It’s incredible the way lighting can change outdoor spaces. As is the case with indoor spaces, spending comparatively little on lighting can produce dramatic results. A DIY outdoor lighting project might be just the thing to make you fall in love with your home all over again. But before you begin an outdoor lighting project, it’s important to think about your options. Here are 10 tips for 10 approaches to outdoor lighting.

1. Using Outdoor String Lights

Outdoor string lights are just great. But there are so many different kinds! Some have bare bulbs; some have lanterns. Some are LED; some incandescent. Some are white; some are colored. Make sure you research your options and choose the ones that are right for YOU!

2. Taking DIY Outdoor Lighting to the Next Level

Sure, you can install a standard low voltage lighting fixture and be justified when you say you Did It Yourself, but have you ever considered making your own DIY outdoor lighting fixtures? Mason jars seem to be the ingredient of choice when constructing your own outdoor lights. The internet is full of instructions for making DIY outdoor lighting fixtures, so do your homework and find the perfect project to make your outdoor area more luminous.

3 . Making it Modern

Let’s get weird! Isn’t that what modern outdoor lighting seems to say? I guess it depends on whom you ask. Modern outdoor lighting usually consists of interesting light fixtures with unusual, playful designs, and they can really make your outdoor vibe more interesting and thought-provoking.

4. Showing Off Textures

Sometimes you start with a particular light source in mind. These days, that light source is often LED. If you’re sure you want to use outdoor LED lights, you have a wide variety of outdoor LED light fixture types, from LED rope to LED tape to LED path lights, step lights, puck lights, recessed lights, and string lights. LED outdoor lights are highly efficient and look great. And some, like the one above, run on solar power! That means free!

8. Decking Out the Deck

If you are focused specifically on outdoor deck lighting, make sure you think about caution. Outdoor deck lighting should entail step lights if there are steps and should include lights around the perimeter of the deck. LED tape or rope, colored or white, are often great for running on the underside of deck railings.

9. Using Timers

Every home has a fire detection system. This vital safety feature should be well understood. Smoke detectors, carbon monoxide detectors and security systems give homeowners peace-of-mind. Furthermore, when combined with a security system, these devices work together to form a complete home protection plan.

The second type of detector is an ionization detector. It uses a small amount of radioactive material to ionize the air in an internal chamber. This in turn, generates a voltage that can be measured. By-products of combustion will change the voltage that is generated and trigger the alarm. This type of detector is better at identifying active combustion with little to no smoke.

While both types of smoke detectors will safely alert a homeowner to a fire, combination alarms exist that employ both methods. Consequently, the responsiveness of the whole system increases. Hard-wired detectors are also available which can be wired to trigger all the alarms in a home if anyone detects a problem.

In any appliance that uses combustion, such as a furnace or stove top, a potential exists for hazardous carbon monoxide buildup. This by-product is tasteless, odorless, colorless, and highly toxic in large concentrations. Therefore, a carbon monoxide detector is highly recommended. It will monitor the levels of CO in the air and alert inhabitants before they become dangerous. They are available as stand-alone units that can be plugged in to standard wall outlets or as combination roof-mounted CO and smoke detectors.

Home security systems have been around for decades and make use of a combination of sensors including door, window, glass-break, and motion sensors. Historically, these devices were hard-wired and fed back to a central control panel. Many modern systems make use of wireless sensors that allow for easy retrofitting of existing homes. Door and window sensors utilize a small magnet and magnetic strip held open when the door or window closes. If the magnet is moved away, the magnetic strip springs closed and triggers the alarm.

Glass-break sensors are placed near windows and use a microphone to listen for the distinctive frequencies associated with glass breaking. Motion detectors take advantage of a variety of technologies, such as passive infrared, microwave, or ultrasonic. This technology detects something moving within its range. These can be part of exterior security lights or interior motion sensors. Security cameras can also play a role in home security. Install them indoors or outdoors.

When installed and used properly, a home security system can easily increase home safety while reducing the chances of burglary or fire. Most insurance companies offer discounts for home security systems. Because of this, the entire cost of the system may be offset or eliminated altogether. Be sure to ask your insurance company about discounts to homeowner’s insurance for improving or installing a new security system.

Why is it you can replace some lights with more ‘advertised’ lumens with a LED light with less lumens. Here are 4 reasons:

1. Focused Lumens:

LED light is directional, conventional light sources are omnidirectional and require reflectors to gather the light and focus it to where it is needed. Any reflection that is over 1 bounce effectively loses the effect of the lumen. It has been proven that you can lose up to 30% of the effective lumens in this process.

The science of scotopic lumens is associated with a factor that allows us to adjust the photopic value to give a true representation of how useful the lumens are. The factor, developed by scientists, is an attempt to level the playing field. The factor is used to adjust the effective value of the lumen, either up or down from the advertised photopic lumen advertised on the package. Some lights, like HPS, have a factor that reduces the lumen amount. LED, on the other hand, typically has a factor > 1.7, which means the lumens it is producing is far more effective to us. Therefore, less lumens is required to do the job.

We have been very successful replacing 400W Metal Halide bulbs with our 18W LED tube, producing 1900 lumens, compared to a 32W 4 ft fluorescent tube, producing close to 2900 lumens. The main reason is all our lumens are coming straight down, where as only a small portion of the fluorescent tube is coming down and the majority of the light is requiring  a reflector to gather it and shine it downwards. After many projects, our customers tell us that it is brighter and feels better than working underneath fluorescent lighting

To Tampa residents, power outages are nothing new. We’ve dealt with all kinds of crazy storms and annoying weather in our time here, and it can be quite flustering if you’re not sure how to handle things. But if you’re prepared and know what to do, an outage can become little more than brief annoyance. Find out what to do during an outage with the help of the experts at Hoffman Electrical!

By Clarissa Allison | January 30th, 2015

RAB Lighting’s rectangular shaped LED Future Flood lights are designed to replace Metal Halide lights. The patent pending airflow technology ensures a long LED and driver lifespan. These fixtures are used for building facade lighting, sign lighting, LED landscape lighting and instant-on security lighting.  Following are the specs on the FFLED39 fixture.

LED Info Watts: 39

Color Temp: 5100k

Color Accuracy: 68 L70

Lifespan: 50,000 LM79

Lumens: 2,991

Efficacy: 66 LPW

Driver Info Type: Constant Current 120V: 0.4 A 208V: 0.25 A 240V: 0.22 A 277V: 0.19 A

5 Year Warranty

This cutting edge fixture comes complete with three multi-chip, 13Watt high performance LEDs.  It contains superior heat sinking ability with external Air-Flow fins. In electronic systems, a heat sink is a passive heat exchanger that cools a device by dissipating heat into the surrounding medium. It has high-temperature silicone gaskets, and a chip and fade resistant powder coat finish.

Your light will also have a heavy-duty mounting arm with an O ring seal and a stainless steel screw to aid in easy installation. The fixture is suitable for mounting within 1.2M(4FT) of the ground.  Its UL Lighting also makes it suitable for wet locations.

RAB LED products exceed industry standards for chromatic stability. RAB’s range of CCT (Correlated Color Temperature) follows the guidelines of the American National Standard for (SSL) Products, ANSI C78.377-2008. RAB LED luminaires have been tested by an independent laboratory and have received the Department of Energy Lighting Facts label.   The FFLED39 complies with California Title 24 building and electrical codes.