Smart homeowners are always looking for ways to lower their electricity bills. Not only do you save money, but you reduce your environmental footprint as well by decreasing your reliance on fossil fuels. Lowering your electricity and other utility bills can increase the value of your house and even correspond with living a happier life. There are endless tips and tricks available to help you cut back on your electricity usage, but be prudent -- there are some persistent myths out there about home electric use that won't actually help you save energy, and could end up costing you. Read on to find some common claims about electricity that simply aren't true.

Energy efficient light bulbs are too expensive: Light bulbs cost more to buy in the store than they used to, it's true. Thanks to federal regulations, traditional, cheap, incandescent bulbs have all but disappeared from the market,  replaced with options like compact fluorescent bulbs, LEDs and halogen bulbs that all have a higher price tag. However, the modern bulb options use far less electricity and have longer life spans that the incandescents of yore, meaning you will actually save money in the long run. The average household should save about $75 each year by replacing old light bulbs with newer, more efficient versions, according to the U.S. Department of Energy.

You don't need to power off your computers and other electronics when you aren't using them: Most computers, televisions and other modern electronic devices go into sleep or hibernation mode when they haven't been used for a period of time. However, hibernating is not the same as fully powering down. Leaving a computer in sleep mode still draws electricity. Furthermore, even in sleep mode, electronics experience tiny but cumulative wear and tear. Save electricity and prolong the life of your devices by shutting them off and unplugging them when you don't need to use them for several hours.

Setting the AC to frigid will cool your house down fast: Wrong. Your air conditioner cools at the same rate regardless of how hard it has to work to meet your thermostat setting. So if you turn the dial to its lowest setting, you won't cool off any faster, but you will waste electricity once the machine passes your desired temperature and keeps on trucking to cool the house even further.

Solar panels aren't an option for me: While solar panels produce best in climates with a lot of clear, sunny days, homes in cloudy or rainy regions of the country can also benefit from them. Fog and clouds block some of the sun's energy, but not all of it, so residents of famously weather-obscured cities like Seattle and San Francisco can still get good value by installing a solar array on their roofs.

To separate what's real from what's false in the world of electricity efficiency, hire an expert to conduct a home energy audit. A trusted professional can evaluate your home and appliances, show you where you can make cost-efficient upgrades and steer you away from useless or counterproductive measures.

Early in the month, American Airlines Flight 1420 crashed near Little Rock, AK. This crash, along with a few others that took place soon before and after, inspired research into the deleterious effects of sleep deprivation on pilot safety.

3) A Whole, Whole Lot of Drug Money

In June 1999, George Bush announced his candidacy for the office of President of the United States of America. So much was about to change in our culture during the next 8 years.

5) Lord Stanley’s Cup

via www.moviesonline.ca6

In June 1999, Stephen King got hit by a car and was flung 14 feet while walking on the shoulder of a road in Maine. What’s the name of that Stephen King book about the car? Oh yeah, Christine. Any connection? You never know. But I’m sure King was thankful Kathy Bates didn’t find him after the accident.

7) The Weird Looking Predecessor of the MacBook Is Born

That mildly annoying yet overall charming goofball Austin Powers (Mike Myers’s colorful character) graced the cover of Rolling Stone in June 1999, exuberantly celebrating the sequel to the original Austin Powers blockbuster smash hit. Smashing, baby!

9) Adam Sandler Tones It Down a Little

The universe’s hippest couple, who, of course played in a rock band together, hit the popular scene with their debut album in June 1999. Then, they became insanely famous. And then, thirteen thousand two-piece rock bands, featuring only guitar and drums, were born. I think now, 15 years later, we are finally beginning to see the decline in that questionable trend. Bass matters, people.

11) That Kid from Walking Dead Was Born

Venus and Serena Williams, two twin females from a socioeconomically disadvantaged place, won the Grand Slam female doubles event for the first time. They were the second sister team to win a Grand Slam event since 1890. This is the kind of thing that just makes you smile. These are some of the best ever to play the sport.

13) MORE TENNIS!

LED sign lighting provides years of illumination and low energy costs. sign modules that consume 50mA of power each. Required materials differ depending on sign size, module size, length of wire between modules, current draw, and lumen output.

Materials:

1. First, measure your sign. Although we recommend spacing module rows 3 inches apart, it’s ultimately up to you. If you want a brighter sign, place them closer together and vice versa for a dimmer sign. With the recommended 3-inch spacing, a 4-foot square sign would need 150 modules (15 rows of 10). Again, the quantity of modules needed  is based on many factors and can differ.

These LED sign modules are available in custom lengths of up to 20 modules per strand. Order 60 feet (4 feet x 15 rows) of stranded modules, and cut the strand after every 10 modules. Each strand can be cut to make two rows.

2. Next you’ll need to order a power supply that’s rated for the combined wattage of all sign modules. To ensure that you don’t overwork the power supply, confirm that the total wattage of your modules is at least 20 percent less than the power supply’s rated wattage.

An easy way to calculate this is to multiply the total wattage of your combined lighting by 1.2. In the 4-foot sign diagram, there are 150 modules with a current draw of 50 milliamps (mA) each. Since current draw is given in milliamps, multiply that number by voltage and move the decimal 3 places to the left to get wattage. This module consumes 50 mA and has 12 VDC operation, so it consumes 0.6 watts (50 x 12 = 600). Next, multiply 0.6 by 150 to get a combined wattage of 90 and multiply that number by 1.2 (90 x 1.2 = 108) to determine which power supply you’ll need. Since the result was 108, you will need at least a 120-watt power supply.

3. Next on the list is wire to connect all your sign module stands to the power supply. For a 4-foot sign, you’ll need 4 feet of 18-gauge two-conductor wire to serve as your main line plus enough to cover the distance between your power supply and where it will be wired into an electrical system. You’ll also need dual-channel T-tap wire splice connectors for an easy connection to your main line.

Before you begin working on your sign, turn off power to the area.

4. If there isn’t one already, drill a hole in the back of your sign as an exit point for your wire.

5. Use a tape measure or ruler to plot your row spacing. Leave space on one side of the sign for your module-to-main-line connections. Mount the sign modules using their double-sided adhesive and/or screw holes.

6. Insert the end wires of each sign module row into the T-tap splice connector, and clamp the other end of the connector onto the main line. The splice connectors eliminate the need to strip wire insulation.

7. Use double-sided foam tape to secure each T-tap splice connector to the inside of your sign.

8. Reattach your sign’s front cover.

9. Connect the main line to your power supply, wire the supply into your electrical system, and restore power to the area.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.