Refrigerators = Energy HogsSave 4% The refrigerator is one of the biggest energy-users in your home, and if it was built before 1993, it’s a huge energy hog. Be sure to keep the coils clean, and remember the more full it is the better a refrigerator runs!  Always purchase Energy Star rated appliances.

It is estimated that thousands of electric shock accidents take place each year, of which some are fatal ones. Aside from this, there are incidents of electrical fires caused by poorly-installed or ill-maintained wiring. It’s important to understand that most of these fires and accidents are avoidable. There are some simple things you can do to prevent an electrical fire from erupting on your property, including:

Never try to force plugs into the outlets and don’t remove the third prong which is the grounding pin, to fit it a plug into an outlet with 2 prongs. Do not plug in too many appliances into a multi-plug outlet.

Check whether there are any loose-fitting plugs as these can be a fire/shock hazard. If you notice that any of the wall plates are broken/missing, replace them without delay. So that the components and wiring aren’t exposed. If you have very young kids in your home, make sure that you cover all used outlets.

Check the cords for fraying or cracks. Pay special attention to ones that are placed in any high traffic areas or under rugs and carpets.

Make sure that the wattage of the bulbs is compatible with the fixture requirements. If you find any bulbs with a higher-than-recommended wattage rating, replace them immediately. It’s also important to ensure they don’t overheat and that they are screwed-in securely.

These should never be used on a permanent basis. Use ones that have safety enclosures to protect kids from burn injuries and shock.

There should be GFCIs installed in the kitchen, bathrooms, garage, basement and various other indoor and outdoor outlets in your home. Test these on a monthly basis to ensure they are working as required.

Only older properties have fuse boxes and these don’t have the capacity to withstand the heavy electrical loads required by modern-day equipment and appliances. It’s far better to get these older systems evaluated by a skilled electrician and replace them with modern circuit breakers.

Faulty or old wiring is one of the commonest causes of residential electrical fires in Australia. Get these checked periodically for loose connections, loose wall fixtures or wall receptacles. If you hear any hissing, sizzling or popping sounds behind walls or from sockets, call in your local electrician without delay to get these installations inspected and replaced. If you find that any switches or electrical fixtures are hot to the touch, get those checked as well. Flickering light bulbs are another indication of problems in the electrical wiring as well and it’s best to get a thorough check conducted.

If you find that a specific circuit breaker trips repeatedly, or you experience shock when you touch it, you should unplug it immediately and get it replaced or repaired. Check for damage or cracks in the connectors and wiring and install surge protectors to protect all your expensive electronics.

When you upgrade your home, make additions or add extensions like extra rooms or an extra storey etc., or even add a large number of new equipment or electrical appliances to your home, that can overburden the existing electrical installations. At this point you would have to increase the service capacity of your home’s electrical system.

We are a company that has been operating in this space for a number of years and have the skill, knowledge as well as the resources to install, maintain and upgrade all types of electrical installations on your residential or commercial premises. For more information, contact the Allround Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

We often find there is a lot of confusion between Lumens and Foot Candles and Lux. And even more confusing is how some represent conversion from traditional light sources like Metal Halide and High Pressure Sodium in terms of watts, and not lumens. So why all the confusion. Well, it may be because those who represent this conversion are trying to avoid letting you know about the efficiency of the LED lights, so they claim you can replace X watts of Metal Halide with X watts of LED. What they should really say is that you can replace a 400W Metal Halide with X lumens, and their lights only need Y watts to produce these lumens. We’ll dive into this a little later, but lets first talk about lumens vs foot candles vs lux.

What is a lumen? A lumen is a measurement of light related to (1) fixture or bulb. So when we talk about lumens, we say that a fixture or bulb creates (X) lumens. These lumens are determined by sophisticated measurement equipment.

What is a foot candle? A foot candle is a unit of measurement at a specific location in a room or outdoor location that is created by 1 to many lights. It is a cumulative reading of 1 to many light sources at a specific location. It is both real and calculated. Real in the sense that you can take a light meter and walk to any location in a room or outdoor location and take a reading that represents the amount of light recorded from all contributing lights or fixtures. Calculated in the sense that you can use software to predict the foot candles of a space based on the placement of lights within the simulation.

What is lux? Lux is identical to foot candles. It is a measurement of real or calculated light, but it is done on a different scale. As a rough estimate, 1 foot candle = 10 lux.

So, simply stated, lights produces lumens, and the cumulative lumens of all lights are then determine the foot candle or lux measurement of light at a specific point in an indoor or outdoor space.

In this blog, we talk a lot about potential dangers. From water damaged wires, to possible causes for power surges, we try to cover it all. Why do we spend so much time on this? Well, for one it makes for decent reading. Learning things is always kinda fun. For two, and the more important, is that electricity can be dangerous when misused or damaged.

At Kolb Electric, your safety is always the top priority. Second to superior service, of course. And today we’ll be covering something a little new (though we’ve mentioned it a bit here and there). Ever wondered exactly how safe outlets actually are? After all, they’re essentially tiny holes full of electrical potential located all over your home. Should you be worried? Well, it depends!

Contact Kolb today to get top-quality electrical outlet installation from our certified electricians!

It’s actually kind of a loaded question. How safe is a kitchen knife? It’s pointy and sharp. And there’s potential for injury there. But, if you use it right, there’s no real danger! It’s pretty much the same with outlets. When they are used properly, you shouldn’t have much to ever worry about. Oh, and the type is important, too.

What do you mean “type”?

Certain types of outlets should be used in certain ways for maximum safety and functionality. For instance:

Aside from these types and stipulations, there are some small things to consider. A damaged outlet is always dangerous. Even if it’s just a busted plastic cover. Skin, organic materials, or moisture coming into contact with an uncovered or damaged outlet can result in shock and electrocution. Never take chances with this.

We hope you learned some cool things today! And if you learned that some of your outlets might be somewhat unsafe, we hope you choose our experts to provide the electrical outlet installation services you need. Keep updated, and you should never have to worry about your outlets. Looking for service in your Rockville home? Contact us today!

It is the time of year parent’s relish—back to school. Summer has come to an end and it is time to gear up for fall sports and cooler temperatures. It is time to open the windows and enjoy the cool breezes that freshen the home and break up that stale humid air that has been trapped inside all summer long. Along with the cool fall temperatures comes the pesky flies. There is a way to keep your house cool, even on those warm days, while creating enough of a breeze flies won’t want to hang out for long. A ceiling fan will help stir the air in your house, giving you that fresh feeling you have longed for all summer and help deter flies. It is time to get a ceiling fan installed by an electrician in Los Angeles like those at The Electric Connection.

A ceiling fan is a fixture that not only serves multiple purposes, but it also looks great in any room. Your fan will help keep you cool in the summer, warm in the winter and give the entire room a nice, fresh feeling. You are probably wondering how a fan is going to keep you warm. Well, when your furnace is on or you have your woodstove going, the heat is floating up to the ceiling. That doesn’t do you any good explains an electrician. Los Angeles homeowners do not want to waste electricity or wood by heating the ceiling.

A ceiling fan helps to push the hot air down into the room, making the room and you warmer. In the summer, the breeze feels nice and the spinning blades pull the hot air up to the ceiling where you won’t feel it. A Los Angeles electrician can explain more about how this works. Give The Electric Connection a call today and schedule your ceiling fan installation.