his LinkedIn profile), an energy expert at Titan Energy and the author of today’s blog post, you have more control than you think over your home or building’s energy supply. Whether you want lower bills, more reliable service, or a better approach to the environment, you need to know your rights…

Since the Federal Energy Deregulation Act passed in 1999, many business and homeowners still haven’t exercised their right to choose their energy supplier. The ability for consumers to lower their energy costs, protect against rising rates, and, if interested, make an environmentally friendly choice, are all benefits of Deregulation. 3rd Parties help accomplish this by strategically purchasing the energy you use, in the same way the utility previously did, in the open market.  Depending on your state and the utility which serves you, the benefits will vary.

Deregulation dictates that your local utility can’t “Profit” on the supply of energy. Therefore, they don’t compete with 3rd parties, and shouldn’t care that you choose a supplier. However, you can still see this happen in states like Ohio (in certain markets), when they choose a supplier for you if you don’t choose yourself. Your local utility still delivers, services, and bills your account, as well as responds to any emergencies. This is where the utilities earn their profits.

By taking action, you can significantly improve your cash flow. Whether you own a home, a small office, or manage a nationwide organization, speaking to an energy professional can produce immediate and lasting results. First an energy consultant will analyze your billing and usage history. Next, the appropriate, licensed suppliers in your area will vie to be your energy supplier. Finally, your consultant will present you with options that meet your individual needs, whether they’re financial, environmental, or both.

For many homeowners, the presence of a smoke alarm within the home equates to pretty much background noise. You might ask about it upon purchase, or make sure there is one within your home that may or may not work. This shouldn’t be the case! A smoke alarm just might be the single factor between heading off a dangerous situation and major property loss. At Hoffman Electrical, your safety always comes first, and we would like to take a moment to let you know why adequate smoke alarms within your home are of the utmost importance to your safety.

For professional  Federal Emergency Management Agency (FEMA), there are nearly a million home fires in the United States each year. That’s nearly one in every three hundred United States homes! That is a concerning statistic, and damages include property damage and loss, and possible injury or loss of life. Ensuring you have the best chance possible of detecting, preparing for, escaping or mitigating a home fire is absolutely crucial.

If you’re in need of fire alarm installation, don’t hesitate to call Hoffman Electrical! The longer you wait, the greater the chance of extensive property damage and injuries! When you choose Hoffman Electrical, you receive:

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.