoor spaces darker, it can help reduce the stress and strain on your HVAC system, which in turn reduces utility costs. You should also shut the doors and vents of rooms that aren’t being used.

When the sun is shining bright, there is no reason to continue using the dryer; hang your laundry out in the open. Dyers are energy-guzzlers and you can easily eliminate this expense in the summertime when the climate is perfect for drying laundry outdoors.

When the summer months bring in the sweltering heat, you would want to keep your home cool without having to pay prohibitively high energy bills. The points we discussed above will help you reduce these costs to a certain degree. These simple things followed with regularity can go a long way in helping you cut down on your utility bills.