If you were gifted electronics for Christmas, it’s time to ensure their protection! The last thing you want is for your new computer, tablet, HD television, or gaming system to take on destructive surges, rendering it useless. Spare yourself the heartache of losing an expensive electronic gadget by using surge protectors.

Anything that has a plug is susceptible to surges. In fact, surges happen all the time, you just don’t know it. Not every surge has the capacity to fry your electronics and appliances right then, however, even small surges can shorten their lifespans.

Simply put, an electrical surge is a brief spike in the current, lasting less than a thousandth of a second. But don’t let its fleeting personality fool you, as a surge can be detrimental.

There are numerous reasons as to why you’re experiencing electrical surges. Large appliances such as a refrigerator, air conditioner, or even a space heater, when turned on, can cause a surge capable of damaging your electronics.

Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.

How many light bulbs have you changed in your lifetime? It’s a simple action, and often one that we don’t put much thought into, but what if the simple act of changing a light bulb could make a profound impact on the environment, and the well-being of future generations?  As experienced Plano Electricians, we at ElectricMan Inc. have made it our mission to help bring knowledge of Alternative Lighting Solutions, electrical efficiency, and environmental responsibility to the forefront of everyone’s minds. The reality is that even small changes can yield huge benefits when it comes to energy savings. According to www.EnergyStar.gov:

“If every American home replaced just one light bulb with a light bulb that’s earned the ENERGY STAR, we would save enough energy to light 3 million homes for a year, save about $600 million in annual energy costs, and prevent 9 billion pounds of greenhouse gas emissions per year, equivalent to those from about 800,000 cars.”

Think about the changes that you can make by simply replacing the outdated incandescent bulbs in your home as they burn out with one of the Alternative Lighting Solutions below. Here are some details on a couple of the most popular Alternative Lighting Solutions available.

Compact Fluorescent Lamp: Modern CFL bulbs for use in homes consist of a curved fluorescent tube and electronic ballast in a single unit, designed as a direct replacement for standard blubs. They use 3-4 times less power than comparable incandescent bulbs. These are great options to replace your standard light bulbs, but they do have a few small drawbacks. According to an article by PopularMechanics.com, while CFL’s do have a much longer lifespan than standard bulbs, they often lose some of their brightness long before their expected lifespan is up, and this is increased in fixtures that don’t allow for efficient cooling of the ballast located in the base of the bulb. Another documented fact about CFL bulbs is that they do contain mercury, which means that they must be disposed of properly by taking them your local approved recycling center. You wouldn’t throw a battery out with the daily trash would you? So you shouldn’t throw these out either.

Light Emitting Diodes: LED’s are a form of “solid state” lighting that have become available recently to homeowners as an incandescent and CFL replacement. Using small light emitting diodes mounted directly to circuit boards, these are highly efficient, and have fewer parts prone to failure, allowing for an expected realistic lifespan of 20,000 to 30,000 hours, when operated at recommended temperatures. While initial costs for these bulbs are higher than incandescent and CFL options, long term energy savings are where this alternative lighting option truly shines, with the average LED bulb using approximately 12-17% of the energy that it takes to run an incandescent bulb of similar output, the end result is a bulb that costs drastically less to power over time.

As a point of comparison, here is a simple chart of the energy usage of LED and CFL bulbs compared to incandescent bulbs, and the output associated with them:

Lighting technology has changed a lot in the past decade, and it is pretty amazing to see what could be on the horizon for future lighting innovations. Take this for example. While most homes will never need this amount of output, it’s pretty impressive to see that something the size of a Christmas tree light, like this plasma bulb, can put out more light, more efficiently, than the giant bulbs that we use in street lamps!

The great thing about these changes is that they aren’t something that requires a huge change in your lifestyle, so they are some of the easiest ways possible to help the environment, and lower electric bills while you are at it!

just 15 years ago. I wonder if any of the attendees at COMDEX thought to themselves “One day, I can cook my steak with the help of a tiny glowing tool that changes colors when my meat is cooked to perfection.” Probably not. Thankfully Sharper Image did, so now you can cook your steak and monitor it from your smart phone.