Technology is advancing at a dizzying pace. What used to be the ‘latest’ and ‘most advanced’ devices yesterday becomes redundant today. When people embrace any technology, they do so because it adds convenience, comfort and safety to their lives in one way or the other. When it comes to your home, all these three aspects matter a great deal. It’s why many people are now veering towards the smart home concept.

Sure, many homeowners already have Internet-based security systems and landscape irrigation systems that are connected to timers etc; but smart homes are designed and set up to do much more than that. Having a smart home is a lot about Wi-Fi connectivity and more. Take a look at some concepts; this will help you create a plan for your smart home.

It’s not uncommon for companies that launch smart home products to say that connecting their devices to the Internet is a breeze. Sure, they are bang on spot most of the times, but what actually matters a great deal is the Wi-Fi connectivity in your home. These are some of the things you will have to keep in view while planning your smart home:

This is vital, and it’s something you should keep in view while planning your first smart home. The longer the distance the radio waves have to travel, more the connectivity issues. The best way to overcome this kind of an issue is to install the Wi-Fi router at the center of your property and on the ground floor.

You will find a number of products which claim they are able to extend the Internet connection in your home. The simple fact is that multimedia over coaxial power-line adapters, network extenders etc tend to slow down the signal by around 50% and that reduces the consistency of the network. Of course, you won’t find any issues with driving a motion sensor or a smart bulb; however, you might just find it challenging to stream a movie to your tablet/laptop, only because it can’t figure out which Wi-Fi router it should connect to.

At times, installing a network of Ethernet cables turns out to be the best solution. You can use cable runs to install your smart home hub devices in spots that are more accessible. The devices that are connected to these hubs will function more smoothly if you do this. If your home is already wired for telephones, hardwiring for Ethernet won’t be too difficult. You will need to speak with your electrician and check whether he would be able to run an extra cable to the point you need it at, without too much of drilling and sawing.

When you are planning your smart home, ensure there are sufficient power points at different places in your house. While certain devices may be battery-powered, many aren’t. So whether it’s a Wi-Fi router/extender, web security camera etc, you will need a power point to plug them in. And of course you don’t want power cords dangling all over your smart home.

Very simply put, if you are building a new smart home or remodeling your existing one, sit down and plan not just for the current smart devices you plan to install, but for future ones as well. Map out a detailed plan and get some advice from the installer too. Coming back to the first point – focus on getting a very good Wi-Fi router and ensure its positioned at the right point on your property.

Very importantly, get a professional to do all the wiring work once you have your entire smart home plan in place. For more information about smart home device and hardwiring solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or by filling out this contact form.

Thanks for reading,1300 169 263

If you are thinking about beating the heat this summer with a new pool in your backyard, you will need to hire an electrician in Pasadena to complete the wiring. A new pool is an exciting toy that will lead to hours of fun for the whole family and of course, family friends. There are plenty of tools needed to keep your pool clean and safe to use. Tools like filters, pumps and heaters if desired, all require electricity. Water and electricity do not mix so it is important an experienced electrician, like those at The Electric Connection, complete the wiring for the pool to ensure it is safe. Even if you are choosing to go with an above ground pool, there is still some electrical that will be needed to operate the filter and pump.

The following are some of the things that will need to be addressed when bringing your pool up to Pasadena electrical codes.

*Depth of the wiring must be buried at least 18 inches for PVC conduit or 6 inches deep for EMT conduit. Your electrician can discuss this in more detail with you.

*Your pool will need a dedicated breaker and outlets to run on. The outlet needs to be no closer than 6 foot from the pool’s edge and no farther than 20 feet from the pool. This is the receptacle that will be used to power your filtration system, pump, heater and an automatic pool cover if you choose.

*Lighting inside the pool and around the pool area will also need to be installed by an electrician.

If you home’s electric panel is already maxed out, you may need to have a sub-panel installed to run the various equipment needed to keep your pool in tip-top condition. Give The Electric Connection a call and schedule an appointment to discuss your pool installation needs.